Thanks man I just received the coolant over flow tank installing mine now
@NVSRides9 сағат бұрын
Glad you found the video. Mine is still working great. Thanks for the comment.
@andersabrahamsson67519 сағат бұрын
Thank you for this video, which was very helpful for me.
@NVSRides19 сағат бұрын
I'm glad it could help. Thank you for the comment.
@tun2095Күн бұрын
Excellent video thank u
@NVSRidesКүн бұрын
You are welcome. Thank you for the comment.
@troyholland34367 күн бұрын
I got a question gor the same bike my back tire bearings are pretty worn out don’t notice it too much when riding but is that a big deal?
@joshuacotter609613 күн бұрын
Nice truck. Did you have to use adapter or did you plug directly into factory wiring? I have an 1983 W150, having issues now that they're installed.
@NVSRides13 күн бұрын
Mine just plugged right in and see still working great. Not sure what to tell you. I have them on older vehicles as well with no issues.
@M70ACARRY14 күн бұрын
U can buy the front shocks for it. They also make a springer kit for the front forks. Lots of junk ones for sale locally. Just get one and swap out the forks if u need suspension. They even make a spring base plate for the seat. It adds height, too.
@M70ACARRY14 күн бұрын
Coleman rebranded this model. It's now called the Viper HS200. It's identical to the CT200u. Only the name has changed.
@Knicksfan241614 күн бұрын
6 years later
@harleyd985716 күн бұрын
Switching to a GT-40 upper & lower intake, but is the EGR spacer actually required if I’m doing an EGR delete too? This is for a 92 Foxbody
@demetriuscooksey714718 күн бұрын
Just wish the LEDs weren't so freaking expensive.
@NVSRides18 күн бұрын
They are not too crazy. I think these lights range from on sale below 50 bucks to 60 bucks. They are still going strong today.
@javonnypaung262922 күн бұрын
How do you take out a governor on a GMB100 mini bike?
@thomasbartlett340925 күн бұрын
I can tell your vehicle is not driven is salt . My 97 has been through every winter in northern Vermont and I have been using the "Power Stop" system as well. Unfortunately, Road Salt Kills the Power STOP Rotors and have to be replaced about every 3 years.
@NVSRides25 күн бұрын
It was a Utah vehicle that was used only during winters and stored for the summer. It had issues but I bought a few new ones from southern states and live in the south now and it is so nice to work on these when they have no rust.
@thomasbartlett340925 күн бұрын
@@NVSRides FYI, Be sure to bleed the antilock module on the fender. Air will get trapped in there and make your brakes spongy. kzfaq.info/get/bejne/d7xpnruQ1smUeIU.html
@NVSRides25 күн бұрын
Great point. Thank you for that tip.
@arresthillary950229 күн бұрын
starts 5:25 just twist the light in normally and plug the plugs together. done
@trail_trackerАй бұрын
It’s an amazing bike for sure. What battery and where did you buy? Mine came used with no battery
@MalikCooley-wn2nrАй бұрын
Can you do a jack shaft bearing installation video
@ErniePeaglerАй бұрын
Video was a great help. Would add that on a 2004 Suburban, there is what looks like an ECM and a vent tube blocking access to the part. You can pop the vent piece out, and a 7mm socket can remove the bracket for the ECM-looking box. The box drops, and there is the part you need access to. Hope this helps, and thank you for a very helpful video.
@allshow4allАй бұрын
What’s your instagram? Thanks 🙏
@allshow4allАй бұрын
Great Video Here… did exactly what you said boss Good Deal!!!… appreciate it will do a video as well and post… great awareness 💪 😊
@leftyguyiamАй бұрын
Thank you thank you thank you. My 99 suburban got stuck in a nasty parking garage and I did not want to leave it over night. You saved the day!!!!!
@NVSRidesАй бұрын
Glad the video was able to help. Thank you for the comment.
@StrawIsEpicАй бұрын
My biggest gripe is the way the tail lights are grounded from the factory. When I got mine, none of the lights worked, and I had the same previous owner problem. I'm still trying to work to get the rear turn signals to work properly
@NVSRidesАй бұрын
I wish you nothing but luck on your hunting. Wiring can be a huge pain in the butt. I really hope you find the issue and can move forward to the next part of your project
@NVSRidesАй бұрын
Thank you for the comment. I really appreciate it.
@StrawIsEpicАй бұрын
@NVSRides I've decided I'm going to try running a ground wire to the front, either going to the battery terminal or the ground cable going to the block
@lonetum9Ай бұрын
Replaced this part and it’s better but it still kinda does it sometimes any insight?
@NVSRidesАй бұрын
Take the part off and go without for a few and see if it happens. Might just be a bad part, especially if it is Dorman made.
@NVSRidesАй бұрын
Just remember it will shift out of park with no foot on the brake.
@MichaelSharp-sq4soАй бұрын
I did this job the other day I used ACDelco plugs instead of autolite plugs.my autolite plugs were double platinum plugs.my ACDelco plugs are idrioum plugs
@user-cm8xz3kh4zАй бұрын
Little quieter
@NVSRidesАй бұрын
Might quite down a little more when I go over the rear axle. Thanks for the comment. Appreciate it.
@malbers35Ай бұрын
I like the old exhaust better... it was installed better too.
@drewnashtyАй бұрын
Frostbite sounds like she has glasspacks, yuck. I still have the Flowmaster 40s on my K5, H pipe to two 40s at either side from when I first got her with the stock 350 and Hooker headers, I put in a 383 stroker with 226/228 cam on 110 LSA and it sounded like baldeagles back in the day. Now she has a stock 5.3L ls with stock manifolds in her with the same 40s and exhaust, piecing together a cam kit as we speak. I can't wait to hear her resurrected on a lopey idle.
@NVSRidesАй бұрын
I myself go back and forth on getting rid of those mufflers on Frosty. I know it would sound amazing with some 40 series mufflers. Sounds like you k5 had had some good motors in it. How long have you owned it?
@drewnashtyАй бұрын
I don't mind the fuel pump noise with the key on, it lets me know it's priming.
@Mega007007007007Ай бұрын
What size is the tire on the rear rims ???
@braydencarter9521Ай бұрын
Wayy cleaner with the black, bigger size fits nicely too!
@NVSRidesАй бұрын
I agree they made it look a lot tougher and newer in my eyes. Thanks for the comment. I appreciate it.
@FrancisBeckaАй бұрын
What's the difference between the CT200Uand the CT200U-A?
@Pro2cool4uАй бұрын
That looks 10x better, really works with the tint!
@NVSRidesАй бұрын
I fully agree with you. These are some of my favorite wheels Chevy makes.
@robtdv69Ай бұрын
You got to get rid of that nylon gear or it will blow up
@TheCanadianBubbaАй бұрын
I would need to leave the credit card at home ! LOL !!!
@NVSRidesАй бұрын
I think I will order from home next time or I will be in trouble myself lol. Those engine dress up kits were calling my name.
@Pro2cool4uАй бұрын
That's sweet, bro! Im glad you finally got out there!
@NVSRidesАй бұрын
If you get the chance to go, you really should. You have one near you in Nevada.
@TheCanadianBubba2 ай бұрын
That works, and you can always revisit and upgrade👍 Back in the Covid deal i bought some knock off Flowmasters single in, double out. Put tips on them all, so far so good ! Great to catch up man !
@NVSRidesАй бұрын
I plan to one day upgrade but for now it works great and I am way more happy with the sound. I know there was nothing wrong with the glasspacks, but flowmasters are the king for me. Thank you for stopping in.
@TheCanadianBubba2 ай бұрын
She still a total sweetheart 👍
@NVSRidesАй бұрын
I feel the same way. I let her sit and when I come out she is happy to see me.
@TheCanadianBubba2 ай бұрын
Great to hear the blazer is well and sorted 👍 Do you still have the Nova ?
@NVSRidesАй бұрын
I do still have the Nova just so many other things are taking over and pushing it off. I hope to have the Nova back in the spot light really soon.
@TheCanadianBubba2 ай бұрын
Great to get catching up with you Cam. Awesome save with that 👍
@NVSRidesАй бұрын
I was very happy to be able to get that out and not have to pull the head. Thank you again for the support and love you have always shown the channel.
@Noah-ju7ks2 ай бұрын
Thanks man great video 👍
@NVSRides2 ай бұрын
You are welcome. Thanks for the comment.
@Pro2cool4u2 ай бұрын
It's good to see Frostbite back on the streets!
@NVSRides2 ай бұрын
I agree with you on this one. It needs some work, but it's still very solid.
@darianfrisbee84332 ай бұрын
I got 32mph on mine by getting full throttle. Haven’t removed the governor yet but I can’t wait to see what happens when I do!
@P-nutBD2 ай бұрын
Recently did a trip consisting of Costco > south of Indy > back to the same Costco for 284 mi (according to google maps, trip meter said 281.4mi) put back in 14.81 gal. which I still don't believe it, calculated 19.17mpg (284mi). '88 c1500 reg cab 8' box, 350 (5.7L), 4-sp auto, 3.73 ratio, 235-75r15 michelins, ALL Stock except has an edelbrock open air pan and a a Flowmaster super 44 muffler, ((still has stock cat and air inj.)
@NVSRides2 ай бұрын
That is really impressive. I have a 1500 suburban than only gets 12. They are all over the place as far as mpg's go.
@TOMMY-WANT-WINGY2 ай бұрын
Will a 30 series torque converter limit the engines top speed?
@Deucealive752 ай бұрын
It can depending on the gearing.
@TOMMY-WANT-WINGY2 ай бұрын
@@Deucealive75 I had the 50t on the rear and I'm 280. Could only get it to 25-27. Engine wouldn't get to top rpms. I switched to the 72t rear and now go 35-37. I want to bypass the gov next
@Deucealive752 ай бұрын
@@TOMMY-WANT-WINGY Nice! Yeah gearing plays a big part.
@braydencarter95212 ай бұрын
Oooh hell yes. Cant wait to see the Camaro hit the streets again!!
@NVSRides2 ай бұрын
You and me both! Thank you so much for the comment and support. I really appreciate it.
@heartbreakkid87082 ай бұрын
Beautiful stable
@NVSRides2 ай бұрын
Thank you so much for the comment. I am very happy and grateful for it myself.
@mudtiremedia2 ай бұрын
Don’t you just love when a 1 hour job turns into a 1 day job!! Haha. It looks so clean that you would believe they would have really been doing full tune ups though.
@NVSRides2 ай бұрын
That is what I thought as well. Guess we were both wrong, lol. It was great to meet you and get to check out your journey on your channel.
@mudtiremedia2 ай бұрын
@@NVSRides same here! Let me know when you’re ready to regear a diff and we will shoot some content on it.
@NVSRides2 ай бұрын
@mudtiremedia I am game whenever. That is knowledge I have always wanted to have. I will start looking until parts for the car.
@trentpipkin_06702 ай бұрын
I didn’t know there was a part 2 and my bike had been sitting in the garage for 2 weeks cause it was doing that
@NVSRides2 ай бұрын
I am sorry. KZfaq wouldn't let me add onto the video back in the day so I just made a part 2.
@braydencarter95212 ай бұрын
"Thatll fly off as we go down the road that'll be fine" lmaoo. glad you could get it fixed!!!
@NVSRides2 ай бұрын
I am glad you commented on that lol. It is true though right?
@Pro2cool4u2 ай бұрын
Those are some sweet battle scars lol. Glad you got the plugs out without dropping anything into the cylinder!
@NVSRides2 ай бұрын
I hope to not be in this position again but it was a good learning experience. Battle scars are where it is at. Lol thanks for checking out the video. I really appreciate that.
@heartbreakkid87082 ай бұрын
Recent tune-up??? Oh lord
@NVSRides2 ай бұрын
Don't think I could have said it any better myself. Thanks for stopping by and the comment.
@culturelimp44032 ай бұрын
Holy shit THANK YOU! Simple and easy to understand, you showed where it was and now I am not embarrassingly stuck in front of a customers house anymore!!!
@NVSRides2 ай бұрын
Glad I was able to help. Thank you for the comment.