YESS THANK YOU FOR POSTING THIS I HAVE HAD ONE FOR ABOUT 5 MONTS AND DONT KNOW HOW TO INSTALL IT 🤦🏻♂️
@indecisivegarage238913 сағат бұрын
@@ROBBBIIINNN glad to help
@rayemanuel74603 күн бұрын
With only 155K on the odometer it seems like a bit early to need new struts. I own a 2012 with 172K on it and original struts are still fine.
@indecisivegarage23893 күн бұрын
They may have a bit more left in them. No leaks but the boots have all disintegrated.
@rayemanuel74603 күн бұрын
@indecisivegarage2389 my boots were toast a while back. Don't need to replace unless they're leaking oil.
@turnerdrywallrestoration807710 күн бұрын
The 20mm looks really nice. I’d like to get some of these for mine. I was wondering if there’s anything other than Loctite that could be used since those threads are so shiny and new.
@indecisivegarage238910 күн бұрын
@@turnerdrywallrestoration8077 the Perrin instructions mentioned oil but you have to toque to a lower value. I am thinking I will use loctite 290 after another round of torque. 290 is designed to wick in on already installed hardware
@turnerdrywallrestoration807710 күн бұрын
@@indecisivegarage2389 Oh nice yeah that’s a good idea. 👍
@dlau314016 күн бұрын
Sick!
@indecisivegarage238917 күн бұрын
To be fair I am a bit obsessive but it was a bit of a pain.
@dlau314017 күн бұрын
I was considering an AOS, but the install looks so complicating. Thanks for the video
@indecisivegarage238917 күн бұрын
Glad it was helpful!
@optoblog19 күн бұрын
My 2023 2SS came from the factory with a deleted sound tube! I drive around with the back seat back dropped down so I can hear it more.
@mixedbyedd22 күн бұрын
Any links to the cylinder you found on Amazon? Just wan to make sure I’m getting the right one
@indecisivegarage238922 күн бұрын
a.co/d/0fG6AC4v
@anthonyobrien956923 күн бұрын
Thank you for the detailed video's!! Did mine in 2hrs because of it!
@____HEISENBERG____Ай бұрын
I bought the same chair cylinder. I have a Teknion Contessa. After i installed the new oasis cylinder, it sinks right back down completely. Do I need to adjust the screw? There's no video of this particular chair on how to do that.
@indecisivegarage2389Ай бұрын
It sounds like the new cylinder is defective. I got about a year out of this one until it failed again
@whiteshadow67Ай бұрын
Would be handy if manufacturers would design easier ways for people to route after market cameras.
@indecisivegarage238927 күн бұрын
That’s for sure this process was a real pain.
@indecisivegarage2389Ай бұрын
Nope but I doubt it would hold up well. lol
@azpk85Ай бұрын
Kind of reminds me of a pickleball racquet, do you play?
@diegocarrasco6136Ай бұрын
Wait what!!? $45 bucks for that!!! Ah thank god i looked for a video, I can just 3D print these. Here i thought it added actual buttons with wiring and circuit and what not. 😂
@indecisivegarage238927 күн бұрын
It is a bit pricey but they are finished nice.
@ukaszkwasniak9684Ай бұрын
You will provide the files to replace in for scan so as not to change them manually
@indecisivegarage2389Ай бұрын
Sorry this is just for diy information. Also I do not have a Fiesta anymore.
@theredsalmon612Ай бұрын
i had this installed for a few weeks. it was fine but honestly didnt help much. 3rd gear is the issue for me. feels like shit
@youtubeshem7300Ай бұрын
How did you get the problem fixed ?
@indecisivegarage2389Ай бұрын
I believe I posted a video tracking it down to a loose heat shield on the exhaust. I bought some metal ties to replace a missing factory one.
@jedwin4816Ай бұрын
The cheapest I've seen one of these is around $150. I'm not sure it's worth that to me.
@indecisivegarage2389Ай бұрын
Made a big difference for me but just depends on the individual. One thing to note is the padding is thinner on the extended one
@Revann272 ай бұрын
Does it matter which way the white lever is placed? I’m confused with the module, the part that spins has a gap”missing gear” is that suppose to line up with how you place the part that spins?
@1979jerrod2 ай бұрын
how do you get the lugs off?
@Wannakatana21122 ай бұрын
I wonder about heat buildup? Does the speaker level turn on work properly but more importantly, does it turn OFF automatically as well?
@indecisivegarage23892 ай бұрын
I didn’t have any heat issues especially with a class d amp. The speaker level triggers shutdown well. They have a delay from when the last signal was received and shutdown.
@Wannakatana21122 ай бұрын
@@indecisivegarage2389 thank you so much.
@angelking77922 ай бұрын
I have a question, where did u got the remote cable from ?
@indecisivegarage23892 ай бұрын
Hello the line converter that I used had a remote triggered by the input signal. There are some amps that do this as well on their speaker level inputs.
@angelking77922 ай бұрын
@@indecisivegarage2389 appreciate it 🙏, I just wasn’t sure if that harness took the remote from the stock amp
@user-zh7hu8jb4k3 ай бұрын
very poor, no light and used a fram filter
@nigel-uno3 ай бұрын
Bought a kit that came with this tool but it didn't work out for me. Had to use the pipe wrench method and wd 40 but DOWNWARDS smashing the pipe wrench with a mallet to have the most force. The aeron classic I have is probably nearly 2 decades old and the gas cylinder was probably why the previous owner got rid of it for cheap.
@Kip45003 ай бұрын
Looks great. How have they held up? Thanks for the video
@timosness36673 ай бұрын
I got a 2019 5.0 6speed manual and does this as well. Very annoying!
@AlanCturk19923 ай бұрын
I have same issue on my brand new 2024 S650 GT... very disappointing to have a brand new car sound broken. Took it to Ford a couple times already and they say its the infamous typewriter tick issue which is normal for these cars.. what a bummer
@user-dd8tg3ou1s4 ай бұрын
Rsa
@kylegoodale70614 ай бұрын
Thank you for this video, I got a new evap harness order for my 2016 Fiesta with a single port silicone intake tube and installed them in a day. The hardest part was the front lower line that connects to the lower intake tube. The 2016 model fiesta st has a rubber hose that runs down there with a different connection, once you get that off it's easy. After 2 days or so of driving my check engine light is out! Thanks again for the video and to Whoosh motorsport
@Deathbecomesme34 ай бұрын
These came on my red 2012 SE in 16" when I bought it and I'm considering a set of the 17" with white accent for my black 2019 ST. They would pair really well with the white stiched alcantara interior work and off center white stripe I'm planning. Just an FYI for anyone finding this video years later these are INCREDIBLY easy to curb rash.
@arentas744 ай бұрын
This video was great. I was able to do mind following this video instruction. Thank you so much!!!!
@alexfrederick74114 ай бұрын
There is a TSB and chrysler/jeep will do this for free. They extended it until 2026.
@09dpac4 ай бұрын
a little bit late for the party lol . i can confirmed that it works for 2015 St3 with a 2018 titanum sync3 upgrade. i cant figured it out why my rear camera not turning on when reversing. i coppied exactly what you have on 7D0-01-02 and it worked ! thanks
@earlliotti53164 ай бұрын
Thank you!!! Garage happiness!
@Blue_S1975 ай бұрын
Interesting, i notice this same noise on my 3-1-1 build to..not even 50 miles on the new setup
@donphonso5 ай бұрын
Using the tool wrong, keep the bolt in loosely and apply the tool on top of the bolt to push off of the bolt head
@bradkauffman39255 ай бұрын
So how long did it take to replace the clock spring? Rough guess
@foxmulder76165 ай бұрын
Timing CHAIN ⛓️!?..... where tf is the chain?
@williamevans65223 ай бұрын
Passenger side of motor
@przemekostrowski58365 ай бұрын
Not much light 😂
@jontyus81435 ай бұрын
I could totally work on a vehicle with this dude.. flip Flops and all..😂
@joelphx26 ай бұрын
Thanks!
@jeremyburns21096 ай бұрын
How long was the entire process approximately. I still have to buy the clock spring but I don't have a backup vehicle. Maybe a Saturday afternoon
@indecisivegarage23896 ай бұрын
If all goes well you can do it easily in an afternoon
@bigohm3066 ай бұрын
I forgot all about the tag lights lol. About to go swap mine now
@BrandenSimmons6 ай бұрын
FML, I didn’t want to take that much apart for a freaking hose. Great instruction
@amichaels-v36 ай бұрын
Thanks for sharing. Can you provide the link to the cylinder you purchased?
@analogman14966 ай бұрын
Gave it a try as I wanted to install an Align Tactical gas pedal in place of the stock take down lever on a brand new P320 X-5 Legion. Worked perfectly and I applied a little TW 25 white gun grease to the new lever pin and everything was good. Thanks for this tip.
@bobsmith99387 ай бұрын
I found out it’s the older corolla versus the new ones, the newer tensioners don’t have that O-ring.
@cargo47417 ай бұрын
Solved my problem. Thanx
@cargo47417 ай бұрын
Wish you would post on this topic more often.
@joelbauer7583Ай бұрын
What if the slide is already on top? Can't get my selector to move in vertical position to remove.
@Jayrock2537 ай бұрын
I’m so glad I found this video as I’m about to be doing this same fix. I have a 2011 jku rubicon but I assume the process/part looks exactly the same
@allanhernandez69357 ай бұрын
Hey man please help, what kind of amp is that? Not the harness but the amp its self, my radio been weird plays music but cuts off every millisecond
@indecisivegarage23897 ай бұрын
I think it was a fosgate prime mono. Either 250. 1 or 500.1 it’s been awhile since I had that car.