yes sure

yes it can! however once you´ll use oven for melting plastic do not use oven for food application again. :)

@@plastmakers thank you very much!

Hello, I do not sell plastic products anymore. I can offer you a mould and you can make them by yourself if you want. :) Let me know if you are interested.

Hey 👋 I have a shredder equiped with motor

@@plastmakers I am still a beginner, so I would like to start with something electricity free. I have not so large amount of plastic to work yet

@@zodd0001 on Precious Plastic website you can find also hand powered shredders. I know that Plastic Preneur sell a small hand powered shredder. But I would say that performance will be very small.

Thank you, I sold plastic joint sets, but at the moment I do not have enough parts. When I produce new parts, I let you know.

I do not recommend to build this design from wood because of lower stiffness. If you want to make a wooden press visit @brothersmake chanel they built similar press

@@plastmakers okay, thank you :)

Hello 👋 thank you for your comment. I do not have experinece with PVC tubes, however joint design which I used for my projects is not suitable for connection of tube profiles. On internet you can find different joining technique for PVC tubes. On KZfaq there is video "ZIP TIE Domes" 👍

@@plastmakers Thanks for coming back to me Tomas, greatly appreciated 👍

Hello Eduardo, this project is open source, it means you can copy or upgrade it. If you are interested in your production of plastic conectors, I can send you offer for moulds if you want. :)

Hello Seras, if you are still interested please send me delivery adress and I prepare price offer for you. 👉 [email protected]

Thanks for message 👍 when you mix and melt different HDPE types it will stick together. But it will be difficult to make products with the same properties and apperance. I would say, that separation is more important for injection moulding. When plastic does not have good flow properties, its required to apply more force.

@@plastmakers ok I see! Would you consider it problematic creating a simple sheet from different hdpe types? The only requirement would be that it looks good. It doesn’t have to be very stable 😅

@@larsfischer2253 compression moulding is foolproof technology 😅 it should not be problem 👍

Thanks Thomas this video is great and very helpful! My sister and I are just starting out and we were thinking of mixing Hdpe plastics so it’s good to know this is a bad idea. We are in the process of buying a machine (injection machine like the one you bolted to the wooden pallet). Do you think this will be too hard for 2 girls to do? It looks like it takes strength? Can you recommend and injection machine, shredder or small compression machine?

@@becanadevencorn3876 Hello, thank you for message 🖤 Firstly, its good to hear that you want to start ♻️ Precious Plastic machines are good for beginners and small workspaces. If you want to build machines by yourself there are usefull Starterpacks on Precious Plastic website. If you want to buy ready to use solution, visit Precious Plastic Bazar there are sellers from different countries😉 Its good to read sellers review. And one more advice for you, make a simple cost estimation. For example when you buy injection moulding machine or compression moulding machine, you also need moulds which will cost some money. I am sure girls can handle plastic recycling activities. Example when I jumped on lever is really extreme. 😅 Usually its easy. If you need more answers, send me email: [email protected] or for faster response Instagram

Thank you

Hello, in May I sell moulds that I used in video. If you are interested, please send message at [email protected]

Thank you, I just added new content to Plastmakers Instagram profile, so check that out 🙂

Thank you

Hey Tony, good question. In the end of video I mentioned next possible concepts. This year I decided to cover it with PE foil to make a greenhouse. More info on my IG: instagram.com/p/COtI_pbnjgm/?

Hello, for diameter 6m you need 30 struts lenght 1575,5mm and 35 struts lenght 1780,6mm.

Zdravím, nevýhoda drcení materiálu pro 3d tisk jako je PLA, PETG je spékání materiálu během drcení. Dokud je mechanismus studený je to v pohodě. Ale po zhruba 10 minutách na velikost drcení 5mm se nože zahřejí a pak je to komplikace, než zase vychladnou. Ale jde to. Na Maker Fair, který nyní probíhá v Praze je tento drtič jako součást expozice Průša Lab, kde z drceného materiálu tisknout na místě nové výrobky. Ať se daří. T.

It was in hobbymarket. Just type "orbital grinder" there are many options how to find one :)

Hi Edis, depends on application. I like properties of PP. It has good strenght but also flexible. I tried only PETG for smaller prototype joints for door frame and it works well too