Very good video where did you purchase the kit and how much thanks
@MrLyons91Күн бұрын
Doing great, keep the videos coming!
@ClassALivingКүн бұрын
Thx! Yup working on the next one stay tuned :)
@TroyRank2 күн бұрын
I'm dreaming about this being painted only with clear coat 😊
@ClassALiving2 күн бұрын
Lol I would love that too but I don't want it to stand out any more than it already will, I feel like if I leave it lookin like a Mad Max vehicle I'm going to get pulled over everywhere I go and get stalked in the parking lots.. But it would save me a lot of time on prep🤔
@greglalonde71793 күн бұрын
Save time and sand blast it
@The_Southland_Piper3 күн бұрын
Rust converter
@Cutlass_Rudd3 күн бұрын
nothing is converting that, has to all be ground off. Would have been 100X easier to have just fogged the thing in primer once the body was on it
@jasonfonoti23513 күн бұрын
Always here to support you bro👍
@willarddenton43603 күн бұрын
Are you going to use acid eitch primer
@ClassALiving2 күн бұрын
@willarddenton4360 Depends if it costs more, sounds like a good idea though 👍
@thegrumchronicles35583 күн бұрын
Look in to por-15 , it is a rust converter. You just scuff off loose rust and brush it on and it turns rust in to black primer. Trust me when I say it is a permanent solution and after a quick scuff you can paint right over it.
@ClassALiving3 күн бұрын
I might use that for the under carriage but I've read somewhere it degrades in sunlight so idk
@gtcivic33 күн бұрын
@@ClassALivingI used it on two metal poles that go through my roof for the power wires. After about 8 years it’s still holding up great.
@sjackson993 күн бұрын
Have you considered a rust converter? They can be used as a base coat. That way you don't have to remove all the rust.
@ClassALiving3 күн бұрын
Ya I might use that too, I'm planning to go to a proper paint store and see what they have and what the price differences are.
@Ayijuse3 күн бұрын
Have you considered a raptor liner or something equivalent for the body? Something a bit more durable, and lasting. Paint is great and all, but the liner might be a cool look for the overall design that you’re going with on patches.
@BKAD623-hz7ln3 күн бұрын
$80 bucks for six tubes. Expensive! But gotta do it right ✌️
@69uremum3 күн бұрын
use phosphoric acid on the surface rust, home depot sells it in the paint area as metal prep/concrete etch.
@billgaldemis1493 күн бұрын
Thanks!
@ClassALiving3 күн бұрын
Holy Moly, Thanks so much for the massive support buddy ❤❤❤☺
@robertmcdonald92803 күн бұрын
Try a 2. Gal.pump sprayer with liquid rust remover.
@Tim_Kent3 күн бұрын
Awesome new tool. For the roof, maybe you could try chemicals to remove some rust. 🤔
@lindanadaud96983 күн бұрын
Thanks for the video.
@user-lb4lq8cj8e3 күн бұрын
Awesome video can't stand that Rust
@viewer-v-213 күн бұрын
Hello dude!
@hoss22296 күн бұрын
Hey there is a youtube channel called landmodo he shows land for sale most time in Arizona little money down. owner financing. Most of them are like $100 down. But its just land
@ScottTaylor-n6f7 күн бұрын
Since I’ve seen patches rebuild I’ve been curious what you had in mind for all the space behind your living space. Nice job getting rid of a ton of tail swing! Admittedly I only seen a few of the Patches rebuild. I still need to watch probably the first 24 or so videos of patches rebuild. Personally I’d hate someone knowing more about me than I know about them. With that in mind, sorry if I bothered you at the red light today. The story I wanted to share with you is a small world story. A few months ago my father sent me a link to a KZfaq video of a guy that he’s been following for around 4 years. He said out of all the people he’s following this guy is the only one he’s sent $. He also said this guy lives on on some property in the country somewhere close to I5. That’s not exactly what what he said but because this is public I’m just saying what he said led me to believe you resided about an hour away from where I live. So, I’m watching this video he sent me and I’m thinking this guy lives in an area that is really similar to my area. It wasn’t until quite far in that video until I realized that you seriously live close to my town. All that isn’t really important to the story that I wanted to share with you. The small world part of the story is that my father not only enjoys your videos and is impressed with you skills but the fact that for the last 4 years he’s been enjoying your videos from the northern coast of Brazil! I just wanted you to know that you’re reaching people from quite a distance. Personally, I couldn’t believe he’s been watching you for years and you’re probably just 20-25 minutes away from me.
@kennethevoy7 күн бұрын
Switching to stick to avoid running into town for gas?
@ClassALiving7 күн бұрын
Yup, trying to save on gas and get some practice with stick welding
@joshporter62027 күн бұрын
I say build a wood deck bed like you see in the old trucks. Out back you can use as truck bed when you need to haul something or use as a porch! Keep it up Nate you getting there.
@mk96lx7 күн бұрын
Have you considered putting down some 2x6 or 2x8 planks like you would find on the deck of a trailer instead of plywood?
@ClassALiving7 күн бұрын
Ya but I think that's going to be a lot more expensive, just getting this RV put back together as fast and as cheap as possible and on the road, I plan on making a bunch of modifications once I get to the home base.
@MoParRus3407 күн бұрын
Might should have put those hose clamps on facing down so in the future if you need to take one off you can get to the hex head with a nut driver rather than having to somehow reach over them from underneath the RV.
@ClassALiving7 күн бұрын
Ah yes good idea
@UOttawaScotty7 күн бұрын
Amazing work Nate, It must feel good to be at the point where your putting everything back together, keep going ;)
@ClassALiving7 күн бұрын
Thanks man. Yea it sure does, finally! :)
@diggingarizona85927 күн бұрын
Nate your gonna have to change patches name. I was thinking Max.......Mad Max 1 👍
@VanlifeHQ7 күн бұрын
Mooooooooooor that 40 minutes went like 10 😂 brilliant could watch a 2 hour video no worries
@JonathanVee7 күн бұрын
Thinking your air intake line might be a little restrictive? Kinda looks like it will be inhaling through a straw. The install is nice tho 👌
@NotMeeither7 күн бұрын
Patches is looking good ! It wont be long till You get to drive it again . If You use OSB or practical board it wont hold up to wet weather very good. If I was doing it I would use 1/2 or 3/4 inch marine plywood , it is a little expensive but with a good coat of paint it will last many years and with 3/4 inch You wont have to put in much bracing under it. As hillbillyrver357 said If You come to Quartzsite for the winter camping season You will be able to get tons of work ! If You come be sure to look Me up!
@slew28277 күн бұрын
Now this is what I like to see good progress I was hoping you would shorten the frame
@mordeth1417 күн бұрын
Nice!! Its really starting to look good. I can visualize the back porch!!
@propperdad7 күн бұрын
box the frame back there
@SandyG3TX7 күн бұрын
Are you going to have built in external port tire/air inflator on the back by the tank? Be nice for tires or tools.
@doingitwithnothing7 күн бұрын
Progress Nat Progress ❤❤
@zaneanderson91087 күн бұрын
Great work
@healthone31207 күн бұрын
Looks great Nate!!
@PulledPorkGarage7 күн бұрын
Really magnificent...
@richardmiller52387 күн бұрын
Looking good Nate!
@gillypoof7 күн бұрын
I can,t wait to see it go go go
@theteagues67927 күн бұрын
Regarding the deck, what about screwing down 1 1/4" pressure treated decking crosswise without a subframe to get you on the road. You could use the steel to construct short walls like a landscaper's trailer.. could even hinge the sides & a tailgate.. Just a thought.. You're almost there.. good job! Dennis WB8DT
@rclong24497 күн бұрын
Nice work, you should use bulkhead fittings to prevent your blue fittings and hose getting chewed up going down the road. Iam a retired diesel mechanic and trailer mechanic did many of these over 45 yrs