I hope anybody who sees this, watches the official video "Behind Enemy Lines" It was a lot of fun making the video and special thanks to Tammo at Inspireality for the great production!
@inspireality3 күн бұрын
Thanks @MyEcoCycle! The link to that video is right here: kzfaq.info/get/bejne/gM51atGKsbPMZYE.htmlsi=DXfJYH7p1keOP3qd
@RichardKingADIАй бұрын
How to check for electrical faults... kzfaq.info/get/bejne/l8yAe9hqsdi2koU.html
@p38arover225 ай бұрын
Thanks for the video. It confirms the operation of the pump - I'd surmised how it worked after partial disassembly of my Karcher K2.080 today. It stopped giving high pressure water yesterday and had black oil dribbling out of the bottom of the casing. BTW, another source of pulsing on and off is a split O-ring on the quick connect mains water hose fitting (if used). I've had that happen a few times over the years. I'm reluctant to buy another budget Karcher - this one is my third. Oh, the generic name for a HP cleaner in Australia used to be Gerni after the Danish brand. I had a Gerni but it failed with earth leakage in the motor which would trip off the power.
@inspireality5 ай бұрын
Thank you for the feedback, and your own personal experiences with the Karcher. Your comment about purchasing another k2 begs the question as to whether the more expensive Karchers are any better dollar for dollar. My K3 (the actual one in this video) is going strong 8 years later and I used it for a continuous 4 hours yesterday and 2 today with no signs of slowing down. Perhaps the replacement parts (that I used)are of a better quality, or built to a higher standard. Maybe an idea would be getting an older, second hand unit for cheap, and then renuilding it with new parts...?
@p38arover224 ай бұрын
I finally got around to finishing the tear down of the Karcher. I’d done a partial strip but not the pump. When I opened it up, I found the nylon planetary gear had broken up. I still haven’t worked out why the drive assembly had leaked all the oil out. I wonder if the planetary gear is available. If needs be I’ll hunt down a cheap non-worker for parts. I wish I’d kept the last one.
@p38arover224 ай бұрын
I forgot to say, the planetary gear isn’t shown in your video, it is between the motor and the pump.
@inspireality4 ай бұрын
It's always nice to have a spare parts machine kicking about for troubleshooting, and for those parts only available as sub-assemblies at ridiculous costs. Thanks for the heads-up on the planetary set!
@juhanpuhm70205 ай бұрын
Nice work!
@inspireality5 ай бұрын
Glad you like it!
@juhanpuhm70205 ай бұрын
Beautiful area! Pretty silly and funny! LOLYBBJ!
@inspireality5 ай бұрын
Lolylbt!
@christopherallen95806 ай бұрын
Great job!!!
@inspireality6 ай бұрын
Thank you! Cheers!
@user-tt6yo1tx2j7 ай бұрын
This video has been very helpful, fixed low pressure problem , now it makes a screeching noise when it cuts off or handle is released, any ideas?
@inspireality7 ай бұрын
Could be air
@user-tt6yo1tx2j7 ай бұрын
Thank you it's working so I'll see if it disperses. Your video was really good and a great help so thank you
@inspireality7 ай бұрын
You're welcome! Glad I could help. Tammo
@jlach1007 ай бұрын
Great job!
@inspireality7 ай бұрын
Thanks very much!
@stevenc522711 ай бұрын
One of the best tutorial videos i have found, the spares are plentiful for the Karchers its a pity that they are so expensive even though most parts are made of plastic, i have a power craft washer made by Karcher its 18 years old, not used a lot, had to replace head, seals and micro switch, not bad really.
@inspireality11 ай бұрын
Thanks very much for the great reply! T
@YL-mc9oz11 ай бұрын
Nice and professional work, well done !
@inspireality11 ай бұрын
Thanks very much!
@user-po9sg3ks4p Жыл бұрын
Why does my power washer keep pulsating can you tell me thanks
@inspireality Жыл бұрын
Watch the full video !
@user-po9sg3ks4p Жыл бұрын
Ok
@user-po9sg3ks4p Жыл бұрын
Thanks from Ireland 👍
@inspireality Жыл бұрын
@@user-po9sg3ks4p you're welcome from Canada!!
@joezario1095 Жыл бұрын
Very clear and briefly explain video tq , i want to know is it ok to add 10w40 along with the previous grease?
@inspireality Жыл бұрын
10w40 oil is fine and will mix with the grease. Ultimately, the key is adequate lubrication.
@joezario1095 Жыл бұрын
Tq
@adrianinnavan3910 Жыл бұрын
Very useful video. I have a new K3 arriving tomorrow. If I'd known there was so much plastic in high pressure areas I might well have decided on another make. Now I feel ready to tackle any pressure issues if and when they arise. Thanks from a Welsh man living in the Republic of Ireland.
@inspireality Жыл бұрын
You're welcome from a Canadian who has visited Wales... in particular, the beautiful village of Guilsfield! Cheers!!
@user-ks2rh2pz1n Жыл бұрын
Perfect
@petarnenadovic8610 Жыл бұрын
Great video You helped me a lot I fixed my Karcher Thank you 👍👍👍
@inspireality Жыл бұрын
You're welcome! Glad I could help...
@brojoe787 Жыл бұрын
Top 5 all time intro right here folks.
@inspireality Жыл бұрын
Hey thanks!!
@robertlee4172 Жыл бұрын
Came to watch the Karcher repair, stayed for the sauerkraut demo and Neil Young cover. Cheers! From Thornhill.
@inspireality Жыл бұрын
Glad that you enjoyed! Cheers! Tammo
@mrdroid65 Жыл бұрын
ohhhhh my that looks amazing if you do it this summer call i want to learn how to do it i have never had fish this way looks amazing
@inspireality Жыл бұрын
Absolutely!😁
@shahidmomin340 Жыл бұрын
What is cost of changing the upper and lower body of Phantom 4
@inspireality Жыл бұрын
Current price lists for parts and accessories are available on the DJI website. If you carry out the repairs yourself, then labour is free, however if you bring to a repair/service depot, you are looking at around $300 for the re and re and subsequent testing.
@k14ser Жыл бұрын
Superbly described 100%
@inspireality Жыл бұрын
Thanks!
@inspireality Жыл бұрын
It's that time of year again when we make pirukad, haapu kapsas, and gringel! Cabbage was reasonably priced so Uncle Henn and I processed 26 good sized heads and ended up with two 6 gallon crocks of sauerkraut, now in the 8 week fermentation process. With any luck, they will be ready to bag and freeze by Joulud! Today we are making pirukad and our sisu (filling) consists of ground, smoked ham, sauteed onion, a few cloves of garlic, a cup of steamed rice, carroway seeds, and (when cool) a few eggs mixed in to act as a binding agent. Seasoning was pepper, a little salt, paprika, a pinch of cayenne pepper, some magic sarap (a Filipino flavour enhancer) and a pinch of cumin. The sisu needed a tsp. of sugar as well. We will be making the dough by hand as well and that will amount to 8 cups flour, 2 2/3 cup water, 1 tbs. each of yeast, sugar, and salt , 2 tbs oil, and 1 egg. Mix the dough, knead for 10 mins , and place in the fridge until needed, though keep an eye on it! When working the dough, only cut off as much as you can handle, keep the rest covered. Happy baking at 325 for 18 minutes or so! Also, don't forget to glaze the pirukad with beaten egg just before baking! Tervist!!!!❤❤❤
@kaylafarrell6038 Жыл бұрын
I'm so thankful for this my Ema used to make them ans she died before I knew the value of learning things from.her
@inspireality Жыл бұрын
So glad that this was there for you!
@steelgtr Жыл бұрын
My K2 has low pressure but not leaking?
@inspireality Жыл бұрын
Is the inlet screen clear?
@MrJS0972 Жыл бұрын
Just inherited a karcher 9000g commercial washer. I don't need it. What is it worth I I sell it. Can't find any info of its value. Thanks
@inspireality Жыл бұрын
Unfortunately most people don't appreciate the difference between a commercial grade Karcher and a consumer version. New, your 9000 would have retailed over $1000 I imagine because the pump is upgraded with brass as opposed to plastic and therefore able to handle hot water applications. The gallons per minute flow is much higher, and the gas motor is more powerful and heavy duty. To answer your query, I think that you could fetch 300 dollars if you can demonstrate it working. Hope this helps....
@uwetittmann1423 Жыл бұрын
Thank you for this great explanation and lesson!
@inspireality Жыл бұрын
You are very welcome Uwe!
@Mike-hb4pc2 жыл бұрын
This is the best, well scripted video I've seen on this. Very well done. Thank you. I think for me, however, that I will purchase a new pressure washer. Mine is like 8 years old, if not older. I don't want to throw $100 towards an old pressure washer when a new one is $200. At this point, if one thing is broke it won't be long till something else is broke. I end up spending a dollar to save a nickel. Plastic and rubber parts don't last forever. After seeing how this is made I'm surprised that it's lasted this long......
@inspireality2 жыл бұрын
Thanks for the kind words! I do concur that investing more money into an already well worn machine is an exercise in futility. My reservation in buying a brand new unit is only that perhaps the new ones are even of a poorer construction, being that we have invariably become a throw-away society, stemming from the era of the Bic lighter and Schick disposable razor. Case in point; I have recently serviced and resurrected several old brass valves (made in Canada) with new packings and seals (still available) as opposed to buying the "made in China" replacements which are not only cheaply manufactured, but non-user serviceable. Our reliance on off shore, inexpensive, throw-away items will, I believe, put us behind the eight ball in the near future. Alas, those who can fend for themselves with regard to self-reliance, or an inclination to mechanical or challenging machinations are a dying breed indeed! Have a great day. Tammo
@bobtytaneck84022 жыл бұрын
Thank you for an excellent video. Explanation is clear. I have a Karcher K5. It does nothing when I turn it on, doesn't make a sound. I have verified power to the unit and run water through the pump for 30 minutes (to get rid of any air in the system). It worked perfectly when I put it away in my heated workshop for the winter. Any Ideas on what the problem is?
@inspireality2 жыл бұрын
Sounds like the pressure switch is stuck. Try exercising the on/off switch repeatedly for a few minutes to free it up.
@bobtytaneck8402 Жыл бұрын
@@inspireality Thanks, I will give that a try.
@patrickmorganelli65852 жыл бұрын
Great video, but cutting the motor wires is definitely a mistake, as removing the coating on the wires is a huge hassle and is problematic. Also, using solder sleeves is not a good idea, as the vibrations inherent in flying the drone can loosen the connections. It would be much easier to just unsolder the motor wires from the ESC boards and then resolder them afterwards. If you followed this video and cut the wires, you should painstakingly scratch the coating off with an Xacto knife, then also use sandpaper, and then carefully tin the wires with solder and solder together. Other than that this video was extremely helpful though. Thanks!
@malutanpetronelАй бұрын
but why is it a must to cut or unsolder the wires... I did not open my drone but apparently the wires could come out ?
@amomchilov2 жыл бұрын
At 7:50, do you have any idea what those notches are that are cut out near each of the pistons? I have water leaking out of those, but I have no idea why it was open to begin with, so I'm scared to seal it
@inspireality2 жыл бұрын
The notches in the housing allow for any seal leakage to escape. If you have leakage, you should replace the seals.
@amomchilov2 жыл бұрын
@@inspireality Hey there, thanks for taking the time to write back! Are these the seals your referring to? www.toolsid.com/karcher/12-mm-x-20-mm-x-5-mm-grooved-seal-mpn-6-362-875-0.html Part no. 63628750 on this parts list: www.m-and-d.com/pdfs/Karcher/5970-5550.pdf
@inspireality2 жыл бұрын
There is a compatibility chart with the link that you sent me so make sure that your model is listed. These are the seals that I mentioned in our previous conversation. Good luck, and pls write back with your results!
@mrdroid652 жыл бұрын
sorry not stalking u i just love this song and listen to it all the time... :o)
@inspireality2 жыл бұрын
Glad you are enjoying the music Connie!
@mrdroid652 жыл бұрын
great work i really like it..you sound awsome Tammo...
@inspireality2 жыл бұрын
Thanks for listening Connie!
@energeticvids2 жыл бұрын
Thank you. I have hard water. I cleared out the wand tip & the entry filter, but my Karcher unit still has an even low pressure (no leaking or pulsating). Where next can I check for lime build up ?
@inspireality2 жыл бұрын
i believe that your valves in the head assembly are probably calcified or worn. you will need to disassemble, and then inspect the plastic valves. if you refer to the video, you will see what I am referring to.
@inspireality2 жыл бұрын
check the video around 12:30
@energeticvids2 жыл бұрын
@@inspireality Thank you. Not a quick fix by any means. Mechanical things used to last longer when they were made from metal, not plastic. My Kenmore washing machine from 1980 still works fine.
@kaganarisut2 жыл бұрын
hello. mine is always at on state even knob is at 0 position. any advice to fix ?
@inspireality2 жыл бұрын
you will have to disassemble the unit and test the switch for continuity with a multimeter.
@kaganarisut2 жыл бұрын
@@inspireality thank you. I disassemled unit and switch was not in its place. I corrected its position and now ok.
@inspireality2 жыл бұрын
Excellent work!
@mrdroid652 жыл бұрын
WOW you sound amazing Great job...WOW :o)
@inspireality2 жыл бұрын
thanks Connie!!!
@mrdroid652 жыл бұрын
great song.. you sound awesome
@inspireality2 жыл бұрын
Thank you Connie!!❤😎
@terencecossey27052 жыл бұрын
Very good demonstration and well explained every step of the way. Thank you for a quality repair video.
@inspireality2 жыл бұрын
you are very welcome. i'm glad that it helped you out!
@cadechiron7352 жыл бұрын
Please answer Does the Phantom 4 Standard and Phantom 4 pro have the same shell and are cross compatible or not?
@inspireality2 жыл бұрын
The original Phantom 4 only has forward looking and down looking sensors whereas the pro has additional sensors. The two drones are not the same so I would speculate an incompatibility as far as the shells are concerned.
@cadechiron7352 жыл бұрын
@@inspireality thanks for the information😁
@bobsimon22422 жыл бұрын
Nice relaxing , very clearcut demonstration.
@inspireality2 жыл бұрын
Thank you very much!
@nathanielreid49672 жыл бұрын
👌👌👌👍👍👍👍👍👍
@inspireality2 жыл бұрын
thanks!!!
@raymaharaj35552 жыл бұрын
Excellent..thanks
@inspireality2 жыл бұрын
Most welcome!
@ferenclucas28422 жыл бұрын
What an excellent video thank you
@inspireality2 жыл бұрын
you are welcome! glad it was well received....
@johnleotv58112 жыл бұрын
Looks delicious
@inspireality2 жыл бұрын
They are very tasty, and great with a bowl of soup on a cold day
@patrickgillis97592 жыл бұрын
What year did this model come out?
@inspireality2 жыл бұрын
not entirely sure, however I bought this one around 2003 I believe. still works great!
@bigbirdgonewild2 жыл бұрын
That was wacked.lol
@inspireality2 жыл бұрын
Hey, long time brother! Have you got some good rides in since we talked at the landing at Gibson? Be nice to plan a future engagement!!! Tammo
@inspireality2 жыл бұрын
Ok, here's something with a little more sanity..... kzfaq.info/get/bejne/mqiSfK1n0by0YZs.html
@paulfowell95322 жыл бұрын
Great video very clearly explained thanks
@inspireality2 жыл бұрын
Thanks!
@cliffcaverley23772 жыл бұрын
The COVID-19 virus is evil and caused this terrible disease. I was in shock and disbelief. It’s not a sprint; it will be a marathon unfortunately
@PierreGoep2 жыл бұрын
Thank you for your video. It was extremly instructive and thanks to you I brought my Karcher back from the dead. By doing such an awesome tutorial you keep the original spirit of internet alive: sharing freely informations and knowledge worldwide. I would have never been able to fix my machine without you. Greetings from France.
@inspireality2 жыл бұрын
Thank you for the kind words! I'm so happy that this tutorial is helping others. It makes the effort so much more worthwhile! Salut!! Tammo
@russellheath43322 жыл бұрын
Great I wish I could do that by my self.
@inspireality2 жыл бұрын
Thanks! Just need to practice it a few times... it will come. T
@MatteoGuarducci2 жыл бұрын
The pressure of my karker k2.75 is very low can you help me? What could be?
@inspireality2 жыл бұрын
Did you watch the video?
@MatteoGuarducci2 жыл бұрын
@@inspireality yes but i can't find the solution
@Mm1twiggy2 жыл бұрын
Half a million views? Endless money pits!
@inspireality2 жыл бұрын
Yes. Should have monetized this video!! Obviously lots of issues with these machines...