I ain’t hating but I just seen A1 auto women and she didn’t do all this 😅

Not worth the watch you bagged on the dudea for not explaining how he got to a certain point and then i heard yoi ramble about how much money you saved then said how your not gonna get into a 30 min center console remove im just looking for the first step or somthing but get nothing

Thank for the info bro. Spent 15 minutes trying to find the oil filter from under the car lol.

I finally came up on a video that explains my situation lol, I was getting frustrated with that vent not getting out🤬 I might have to do it like you. When you put in the new actuator in, did you cut a little bit of the shaft or just put it in like it came out?

Throttle body needs a serious cleaning.

I am having this problem right now except mine is blowing out of the defrost vents only and won’t blow out the other vents . Rear air works , but will stop working at times and blow only hot air , front air will blow cold just isn’t blowing out the correct vents …. I got two small boys and I have to have air blowing !! Help !!! Any ideals ?? Also a female here , I know some about working on cars , but not everything . Hence why I’m here … 😅

Gracias hermano me as hecho fácil mi problema de verdad muchas gracias

I'm fixing to have to change mine to glad I saw this video lol

that was not helpful at all!

From Indonesia

Hi, I have a 2003 expedition and I changed out the 2 rear actuators by watching one of the guys on YT @FordTechMakuloco and it was worth it as the dealership will do you dirty just because! I'm in the process of changing the front actuator but I need the correct one! Its a semi tough job for us rookies but very worth it when the job is done! Thanks for your input! I'm actually looking for the gears inside the actuator as mine have broken.

You gave no explanation on how to remove the vent between the actuator and the floor. It needs to be removed to install the part.

Hey this is 3 years old i went through every ford print out and after watching found it instantly

I'm in the middle of this right now got it tore apart now wish me luck

ridiculous

I live in L.A. CA., and it would be easier and cheaper for me to fly you out here than for me to go thru some DIY frustration or deal with the Ford dealer labor and parts mark up😖 2001 Expedition. Cool video fam👍🏾👍🏾✊🏾

Yours is the only video on the net about this. Tried doing this job and still couldn't get that door actuator out. It's jammed between the under dash and that unit. Mine is a 1997 Ford Expedition. Ford dropped the ball on this one. Freakin Morons. All just for the money. Thx for the Video 👊

This video was incredibly helpful. I needed to replace both the blend door and the actuator on my Ford 2001 f150 súper cab and nowhere in the internet I could find a representative video. Most videos showed that it is easy to remove the black air box but in my case I had the floor vents in the way. This was the only video that showed the same problem. Thanks to the video and other folks’ comments here: here was my fix: there is no way to remove the black box (without removing the dash), therefore to remove the broken actuator i had to saw off the old shaft and pulled it out. In order to put the new one in, I cut about 1/4 “ off the new shaft which made a huge difference in buying me clearance to shove the new actuator in. It was all very hard and stressfully but finally made it and the actuator and blend door are functioning. Thanks a lot!

Thank you. You helped me out big time! God Bless

Man... I'm almost to that prying that bitch out. Thanks for the video. Good to know I'm not the only one that thinks those other videos are trash. They remove everything and then start recording talking bout this how you fix it.

How much would you charge to do this particular job ?? How much is a fair price for this job . Mine also needs the heater core changed. How much is a fair price to change both pieces ?????

Thank you for helping us from getting ripped off at the dealer

Thanks I well do my truck tomorrow and you was very very helpful to do the job

Bless you 😇

What was your problem, mine won't blow heat,nor vents not blowing out

How did you remove the bottom black box after removing the carper?

Thanks i have console out i appreciate your video now if i can get motor out without breaking anything they sure do not want this job done by anyone but them i refuse to pay that much money,but i live in atlanta and have to have my ac have a blessed day!

I'm about to the job thank you

Do you do appliance repair?

Was is hard to pull the carpet? I have never pulled it back before. Any tips? I appreciate it!

Love the video man! Very informative and love how you word things. Very straight up.

Marcus.... On the 2000 Expedition Blend air door replacement.. Did you have to remove or cut carpet and I didn't see you remove that air duct. Did you just displace enough to get the blender out?

have you ever thought of laying sod or pulling weeds for a living ?

Hey big bro I like this type of stuff new supporter. I'm a house flipper I'd like your support on my page thanks hope you win the give away on my page thanks

THANK YOU Boss Life for this Very Helpful video Man I Love you for it!!!! God Bless

You are a clever person. I went through it on my 96 explorer- and i could get my actuator out (behind glove box). The BLEND DOOR was a b&^ch though. Had to cut into the bottom of the heater core holder to drop it out. Anyway I'm sure you have saved many folks lots of time and $

Got it finished under an hour. I avoided the screw driver prying. removed the 2 front 8mm screws, slid a hacksaw blade to cut the rear plastic tab that bolts the actuator in place. Remounted using only the frt. Screws. Being a fabricator, mechanic. I think it should be sufficient enough to hold. I then used the blade to cut the top of the lip of the floor vent duct housing, it helped in removal and install. I also cut a 1/4" off the top of actuator shaft that made it easier to put in. The actuator shaft points up in when in place.

I'm in this perdicoment now, thanks for info. You sound like Tim Meadows "The Ladies Man". Great job go pour yourself a glass of co-vas-cee-a.

To be honest I listen to Boss Life...... I don’t really watch the video

The history is off but the energy, point, and message is fantastic. Keep up the positive energy

Don’t ever put yourself in a position to take from your child........ life lesson one!

Always gotta keep moving!!

Nice video, bro!

Cool Vlog bro, it's on point! Gonna sub. Check out my channel if you can :)

I'm 14 and my biggest dream is to live in Hawaii I really dislike the cold weather ( I live in Canada ) I want to have no worries have enough money but I don't know what to do to make my money.

Appreciate seeing our people on here grinding. If we keep putting in the work every day, we are going to see success. Only time we fail is if we stop trying. I subbed. Keep up the good work!

I like it! It’s all about mindset. New mindset new doors.

Man I ask myself everyday. ;) Great video. subscribed

People will give U want U want, but they won't give you what U need. Now that was a Word! I support your movement.

You are not that good !! 😢