Got a power blue hard handle today snd the kit to convert but mine didn't come with a new faceplate so gotta wait till next week
@BenFenner2 ай бұрын
No mention of the skin wedge? I love mine!
@egbluesuede12204 ай бұрын
I own this set and would buy them again for sure. They are really well made.
@gtcam7235 ай бұрын
It’s probably designed to break before something more expensive does. Not unheard of in some fields. We all know someone that would use one and slap a freakin breaker bar on it.
@gtcam7235 ай бұрын
It’s probably designed to break before something more expensive does. Not unheard of in some fields. We all know someone that would use one and slap a freakin breaker bar on it.
@rosieotis7 ай бұрын
These are GREAT! Bought a set thanks to Doc on Last Best Tool.
@timothyhartley79868 ай бұрын
My snap on man has 10 of those ratchets hanging on his ceiling. I wanted one but when I initially seen that I didn’t want it anymore. I don’t like to see the failure point on the tool as soon as I grab it and look at it.
@jeffwolf80188 ай бұрын
Doesn't that make the ratchet extremely weak. That just seems like an insane thing to do. The original looks so much more beefier than this with less than like maybe a quarter inch plus they have a big drill going through the center of that for that ball detent. There's got to be some little material there you put any kind of angle or twisted the wrong way I see that thing is snapping right off on you. Best of luck with that part...
@tomthompson74009 ай бұрын
you dont by chance have a 30 tooth 1/4 drive wheel that youve taken out laying about that you would sell ,,
@Rudimentary00710 ай бұрын
Subbed. Love those bits.💪👍🇺🇸
@fyler110 ай бұрын
I bought the Tekton set, but I do have a snap-on pocket pry bar that stays in my chest pocket. These will definitely have their own uses, and I love Tekton's glass-reinforced nylon handles.
@eastcoastken10 ай бұрын
I actually just ordered a set to make a similar video haha
@LilasTools10 ай бұрын
Great video, love me some stubby bits!
@vondutch66610 ай бұрын
Thank you for the run down on the different pry bars, went ahead and ordered a set. take care
@whatfreedom711 ай бұрын
I just use a ¢99 screwdriver that I bent the tip on. It’s a little longer than what I want but works just fine. I have used some of the micro tool truck pry bars but I honestly didn’t like them. They were too small in my opinion. These tektons. Might be just about right or maybe the Mathew’s.
@LupusAdNoctem11 ай бұрын
Literally half my tool wishlist in one video 😩
@oscarquezada89511 ай бұрын
I plan on getting me the Tekton
@meowmeow275911 ай бұрын
Doss it come with any storage?
@projectsandimplements11 ай бұрын
It does not. Just comes in a cardboard box with the 4 pry bars.
@fomocore11 ай бұрын
They do that because they make 12 inch long quarter inch Drive ratchets. You will bend and break the handles before the gear sets break
@Volksoner61911 ай бұрын
Wow. Those are huge. I’m gonna order a set because they look like they’ll serve a purpose but didn’t think they were that big.
@santastabber11 ай бұрын
That green matco is my favorite. I lost it, and bought another.
@MarzNet25611 ай бұрын
I have the Lisle set. They are great for disconnecting electrical connectors.
@Codyyster11 ай бұрын
Just noticed myself when I got a new ratchet repair kit. So odd, I don’t break any obvious or ratchets so I guess the easier repair is the anvil
@DownHillgamer11 ай бұрын
Wow, I love my snap ons but those look beeeefy
@donwendling780011 ай бұрын
How Much? $$
@johnnyolson25811 ай бұрын
Man this is the exact video I've been looking for where all these different mini pry bars are compared
@user-rf4wz3dr9u Жыл бұрын
how does it ship? is it package in tekton papir? is it sealed? wondering because i wonder if i got a used sett?
@projectsandimplements Жыл бұрын
I purchased directly from Tekton’s site and it came in a Tekton branded box. It ships with a little foam divider inside to keep them stable.
@Volksoner61911 ай бұрын
A lot of tekton stuff ships wrapped in black paper.
@ozzysgang7193 Жыл бұрын
How would you rank them?
@projectsandimplements Жыл бұрын
It’s hard to say because the Tekton set is in its own category. The size of the handle and overall pry bars is nice, but I don’t see myself carrying them in my pocket like the smaller versions. The Tektons are great to grab instead of a small screwdriver when you find your normal pocket pry bar won’t cut it.
@gavinfountain1182 Жыл бұрын
I think thay do that so the drive breaks instead of the flexible headed rachet handle as it would be more expensive to replace the whole handle as some people use the extra long 1/4 drive and put a 3/8drive kit in them which you can get a lot bigger sockets on them but not shaw if that's the reason
@chiparooo Жыл бұрын
Just got the Mayhew mini set. Definitely like the look of the Tektons. Thanks for sharing!
@liliarodriguez1584 Жыл бұрын
Congratulation
@ooXxDrUmMeRxXoo Жыл бұрын
Nice Koken. Id love to have one of those
@Dancing_Alone_wRentals Жыл бұрын
Woe! Go back! What was that ratchet with both the 3/8" and 1/4"? That was pretty cool. Great video!
@projectsandimplements Жыл бұрын
Thank you! It's a VIM HBR1046. I have a video planned to showcase bit ratchets in the near future.
@Dancing_Alone_wRentals Жыл бұрын
That should be good watching@@projectsandimplements