as long as this has been around, it is still selling for over $200 USD. Usually costs are reduced over time. Where is the upgraded version?
@cordomdom4 ай бұрын
Super vidéo, facile à comprendre comment installer et l'utilité indéniable du produit.
@RyanRussell8855 ай бұрын
Thank you so much for this!
@ivanpopovic12666 ай бұрын
I have this, don't buy it. Somehow, washing my bike killed it when it was under seat. And because it's supposedly sealed, they can't repair it. Crazy expensive waste of money.
@Zukilover3056 ай бұрын
Example at 2:44 was EXCELLENT!!!
@motoviagens9 ай бұрын
Hi friend. Thanks for the video. I have 2 questions: 1) Where can I get one of this ground bus terminal block? what its called on store ? 2) How do I install a HORN and a LIGHT that needs a switch each on the PDM60 ? Thanks
@fredzuccarelli Жыл бұрын
Another great video!
@fredzuccarelli Жыл бұрын
Brilliant explanation Stéphane....even 8yrs later. I just discovered Amplink and will be using the latest and greatest version of this product on my new yamaha super tenere. I considered the new vstrom 1000 as well....but I love the shaft drive!!! How did your bike do over the years???? 🇨🇦🇨🇦🇨🇦🇨🇦
@LH1JR Жыл бұрын
Terrific video. It left no doubt in my mind about how this product functions and how easy it is to install and use. I’m ordering one for my 2022 GoldWing Tour today. Thanks again for the great video and information.🏍️😃🍷
@davrac20082 жыл бұрын
Excellent video, very well produced.
@propatriabellum2 жыл бұрын
Great video! Mercí!
@oliwally2 жыл бұрын
What an excellent instructional. Thank you! What is that Healtech device you have installed under the seat?
@bertrandp89172 жыл бұрын
Bonjour Stéphane, pourriez-vous m'indiquer qui vous a installé vos Denali. Mon concessionnaire ne veut pas le faire et je ne suis pas assez bon en électricité pour le faire moi même. Merci.
@RavCadoch2 жыл бұрын
Well done Stephane!!!
@dada32d852 жыл бұрын
Bonjour, deux questions : comment avez-vous fixé les D2 sous le bec de canard ? Les lumières étant fixes par rapport à La Fourche, ni-a-t-il pas un manque de luminosité dans les virage serrés ?
@juanescobar43242 жыл бұрын
Amazing video! So the negative block is connected to battery and not to the negative ground bus terminal from the kit? Do you then just remove the negative gournd bus terminal from the battery and just not use it at all?
@bilmuhalper2 жыл бұрын
Thank you so much Mr. Lafrance 👍👋
@DavidD8672 жыл бұрын
C est hors de prix !!!!!!!
@hussienabukhalil20122 жыл бұрын
Thanks 😊 man for this professionals work.
@MrStoney19612 жыл бұрын
Knowing nothing about auto ekectrics, I'm now going to be able to add accessorie myself, Thank you so very much.
@chrisberardi23043 жыл бұрын
Is it still available? I found a Rowe web site but it seems abandoned.
@johnanderson97353 жыл бұрын
Thank you for your installation video. I have a new V-Strom and I plan to get it wired the correct way, your instructions are very helpful.
@podko13 жыл бұрын
Would you be able to provide details on the wiring please? Also as asked in other comments, how do you flash the lights? Just std button?
@1jroon3 жыл бұрын
Very well done! That is a very cool product!!! Thank you for sharing.
@0ParisFrance3 жыл бұрын
Faire un tuto sur les phares en pleine journée il fallait y penser !!!!
@michaelhoare52913 жыл бұрын
Probably the video I've seen on the PDM60. I've decide not to hard wire the unit to the bike but instead introduce a 9 pin block connector which will allow me to unplug and remove the unit should ever want to change or redistribute any devices and reprogram the unit.
@vinylempire3 жыл бұрын
Fantastic video! Thank you for your thoughtful approach.
@CoursNatationcom3 жыл бұрын
Bonjour, Superbe vidéo , si j’ai bien compris tous les fusibles des accessoires sont supprimés mais où est branché le négatif des accessoires ou est ce que c’est géré directement par le boîtier PDM60. Que pensez vous du nouveau produit Amplink qui a l’avantage de pouvoir être géré en Bluetooth Merci
@ShujaKidwaiMasauliwala3 жыл бұрын
Very good instructions. Thanks got sharing.
@kevinferah87393 жыл бұрын
Thank you sir! Amazing video. C’est super de voir des amis québécois!
@Tim.Traveler3 жыл бұрын
EXCELLENT Video!
@Akibatai003 жыл бұрын
Should show how bright they are at night
@mandar50053 жыл бұрын
Superrrrbbb...
@Movieman19653 жыл бұрын
I believe that the PDM60 SHOULD include the Negative Ground terminal block as part of the kit, Because, really, who wants to make a rats nest of wires connecting to that negative lead they include in the kit! Other than that it appears to be a great power kits for motorcycles. Expensive but compact and useful. Excellent installation and set up instructions video!
@mandar50053 жыл бұрын
Hi, amazing video. Can you please share the link for the negative terminal block.
@simyam21233 жыл бұрын
Hi I just wondered if he came back to you with an answer to this question Simon
@mandar50053 жыл бұрын
@@simyam2123 I got it through aliexpress.
@sameermulla59504 жыл бұрын
Excellent job thank you
@michaelbarryprojects4 жыл бұрын
Incredibly detailed and excellent step-by-step instructions. Clear video too! Thank you for the instructions! I'm in Louisville, KY and just bought a 2010 Honda ST1300. I was looking for a clear method for managing additional accessories and this video is perfect.
@mikemaners44114 жыл бұрын
Merci, tu m’as vendu!
@bandolin12164 жыл бұрын
I know this was posted 5 years ago so I don't know if you are still around Stephane but there is something I don't quite understand. You have connected your accessories directly into the PDM 60 so that when you turn on your bike the accessories will also turn on after the delay. But what if you want to control them through a button? I don't want my driving lights on all the time. I only want them as extra lighting at night on dark roads. The typical push button switch has 3 to 4 wires (ground, positive, common & open circuit). Obviously the ground will connect to the ground on the PDM60. But how do you distribute the other 3 wires from the switch to the single circuit wire coming from the PDM?
@kkhalifah10194 жыл бұрын
Nice!
@norbertlequeau56414 жыл бұрын
Bonjour Stéphane, j'ai remarqué sur ta vidéo que tes feux clignotaient par moment. Est-ce prévu d'origine ou as tu ajouté quelque chose sur le circuit et si oui, peux tu me dire ce que tu as ajouté ? Merci
@rogerboyard59554 жыл бұрын
Vidéo intéressante qui m’a permis de me décider à équiper ma BMW R1200 GS de feux D4 qui me permettent d’évoluer avec un éclairage plus que correct la nuit sur des portions de route dépourvus de tout éclairage et accidentogène ! Merci pour ce partage.
@oldgreenbus4 жыл бұрын
Fantastic video Stephane! Thank You for such a pro level production.. I wish my French was as good as your English. Bravo!
@dansam92494 жыл бұрын
Great video. Thanks for Your detailed instructions.
@PennsylvaniaDualSport4 жыл бұрын
Thank you for helping this electrical dummy lol. Great instructions !
@cwqrpportable4 жыл бұрын
Thanks so much Stephane for providing such a clear and precise instructional video.
@av8dr4 жыл бұрын
Great instructional video. Thanks.
@precompetition5 жыл бұрын
Hello Steph, thanks for the video. Quick question, with the D4 what’s the need for the D2? Also when you fix them (D4 and D2) are they all straight or some have angle to create a better coverage? Thanks
@mrlancekink5 жыл бұрын
Great video. Thank you. I agree with the earlier comments that you should do more instructional videos because you're a great producer.