expensive product cannot even make a good video. haha
@nojabjonny Жыл бұрын
I replaced a runner already after a successful installation. Pulled the draw all the way out and went to return draw into slide and it grabbed a bearing and bent it all out of shape sending the first 2 bearings rolling onto the floor. These rails are not cheap , this is the 2nd rail I've lost bearings on now. I'm about to give up. 1000mm heavy duty lockable draw slides.
@julietbeasley4786 Жыл бұрын
🄿🅁🄾🄼🄾🅂🄼
@jeanbaptistetur9849 Жыл бұрын
Hello Good gestion : Where we can buy this machine ? Thank you for your help All the best
@SaqeebSamsoor4 ай бұрын
Where we can buy this system
@Fbi_2023 Жыл бұрын
How can I buy this ?
@johnnythompson7123 Жыл бұрын
no sound and how to open the slide bad video
@maryannjohnson3738 Жыл бұрын
I want to have this man's love child, yummy.
@beemawootton7947 Жыл бұрын
NO Audio
@tulsacrew31642 жыл бұрын
The person in that video has not been using tools for more than a few weeks at best. At least pay someone who is good with their hands to demonstrate assembly.
@arghyakamolroy77602 жыл бұрын
What is the software that you use to make such animations? Do you use cad file to prepare the models in this animation?
@MrStringybark2 жыл бұрын
It was only a few seconds into the video and I knew this was not going to be helpful. This guy is trying to draw a straight line while using the curved edge of the slider.
@TonyWhiteWatercolour2 жыл бұрын
The 250mm slimline slides don't seem to be full extension even thought they are advertised as such. Has anyone used these successfully? Am I just a dumb dumb that's missing something??? haha
@jordanmowbray16702 жыл бұрын
Be aware if your thinking of buying the 1200mm Extra Heavy Duty drawer slides that they sell at Bunnings. This is not how they’re installed and more importantly they do not come apart once they’re installed. Very frustrating, I called Goliath and they don’t want to know about it. Plenty of other drawer slides out there so I wouldn’t waste your time or money.
@virgilnorris43042 жыл бұрын
Hey mate I’m looking at buying the 1200. For a pull out van drawer. What’s the story?
@Gasspringscn2 жыл бұрын
great video
@jbooks8882 жыл бұрын
The absolute most important part of all and they didn't mention it! How much smaller should the drawer be than the cabinet. In other words how thick are the slides. I have found out from using these sliders that it is critical. You only have 0.2 mm leeway, so you have to get the measurements excruciatingly accurate.
@MrStringybark2 жыл бұрын
As I discovered also.
@jeffersontrippin7339 ай бұрын
How much smaller does it need to be? Let me know brother
@SpaceMonkey231016 ай бұрын
@@jeffersontrippin733Can't answer your question, but it might help to know that I just watched another video which explained that if you use the holes in the slide housing (ie. that which attaches to the cabinet) which are located on tongues inside C-shaped cutouts, it allows for some flex and therefore some leeway in the actual draw width. Here it is if you're interested: kzfaq.info/get/bejne/sN-Yppl7r6uUop8.html
@trouserbottomdog61202 жыл бұрын
This is a two-minute clip of watching a guy unscrewing and screwing a nut! Never mentioned what size hole needs to be cut to insert vent. 1/10
@mikemoore59292 жыл бұрын
I have bought the 500 mm DS500HD slides . It says you can weld the main runner to the cabinet , which i need to do . I don't want screws sticking out through the sheet metal . The problem is that the cabinet hardware seems to be unable to be dismantled like the drawer rail is . If i weld this assembled , i am sure that the plastic ball retainer will melt . Is there away to dismantle the 2 inner pieces that mount on the cabinet side ?
@timebert94672 жыл бұрын
Why to they turn the wrong way. Even old mate in the vid went to do it closing the toolbox. Can it be changed to turn the opposite direction?
@foroozantaheri13263 жыл бұрын
Hi. Thanks for this video. My gas lift has gotten stuck and the Piston is not working. Is there any ways to repair it?
@vkradio16563 жыл бұрын
Great presentation Ashley.
@MuchoJimbocho3 жыл бұрын
Video does not explain how to remove internal member from rest of drawer slide - if you have selected the runner with the push to open mechanism. Lever referred to in the video at Step 2 is only accessible once you get the unit apart, which is not explained. The answer is to put the runner horizontally across your lap with the ball bearings facing upwards then push inwards on the Right Hand end metal end (which is opposite to the end with the grey plastic semicircular pattern which would be on the Left hand side, facing upwards). It will pop open easily. Then flip the unit over in order to separate out the inner part. Look for the black lever and push away from your body to release the inner part.
@janheinrich17333 жыл бұрын
Umm 😐 nothing sus about looking under the table to plug yourself in. Other than that, good ad.
@erichender96843 жыл бұрын
What do I have to do to get 800 mil runners to close all the way ?
@uesinternational99513 жыл бұрын
Eric Hender how long is your drawer?
@erichender96843 жыл бұрын
@@uesinternational9951 the drawer is one meter ,we did finally manage to get the carriages to centralize, and the drawer runs smoothly now. Not too sure still as to what caused the problem .
@MTZ_ZTM3 жыл бұрын
Please tell me Where to buy it in Australia, I'm in Melbourne! Cheers🙏
@uesinternational99513 жыл бұрын
O' Zero we have a branch in Dandenong that you buy from
@MTZ_ZTM3 жыл бұрын
@@uesinternational9951 oh great then, can you please tell me the address, or the name of the shop? Cheers 🙏
@MTZ_ZTM3 жыл бұрын
@@uesinternational9951 my bad sir, I found it! I really appreciate it tho!
@uesinternational99513 жыл бұрын
Thanks everyone for their feedback. We are in the process of improving the details we include in our vidoe into the future and will definitely take your feedback on board. Is there anything in particular, besides what you have mentioned below, that you would like to see on this type of video?
@KevsGuide3 жыл бұрын
i suggest you get someone who doesnt know your product and try to do the installation, write down all their questions, and make a new video and talk in it. i can do a voice over for a moderate fee
@patdennis45763 жыл бұрын
You,d think in this day and age they’d have a decent video , for DYI . OPPOSITION DOES
@Cris-ig8el3 жыл бұрын
Great idea !
@uesinternational99513 жыл бұрын
Thanks Chris. It's a really simple and effective way of latching your door closed securely.
@brianwalsh81514 жыл бұрын
Odd that UES don't supply the full draw just the slide. Also strange that there is a Jeep on the side of this truck. I'm not sure that moving into the 4x4 market is really the right move.
@uesinternational99513 жыл бұрын
Hi Brian, Thanks for the feedback you've provided. Rest assured we have always been in the 4X4 market with our supply of hardware and associated items to canopy builders, 4x4 parts stores, off-road equipment stores and everything in between.
Great video - can you repair gas lift struts of stools, chairs ?
@uesinternational99513 жыл бұрын
This will depend on the size of the strut and overall condition. Call 1300 00 1904 to discuss this with our sales teams.
@vkradio16564 жыл бұрын
Great presentation and range of products. www.uesint.com
@uesinternational99514 жыл бұрын
Thank you VK Radio
@rolfschulz96514 жыл бұрын
what was that ??????????????
@millsa994 жыл бұрын
That was crap. No info and I even question the method.
@derickstevens96504 жыл бұрын
What is the tool called ? Where could one purchase the machine and controls ?
@graemewilson98134 жыл бұрын
No Sound No dimensions for side allowance to cabinet, rubbish video
@gayan1234514 жыл бұрын
where i can buy that machine ?
@lilin28524 жыл бұрын
The 1200 heavy duty lockable drawer slides don't come apart Does anyone know?
@billblake69544 жыл бұрын
Sound? What is the combined gap between the width of the drawer and the inside carcass width? So much done without explanation. Minimum carcass depth/clearance. is there a setback of the fixed slide from the front edge? øportunity lost to teach and give confidence to customers they can do the task comfortably.
@idontwantachannel30914 жыл бұрын
The gaps needed between each side of the drawer and the carcass depend on the slide model (heavy , medium, medium bottom mount, light, light lockable). This info and instruction sheets are on their web site www.uesint.com
@mechrojo5 жыл бұрын
Thank for that explanation. I often wondered how that was done. What gas is used? Thanks again.
@servalferretraficante40165 жыл бұрын
Thank you
@piano59975 жыл бұрын
Where can I get a nitrogen gas refill system like the one you show in this video?
@aravindr55595 жыл бұрын
Really useful sir, just one doubt......can these lockable gas springs carry a 200 lb or higher load.....pls reply
@Edu_RJR5 жыл бұрын
very nice! my english is bad but can understand how it works.
@murrman445 жыл бұрын
Where can I purchase the machine you are using to recharge the gas struts? [email protected]