Joes any O video

Пікірлер

@tommyacuna4032 9 күн бұрын

Thanks for sharing your movies. I was on USS Hanson DD832 out of San Diego 66_68 on our way to Yankee Station. Many memories.

@487joe 9 күн бұрын

Thanks for coming on the ride.

@proudliberal605 11 күн бұрын

USS Lang (FF-1060) <------------------My Ship

@487joe 10 күн бұрын

thanks for riding along.

@vance387 11 күн бұрын

I was on USS VANCE DER 387 1959-1960. I and two other high school classmates joined the Navy together, boot camp together, all got orders to VANCE together. One of us has passed away, the other and I are still in contact.

@487joe 10 күн бұрын

Thanks for the view. Just checked Vance's DB and didn't see your name posted. I looked for Lauie. Would you please go to ussvance.com and make a log entry. Leaving yours, your two buddies names also. Just to keep the ships roster close to being accurate. Thanks, Joe webmaster ussvance.com

@lorenkolb9994 12 күн бұрын

It was a Rabbit 🐇.

@487joe 12 күн бұрын

Possible. But the cam is 3 feet off the ground and the cam face reflection. Its the reflection that's strange. There is nothing but open ground for 20 feet then brush.

@Washadamoak 13 күн бұрын

It's a waste of time

@Me2Lancer 16 күн бұрын

Thanks for sharing, Joe. My ship USS Brister DER 327 was one of several DER's (Destroyer Escort Radar Picket) ships who cruised together from Pearl Harbor to Vietnam in March 1965. Each DER became area commander for a zone of the coast of Vietnam.

@487joe 16 күн бұрын

Glad you enjoyed the trip. I made three of those runs back and forth.

@eddiefordiii770 Ай бұрын

Powerful machine- great job Sir 😇

@487joe Ай бұрын

Thanks and thanks for the "sir"

@jellymcnelly3611 Ай бұрын

me when i see bro (its been an hour)

@JamesDanek Ай бұрын

I thought that was in 1961, or did in happen twice

@487joe Ай бұрын

I wasn't on the 397 and this is the information received from Dale.

@maltaconvoy 3 ай бұрын

Can you please identify where the film breaks at each location? Guam I think I know, and Hong Kong I know, but I can't tell where Taiwan starts and ends and Viet Nam starts. Thanks for any help.

@487joe 2 ай бұрын

Been a long time and I didn't shoot the film. However, 748 is Taiwan with the Dragon. I'll pass your question onto Ed to see if he remembers.

@maltaconvoy 2 ай бұрын

@@487joe Okay thanks so much, Joe. Please tell Ed I really enjoy this film, I have watched it more than once. Little known history, great photography, great music, too.

@487joe 2 ай бұрын

@@maltaconvoy ERd, is checking the org box the roll of film came in. Hoping to find the dates and places. If he finds it it'll be posted.

@maltaconvoy 2 ай бұрын

@@487joe Thanks a bunch, Joe. 🙏🏻

@billbarringer8459 3 ай бұрын

We just purchased a homestead and with it came a Gravely Professional 10. We are unfamiliar with the machine. Any suggestions on getting it started or an operational manual fir the controls. Any advice would be greatly appreciated! Have a great day! 🇺🇸

@487joe 3 ай бұрын

Bill you've got a sweet machine. The best for part I have found is Richards Gravely 1-800-827-4551. DK tractors and stuff rebuilds. As for the controls there are just forward and back, hi/low and PTO. If it doesn't have a key then it is a pull start. Which I know nothing about. Good luck with it.

@BALOYBEACHBUM 5 ай бұрын

My Dad was stationed on the USS Finch DE 328 during WWII, I myself, prefer Cruisers! '75-95!

@487joe 5 ай бұрын

you don''t know what you've missed!

@maltaconvoy 5 ай бұрын

What port is that 9:20 to 10:20? Hong Kong?

@487joe 5 ай бұрын

Yes Sir it is. Spent many weeks there as station ship.

@maltaconvoy 4 ай бұрын

@@487joe Excellent video, excellent music. Thanks so much for this.

@mn7803 6 ай бұрын

Your video brings me back to the time period when I served on the South Vietnam Navy HQ-1 (USS Camp converted to the South VN navy in 1971). Thanks for sharing!

@487joe 6 ай бұрын

Glad you liked it. The guy who built the RC model was in the Army. Looking for something different to build.

@DKTractors 6 ай бұрын

😢

@487joe 6 ай бұрын

Its going to a good home... Hard to admit but the solid attachment are much to much for me to handle.

@davidenos7085 7 ай бұрын

I enjoy the video, it also reminded me of Navy days. Also all my time was East coast, USS Macon CA 132 and USS Forrest Sherman DD 931.

@487joe 7 ай бұрын

I never saw the East Coast. Went from Brainbridge to Hawaii in 65 to Vance.

@robertcarlson4666 7 ай бұрын

I was on USS crusty crab when my ship CO SpongeBob got loc'd out on shermstick(PCP) and needing some old fashioned buttbanger action he found a newbie sleeping in his rack when he had been posted for firewatch This CO butt raped him with no condom or KY jelly then made this dumbass ksuck the shit off his dick when he busted his nut

@zaitonyahya4768 7 ай бұрын

Tj4092 @tj4092 to of the most

@michaelgallagher2663 7 ай бұрын

U. S. S. VANCE. Once Commanded By LCDR Marcus A. Armheiter. You Have To Read That Story.

@487joe 7 ай бұрын

Thanks for the tip. But don't have to read the book I was on board! You can find MAA stuff on ussvance.com. Thanks for writing.

@user-fj2rh5js6t 8 ай бұрын

Super!!!

@gordonhosking3900 8 ай бұрын

Mate where can i order tractor and mower

@487joe 8 ай бұрын

They haven't made these for years. Try e-bay or other site.

@gordonhosking3900 8 ай бұрын

Mate how can i order a tractor and mower

@user-mc1it9zj1o 10 ай бұрын

Hey there Pineapple Fleet sailor.....you've brought a grin to my mug. Most everything brought back memories and i just felt 50+ years younger. Hele On Brah....mahalo.

@487joe 10 ай бұрын

Thanks for jumping onboard

@ricksadler797 11 ай бұрын

Great video thank you 😊 ❤

@487joe 11 ай бұрын

thanks for watching

@denniswright807 11 ай бұрын

Same ports when I was in the navy 😊

@487joe 11 ай бұрын

Funny how that happens, Dennis. Thanks for watching

@JoseLopez-hx2gs Жыл бұрын

Oh deer...

@487joe Жыл бұрын

That's just what its looking for

@samuelvelez7068 Жыл бұрын

Looks good what was the total cost for something like that?

@487joe Жыл бұрын

#samuel velez About 1200 bucks a lot of years ago

@4sl648 Жыл бұрын

Very nice! I bought a 1990 Pro 10 last fall and it works well. I saw the video of you sh=owing your grandson how to change attachments and mow. I hope you are both doing well.

@487joe Жыл бұрын

#4SL thanks. The grandson is now a foot taller than me and still has all his toes. These are hard machines to kill. I've had mine under water. Drained and refilled the oil a few times and it still runs years later. I wasn't paying attention when backing near a stream...

@shazlanalias-gd7yu Жыл бұрын

Fjiuhhh .. 😢, 😅😅😅Zzz jj. ...

@johnirby493 Жыл бұрын

I'll pay you by the hour to mow my grass.

@davedisinger1245 Жыл бұрын

Damn Squids! We bitched about it at the time but we will never forget it.

@487joe Жыл бұрын

Dave I must have been one of the strange ones; I liked it! Thanks for watchin.

@mn7803 Жыл бұрын

Good job, Joe! Thanks for sharing.

@487joe Жыл бұрын

Thanks for watching MN

@myassizitchy Жыл бұрын

My son just finished his A school in Pensacola now hes in Oceana naval AFB finishing C school. Hell be an aircraft mechanic on the Gerald R. Ford. The newest carrier. Super proud of my boy. We both are war buffs and military memorabilia collectors. Hes living OUR dream as we speak. So proud of him and super jealous at the same time..GO NAVY !

@487joe Жыл бұрын

And proud you should be! Thanks for watching.

@MitzvosGolem1 Жыл бұрын

Excellent 👍

@487joe Жыл бұрын

Thanks for watching

@markwalker2307 Жыл бұрын

... and ?

@487joe Жыл бұрын

your guess is as good as mine

@frankthomas9553 Жыл бұрын

Exelent

@487joe Жыл бұрын

Glad you liked it frank. Machine still runs great.

@christopherroyluna2877 Жыл бұрын

Unless provoked, Coyotes are afraid of humans. Right?

@christopherroyluna2877 Жыл бұрын

Are these wolves or coyotes? Are there wolves in the area? Love.Wolves & Coyotes

@487joe Жыл бұрын

These are coyote. As far as I know there are no wolves in the area.

@christopherroyluna2877 Жыл бұрын

Love Coyotes. #ProtectCoyotes

@487joe Жыл бұрын

Be nice if they took a rabbit or two.

@matthieuboisvert6382 Жыл бұрын

it is normal that the first shear pin in the front always breaks?

@487joe Жыл бұрын

No it isn't normal to break. Going into a hard packed bank or ice to fast will (could) cause the breaking. In the long run its better to change a pin. Just don't put a heavier pin in its place. Then you would be looking for trouble. Run the blower flat out for best results.

@christopherroyluna2877 Жыл бұрын

Love Coyotes. Love Wolves

@fitch8363 Жыл бұрын

I like the three stage design. I've had that snow blower's 28" two stage Columbia (made by MTD) brother since 2010. Still looks and runs like new. Model 10528PC with the 357cc engine. I've used non-ethanol gas in it since day one. Great engine. The thing is a hungry animal in deep snow. Powers right through it. The engine is a torque monster. Mine still starts first pull. It had a surging problem which was annoying but didn't affect its snow blowing. I fixed it by drilling out the pilot jet with a #74 drill (0.0225") held in a pin vise. donnyboy73 has a great video on how to do that. Other than that, with normal preventative maintenance for a snow blower, anti seize on the axles, oil changes, etc. it's been trouble free.

@487joe Жыл бұрын

Impressive work. Gave mine to my daughter, so don't know how it is doing. Thanks for the information though.

@denniswhite166 Жыл бұрын

I really miss the days of my youth. I have a lot of good memories. Thanks for posting this video Joe and bringing those good memories forth.

@487joe Жыл бұрын

Glad to have helped, Dennis

@denniswhite166 Жыл бұрын

I really enjoyed the Shell Back initiations. I am a Shell Back and fondly remember my initiation aboard USS Midway CVA-41.

@denniswhite166 Жыл бұрын

What does the rating "SO" designate?

@487joe Жыл бұрын

Capon was a second class sonarman SOG2

@denniswhite166 Жыл бұрын

@@487joe Thanks Joe. I googled it but couldn't get an answer or maybe I missed it.

@487joe Жыл бұрын

@@denniswhite166 try a military site next time, Dennis.

@denniswhite166 Жыл бұрын

May I ask what inspired you to build a model of this particular ship?

@denniswhite166 Жыл бұрын

BTW - This model is fantastic. The detail is amazing. The fact that it actually sails and swivels its guns and shoots is over the top realistic! I was half expecting the asroc to fire and bring a damaged model sub to the surface!

@denniswhite166 Жыл бұрын

Spinning radar antennae are the icing on the cake. I can imagine myself in CIC glued to a scope!

@487joe Жыл бұрын

I did not build this RC Vance. It was built by Steve Bucanan from Florida. He builds RC ships and was tired of the standard fair. He contacted me and I talked him into the Vance build. I sent him ship plans and he talked with the crew. The only thing he added which was not on the ship. Was the launcher on the fantail. Other than that and the speed of the model even the sounds and smoke color are as it should be.

@denniswhite166 Жыл бұрын

@@487joe If you are still in contact with Steve please convey my greatest congratulations on this astounding model. BTW I stood aft lookout watches on the island of the USS Midway - the stack gas would give me sore throats - that's what I thought of when the Vance started spewing smoke.

@christopherroyluna2877 Жыл бұрын

#ProtectCoyotes #ProtectWildlife

@487joe Жыл бұрын

a day before this at least two coyotes were scrapping. Just out of cam range but you could hear them. This is probably one of them.

@christopherroyluna2877 Жыл бұрын

#LoveCoyotes #ProtectWildlife

@jamesives4375 Жыл бұрын

First

@lumpylumpy3931 Жыл бұрын

Seen a button Buck

@487joe Жыл бұрын

Thanks for watching lumpy.

Ең жақсы KZfaq

Пікірлер