TOOL CENTRAL GARAGE

Пікірлер

@W210Garage 13 күн бұрын

Gedore 1B or 7XL 😉😀

@mattn563 19 күн бұрын

What is the price?!?

@peterstone5356 19 күн бұрын

A quick google has their website saying $18,226.12. Not for me.

@mattn563 18 күн бұрын

@@peterstone5356 tried searching as well but couldn't find in US at least, figured it would be crazy

@miketuggle9273 22 күн бұрын

I don't believe you about these are the best tools. Prove it and send me one of each please for my own evaluation. I also don't like Porsches so, if you want to change my mind send one for evaluation too please, preferably a turbo S or a GT2 RS. LOL.

@TOOLCENTRALGARAGE 20 күн бұрын

Ok Mate, Its in the Mail!!!

@user-rw7ei3jr2c 25 күн бұрын

Круто!!!

@TOOLCENTRALGARAGE Ай бұрын

Wera Spanner Set available at mektronics.com.au/products/wera-6003-joker-11-pce-spanner-set-metric-020231

@TOOLCENTRALGARAGE Ай бұрын

hazet spanners available at mektronics.com.au/products/hazet-17-pce-12-point-metric-combination-wrench-set-600n-17n

@TOOLCENTRALGARAGE Ай бұрын

Follow facebook.com/JakeDonaldsonRacing

@polfigurski6900 Ай бұрын

Of course, what no one tells you, is that out of all those bits, you'll only ever use three, and the rest is a waste of money, because: 1. You already have those from three different sets you got, and 2. You never, ever, use them.

@peterandersen1380 Ай бұрын

Wera is ok , but i never realy got the feeling for them , allways grap one of the other ones.... but must say had them for 10+ years they are still around The Old Bacho , the one with the green handle is somting I miss

@D.Schoenmakers 2 ай бұрын

Great short video, but an important note: Wera is not a Czech manufacturer, but a German manufacturer! Greetings from Germany!

@123kdljfdl7 2 ай бұрын

Wir wissen das Wera ist Deutsch firma. But majority of these great tools are made in Czech or in Poland :)

@wh0tube 3 ай бұрын

If I Wera carpenter I’d say it has better bits, or Hazet really?

@hoss3245 3 ай бұрын

Hallo, ich mag Hazet!

@andrewlucas3049 3 ай бұрын

I bet I smells so good in there

@yt66228 3 ай бұрын

Good video. YOU PRONOUNCE THE K in knipex

@greenmarine5 3 ай бұрын

What is the best tool bit set?? neither one was put to the test

@TOOLCENTRALGARAGE 3 ай бұрын

Hi Mate, I own the Wera and rate it highly. I think in this review I go with the Hazet.

@esse-kx4io 4 ай бұрын

The old wera tool check plus had a slide button to release the bit selection . I guess wera is cutting costs or maybe they had issues with the button design. The case also isn't the sturdiest. My case broke and I had to glue it back but the tool kit is excellent.

@TOOLCENTRALGARAGE 4 ай бұрын

Hi Mate, Yes you are correct, one of the reasons is many people didn't know that the logo was a slide button and they were forcing it open.

@TheCherokeeKidd 4 ай бұрын

Ten bucks says I break the end of the wera way before I do any damage to the knipex. I don’t own wera tools because they look like cheap gimmick tools I can break. They’re perfect for house tools but not trade.

@branbosage2330 4 ай бұрын

Some of their tools are very good professional quality. But with the jokers specifically I think I saw a Project Farm do a test on them and they were one of the weakest of spanner heads in the competition. It’s a trade-off for the mechanism.

@TOOLCENTRALGARAGE 4 ай бұрын

Interesting, I sell to professional mechanics every day of the week in the Mobile Tool truck and they all seem to love and rate the Wera highly.

@TheCherokeeKidd 4 ай бұрын

@@TOOLCENTRALGARAGE, interesting indeed. Seems like all the positive reviews come from people selling their tools or getting paid to promote Wera on their tool channels.

@TOOLCENTRALGARAGE 4 ай бұрын

@@TheCherokeeKidd , Did you ever think the reason I sell brands like Wera & Knipex are because they are quality tools!

@TheCherokeeKidd 4 ай бұрын

@@TOOLCENTRALGARAGE, I’m glad that you stand behind the products you sell and I’m sure Wera’s tools are good quality, but im personally not sold on the Joker wrenches. PipeVise has The micro 5 and The Amigo and the cost of this two tools is about 150 USD. Cost less than a set of Wera jokers wrenches and takes up less space with a lifetime warranty. You should check them out.

@scottaddison8071 4 ай бұрын

Wera is great, but PB Swiss is greater

@leithmurray736 4 ай бұрын

Your comments regards the Knipex not being ratcheting is totally incorrect, they do the same as the Wera.

@TOOLCENTRALGARAGE 4 ай бұрын

Thanks for your comment, I wouldn't say its totally incorrect as the Wera can lock on with its jaw and the Knipex can't, however I will concede that with a little practice you can use a ratcheting motion.

@1lupus 4 ай бұрын

Once you get used to the Knipex Pliers/Wrench, it is easy to use it like a ratchet. Just choose the right setting, when you apply pressure and turn the nut or bolt, let up on the pressure and ratchet back and the jaws open up and move to the position to get the next turn.

@TOOLCENTRALGARAGE 4 ай бұрын

Interesting I hadn't found that when i tried it initially, but I see it can be used in a similar way. However it doesn't lock in like the Wera with its cut out in the jaw. Thanks for commenting.

@1310mini1 4 ай бұрын

Wow!! what a great price, i beeter get one soon 👍👍

@hackusprime 4 ай бұрын

Thanx for the vid!

@TOOLCENTRALGARAGE 4 ай бұрын

Thanks Mate, appreciate the comment.

@Sainte305 4 ай бұрын

Neither for me. I tried Knipex, but the teeth kept sheering off on big jobs. For small plumbing stuff, I am sure they are fine, but not for real work. Wera is just overpriced for the quality.

@JAYY_JAYY 4 ай бұрын

What do you recommend then ?

@varpos 4 ай бұрын

I've got the big knipex ones that he does not have there with jaws that have a T shape when cut in half. If you manage to break those, I do not know what you are doing tbh... else I suggest you give those a try as they are awesome 😊

@TOOLCENTRALGARAGE 4 ай бұрын

All review stock available at mektronics.com.au/search?q=wera%20self

@mrlautomotive712 4 ай бұрын

Hmm, the 8mm hex is overkill for the 1/4” small ratchet. The Wera sockets have deeper groves, the set is more compact, so it’s a winner in my business.

@Jtx_Tools 5 ай бұрын

Idk how I feel about Pb Swiss they Have that Nice tip design on the Flat head/ Slotted Screwdrivers. for everything else the handle design and Construction of the screwdriver seems run of the mill Idk how I could justify spending almost 3 times the cost of the competition for a set, for these…

@CrookedSkew 5 ай бұрын

Thanks for the video. I've found the PB Swiss screwdrivers and bits to be superior for gripping screws when compared with the Wera screwdrivers and bits. What I mean by that is that I can put a screw on the end of the screwdriver or bit (tip pointing up) and the PB Swiss will hold it if I turn it upside down whereas the Wera usually drops the screw. This may not happen with all Wera but it does with some of mine. I have some firsthand experience with the above. My only constructive comment on the PB Swiss is that they don't do a heavy duty version of Pozi-drive with the through handle blade and hexagonal bolster. Just a friendly heads-up that you need to fix your camera or lens as the video is washed out which is very distracting making it hard to watch.

@narutobroken 5 ай бұрын

Wera is uncomfortable for my hand

@olvera6710 7 күн бұрын

You might be holding it wrong.

@narutobroken 7 күн бұрын

@@olvera6710 Steve Jobs everyone

@JB-mw5rg 5 ай бұрын

PB for me, great screwdrivers, been using them since the 83 or so.

@1pcfred 5 ай бұрын

For me the Wera is out because of the overmolding. Sometimes I get pretty grimy, messy and sloppy working. So I need tools I can wipe down. Not ones that are going to trap dirt and fluids. I never understood any of those soft grip tools. That crap would look like the dog's breakfast if I used them.

@rickoneill4343 5 ай бұрын

Great content man. Few tips. Use a tripod or reduce Camara frame rate down below 30fps. Reduce your into to only a few seconds. Check out how to colour calibrate your video grading. Hope these help and love to see your channel grow!

@Jeff-rk8hq 5 ай бұрын

These are genuinely good tips imo and with the thorough comparison he could have much success

@TOOLCENTRALGARAGE 4 ай бұрын

Thanks for the tip

@Fred_the_Head 5 ай бұрын

I prefer my PB Swiss screwdrivers and nut drivers to any other brand.

@1pcfred 5 ай бұрын

PB drives me nuts?

@harveysmith100 5 ай бұрын

Wiha screwdrivers are my go too but the few PB Swiss tools I own are on another level in terms of quality

@brendangriffin1791 5 ай бұрын

I have bought several wera tools some are good some not so much . I have tried more than once to get a hold of wera so they could make good with the bad ones & have not heard from them .

@1pcfred 5 ай бұрын

So, you're saying they were no Wera to be found?

@brendangriffin1791 5 ай бұрын

@@1pcfred what I'm saying they wera no wera to he found

@1pcfred 5 ай бұрын

@@brendangriffin1791 customer service is what separates the best from the rest. We all hope we never need it but when you need it then you really need it.

@scottshaw1310 5 ай бұрын

It seems that somebody has placed a huge markup on the Hazet kit down there! In the UK, the Wera price is similar. Hazet would be 150AUD when converted. As good as both of these kits are, bit locking handles (from the same manufacturers) are inexpensive with much improved functionality.

@wytze01 5 ай бұрын

Wera also has a 8mm hex it's in the top left. Also on the wera bitholder you can just push the bit straight in you don't have to pull the holder up.

@ks-hg5vo 5 ай бұрын

Never found my wera that comfortable. The rubber inserts deteriate after some time. I reach for pb swiss girst but only have a few as cost. The felo ergonomic are excellent but the markings on the handle top wear off. Irazola have parrellel tips also . Truely they best design for slotted screws. If my wallet was big enuff it would be pb every time.

@Ste2023 5 ай бұрын

Can you get Pb swiss in UK .. any links ...

@ks-hg5vo 5 ай бұрын

With difficulty. Only quality tools was superb but has now closed down. Hoffman group has massive choice. Bit cheaper than eBay etc if buying a few as postage is high.

@harveysmith100 5 ай бұрын

@@ks-hg5vo This sounds daft but the cheapest way I have found is Amazon jp. Japan. They are competitively priced in Japan.

@brucesatow 5 ай бұрын

Very nice comparison. I prefer the Hazet and Wiha brands because it tends to be more precise and compatible with Japanese bits. Also, although it wasn't included in the review; the Wiha bits and bit holders are excellent - E.g. their Centrofix line of bit holders. I would rank them above the Wera as well. I believe what makes Wera unique is their creativeness in their product line. For example, I like the Wera ratcheting handle #826T and the Wiha 1/4 inch to 4 mm adapter to use precision bits; together. That way I can use the ratcheting feature with my iFixit bits. I suppose it all has to do with what you are working on. I tend to work on electronics and computers, so my opinions for tool use is highly affected by that. However, I have also done construction and machining, so the tools I use for that tend to be more heavy duty construction and reliability.

@nicovandyk3856 5 ай бұрын

Thanks for the videos, definitely going to come and have a look, all my favourite brands!

@slayerment 5 ай бұрын

Both great! PB Swiss my fav 👍

@BruceAllgire 5 ай бұрын

I like them both.

@peterryan7340 5 ай бұрын

Any Knipex pliers or screwdrivers to review?

@TOOLCENTRALGARAGE 5 ай бұрын

yes Mate, I will be talking about Knipex in the next few weeks!

@TOOLCENTRALGARAGE 5 ай бұрын

VISIT OUR ONLINE STORE mektronics.com.au/

@TOOLCENTRALGARAGE 5 ай бұрын

VISIT OUR ONLINE STORE mektronics.com.au/

@TOOLCENTRALGARAGE 5 ай бұрын

VISIT OUR ONLINE STORE mektronics.com.au/

@TOOLCENTRALGARAGE 5 ай бұрын

VISIT OUR ONLINE STORE mektronics.com.au/

@TOOLCENTRALGARAGE 5 ай бұрын

PB SWISS SCREWDRIVERS mektronics.com.au/search?q=pb%20swiss%20screwdrivers WERA SCREWDRIVERS mektronics.com.au/search?q=WERA%20SCREW

@Ffoo_ffighter 5 ай бұрын

Wera set meteic is $66 us. Hazet is 2x the price. Wera set has gone diwn in quality

@kaasmeester5903 5 ай бұрын

Not sure what happened to them. I worked a few times with a Wera ratchet set (not this one) and it was a joy. I looked to buy the set for myself but the price was unbelievable. They have come down in price, but according to some people, the quality has as well. I went with a set from Gedore (their budget Red line), haven’t been disappointed yet.

@-pschar4290 5 ай бұрын

Wera multi screwdriver is cheap garbage. Really disappointed with my first purchase from them

@SuperMIKevin 3 ай бұрын

Lots of people have been complaining about wera quality, it's very disappointing to see.

@TOOLCENTRALGARAGE 5 ай бұрын

Link for the tools reviewed below or Visit Mektronics Australia. Hazet Smart Holder mektronics.com.au/products/hazet-2300sh-1-smartholder-tool-holder Wera Tool Check Plus mektronics.com.au/products/wera-tool-check-plus-bits-assortment-with-ratchet-sockets

Ең жақсы KZfaq

Пікірлер