Apparently, if a dog sneezes while communicating means he's got a bit of anxiety. 😊 very cute
@WayneP197310 күн бұрын
I didn’t know that. Thank You. 😊
@Rob_Shoot17 күн бұрын
I am looking for a second can for my other 5.56. I own two rugged suppressors, already the obsidian nine and the razor, which I both enjoy very much.
@WayneP197317 күн бұрын
The Rugged surge X looks really good has a lot of great features.
@Rob_Shoot17 күн бұрын
@@WayneP1973 I was looking to that as well, but right now budget wise, Alaskan 360 might be a little bit better for me. I’ll give it time and see how the much the surge X will go down.
@WayneP197317 күн бұрын
@Rob_Shoot surge X well have much superior sound suppression over the 360. My son has the surge 7.62 and that thing is very quiet. But the 360 is very versatile on a lot of calibers. I would get a silencerco 36m /46m over the 360 if I had to do it over.
@Rob_Shoot17 күн бұрын
@@WayneP1973 if it has better suppress quality then I’ll probably save up then 🤓
@Rob_Shoot16 күн бұрын
Well, I come to the conclusion to doing a lot of research lately and I’m actually gonna go get the B&T 5.56 suppressor.
@Willdo22Ай бұрын
You expected to pull this off as that many rounds 😂
@WayneP1973Ай бұрын
I clean it every 500. This is a review after 3000 rounds. And honestly yes I think i could shoot 3000 and pull it off as you say. 😂
@gap338lmАй бұрын
Your method is commonly called "The Dip". It is HIGHLY TOXIC. The chemical reaction of the white vinegar and hydrogen peroxide dissolving the lead residue creates a lead soluble solution called lead acetate. Lead acetate is a hazardous material that can be absorbed transdermally through the skin or insufflated by breathing in the fumes causing severe lead poisoning. It is not safe to pour it down the drain or in your yard either. It must be disposed of properly through a hazardous waste facility. Depending on where you live it may be a criminal offense to improperly dispose of lead acetate. While it is highly effective to clean rimfire suppressors this way, and some manufacturers like Thunder Beast Arms recommend it, care must be used when doing so. Proper PPE consisting of gloves, an approved respirator, and goggles or face shield should be used in a well ventilated area. It is also not safe to use on aluminum as it can damage the aluminum. www.thefirearmblog.com/blog/2016/07/05/the-dip-a-toxic-mixture-used-to-clean-silencer-parts/
@lw7333Ай бұрын
He’s a cutie 🥰
@lw7333Ай бұрын
That’s a good doggy
@lw7333Ай бұрын
My pups do this too ❤
@ForguefamilyАй бұрын
Be careful, the collar gets stuck on the rack and it scares the dog so bad, you’ve got dishes flying everywhere, the dogs yelping trying to get away, it’s a mess, I speak from experience, it happened to me, twice
@lauradistefano9398Ай бұрын
E questi sono i cani feroci? da come dorme sembra un bambino ❤❤❤❤ è rilassato 😂😂😂😂
@PrayingPandaАй бұрын
Is this "dip"?
@JenniferNasinАй бұрын
Dj
@helenacorreia6405Ай бұрын
That dog is so adorable
@WayneP1973Ай бұрын
Autumn says Thank You. 😊
@TheSouthernDemocratpartyАй бұрын
How is a wall going to stop that?
@WayneP1973Ай бұрын
No chance 😂
@ourrealestatejourney_originalАй бұрын
He was bussed here from Texas.
@WayneP1973Ай бұрын
😂😂😂
@TheSouthernDemocratpartyАй бұрын
😂😂😂
@Joshua89754Ай бұрын
God bless you too, thank you!
@user-je5li3nr3lАй бұрын
Bellissimo ♥️♥️♥️♥️♥️♥️♥️♥️♥️
@TkTongoonaАй бұрын
Cuute
@fitbody3602 ай бұрын
Aluminum safe?
@WayneP19732 ай бұрын
Nope
@JayBird-vc5vp2 ай бұрын
HI HUMMINGBIRD ARE WONDERFUL AND BEAUTIFUL BIRDS THANK YOU GOD FOR BLESSING ALL OF THE ANIMALS IN THE WORLD 🌍🌎🌎🌎🌎🌎🌎🌎🌎🌎🌍🌍❤❤❤❤❤❤❤❤❤❤
@lovetofly322 ай бұрын
The camera frames wont allow us to see the difference. Looks to spin the same direction both times
@WayneP19732 ай бұрын
Thanks I didn’t realize.
@cgcgcg696 күн бұрын
I see you got new gear share that
@stevenelson95132 ай бұрын
DUDE YOU NEED TO SHOW THE RESULTS , USELESS VIDEO, WASTED MY TIME.
@WayneP19732 ай бұрын
Thanks for the useless comment. If you’re in KZfaq your time isn’t that important. Move on. Bet your the life of the PARTY. Lol
@danielgrubb96682 ай бұрын
Does the Griffin Armament Cam-Lok act as a booster or do you need to install both?
@WayneP19732 ай бұрын
You will need both the cam lok is just a quick detach device. You will still need a piston and a booster to cycle you semi automatic action. Wayne
@fernandomesa84562 ай бұрын
Wayne.
@WayneP19732 ай бұрын
Fernando
@Gawl883 ай бұрын
I tried your method on my new Oculus a couple of nights ago after putting about 300 rounds through it. While it did get a lot off there was still a lot left on I couldn't get off no matter what. Tried the same solution in an ultrasonic cleaner, soaking them in gas and using several other options. In the end, soda blasting was the ticket. Took all of 10 mins to soda blast them clean of all lead buildup. After that I tossed them in a media tumbler I purchased from Cabellas as you suggested and they look amazing. Thanks for all the tips, your video helped a lot!
@WayneP19733 ай бұрын
Yeah, that powder residue was tough stuff. I usually have to do some scraping after my secret solution is done😂😂, but for the most it works pretty good. I don’t have a soda blaster. Stay cool 😎
@grantguice17413 ай бұрын
Im new to suppressors. Do the baffles come out for cleaning like all the other ones?
@WayneP19733 ай бұрын
No, on the Alaskan 360 the baffles are not removable. It’s not really an issue though.
@grantguice17413 ай бұрын
@@WayneP1973 I’m between the Alaskan 360 and the Liberty Suppressors mystic x
@WayneP19733 ай бұрын
@@grantguice1741 I would recommend the Mystic X. After owning the Alaskan 360.
@Gawl883 ай бұрын
Great video! Looking into getting a media tumbler, are you using a rotary or vibrating tumblr?
@WayneP19733 ай бұрын
I use iguana bedding I get it off of chewy.com. It’s cheap and is the same as Tumblr media that you buy. 👍
@harrisonrenner38373 ай бұрын
That looks like spring valley 🤔
@WayneP19733 ай бұрын
Yes Sir
@DevinS4293 ай бұрын
Curious did you have your Mark IV threaded by a gunsmith or is that a specific factory threaded model?
@WayneP19733 ай бұрын
Factory… MK IV tactical.. absolutely awesome handgun.
@DevinS4293 ай бұрын
@@WayneP1973 thanks - figured! Now that I have a suppressor I may need to swap my standard mark IV target for the tactical so I can use it on multiple firearms.
@WayneP19733 ай бұрын
@@DevinS429 check out silencer shop Ruger mark IV. 3 inch barrel. That’s my next gun.
@joshredden94163 ай бұрын
What tumbler and media do you use?
@WayneP19733 ай бұрын
Believe it or not, I use iguana bedding, that I get off of chewy.com. It’s super cheap and it’s basically exactly the same as regular tumble media. Don’t tell anyone. lol 😂
@jjmckay6man14 ай бұрын
If you shoot the proper size endcap for the caliber you are shooting it will help a lot..lol They do make 5.56 and .30 cal endcaps. they should nitride the tube rather than ceracoat,
@WayneP19734 ай бұрын
I agree I have the 7.62 flash hider end cap seems to help.
@jjmckay6man14 ай бұрын
Awesome I am glad!@@WayneP1973
@KN-cool3 ай бұрын
Is it worth the $100?
@WayneP19733 ай бұрын
@@KN-cool It’s a well made flash hinder end cap. I think 70 would be a better price point but the suppression game isn’t cheap.
@kegankirby14604 ай бұрын
I just use brake cleaner on my baffles but not the tube body
@TheGreatWhiteNorth14 ай бұрын
I kind of regret getting it honestly. I bought it for the weight + larger bore + durability specs compared to others. After getting it, i realized 50% of the can has no baffles. It doesn't suppress very well on anything other than pistol calibers. I have to wear hearing protection on 5.56 ar-15 so therefore it doesnt do what its intended. 😢
@WayneP19734 ай бұрын
I agree with you 💯 I regret it also. There are much better options available hybrid 36 or the hybrid 46 would be my choice knowing what I know now but unfortunately it was my first suppressor and I didn’t know any better. I feel like it could have a minimum of two more baffles in the 360.
@clay45423 ай бұрын
Just so you know, no matter what suppressor you get for 5.56, you should use hearing protection as it won't be hearing safe.
@TheGreatWhiteNorth13 ай бұрын
@@clay4542 I have multiple suppressors that are perfectly hearing safe on 5.56. why does that myth keep popping up. People keep saying that because they heard someone else say it. A good suppressor will make pretty much every round hearing safe.
@clay45423 ай бұрын
@@TheGreatWhiteNorth1 5.56 is supersonic and is not hearing safe. You might be fine with doing a couple shots without ear pro but any more than that will start causing damage. A quick google search says that anything over 85db will start causing damage. You guys are making it sound like you have magical suppressors that can break the law of physics and make 5.56 hearing safe. Go to pewscience and look at the data, some of the best suppressors on the market only lower the db of 5.56 anywhere from 132db to 140db.
@clay45423 ай бұрын
@@WayneP1973 over 40 years? Well there is always something new to learn, go to pewscience and look at the data.
@patwalsh28684 ай бұрын
Thank you for sharing your experience with the Alaskan 360 , I appreciate it in real sound , now my mind is made up to get one , for my first Suppressor 😊Thanks From Commy Ct💥🔫🇺🇸
@WayneP19734 ай бұрын
Your Very Welcome. Alaskan 360 is a very versatile suppressor. dedicated cans will be slightly quieter, but they’re not nearly as versatile. Wayne
@JosephCwalinski-jr2ym5 ай бұрын
How did you mount that 360 on that rifle? Direct thread or RUM mount device??
@WayneP19735 ай бұрын
1/2-28 Direct Thread. YHM mount. Cheaper than rugged direct thread.
@JosephCwalinski-jr2ym5 ай бұрын
@WayneP1973 How are you liking that rifle? I'm really considering one, and I also have a rugged 360
@WayneP19735 ай бұрын
Citadel rifles are awesome have one in 357 and 44 mag. 38 special and 44 special are giggly quiet in the lever guns suppressed.
@mikes8915Ай бұрын
Hows the first round pop with the 38 special? It's bad on my single shot 300 blk out with subs almost sound like supers
@WayneP1973Ай бұрын
@mikes8915 Very little first round pop with .38.
@WorldWideCleaning5 ай бұрын
what trigger do you have in your ruger? How do you like it?
@WayneP19735 ай бұрын
Valquartson internals tandem cross trigger. It’s really good.
@DanandEmi5 ай бұрын
I have one in my cart right now... I have wanted a 22 surpressor for so long.. How long was your wait? My father waited 7monthes but I've heard as long as a year.. Im impatient..
@WayneP19735 ай бұрын
I waited about 8 months buy one and forget it. I’m waiting on a Banish 30 now 5. 1/2 months in so far.
@tylersullivan48225 ай бұрын
I just got mine back in 95 days. It’s getting faster
@virtuaguyverify4 ай бұрын
Just got my oculus 5 1/2 months
@randyleonard47975 ай бұрын
Well thank you .We need more caring animal lovers out there like you.
@HugsXO5 ай бұрын
You too! Mine gets tucked in too, but for some reason he wants his nose covered too. Whstever makes him happy makes me happy. 😊
@randyleonard47975 ай бұрын
So cute
@randyleonard47975 ай бұрын
❤😊
@amandalewis23565 ай бұрын
He seems very happy to be yours ❤
@amandalewis23565 ай бұрын
I’m sorry I mean she no he, sorry miss Autumn ❤
@janicealley50335 ай бұрын
How sweet❤
@nodwell58135 ай бұрын
I have one of my own
@carriec185 ай бұрын
YOU DIDNT MAKE A PROPER VISOR SO NO LIGHTS GET IN THE EYES! You amature. Lol
@WayneP19735 ай бұрын
lol My Bad.
@nancylynam45775 ай бұрын
You forgot to boop the nose 👃
@breakingthisdown5 ай бұрын
Stinky baby
@ArtistVanda15 ай бұрын
❤❤❤❤❤❤❤❤
@shatteredmercury14445 ай бұрын
Omg I love them
@lynnarthur14115 ай бұрын
Awww. Your baby looks like a little eskimo. 🥰
@kendallsue65565 ай бұрын
I do this to my babies every night. So flipping cute. ❤