Fredrik Hamrebjörk

Пікірлер

@9458biglb Ай бұрын

Hello. I have printed your tally counter 5.0 a few times now and I love it. My wife uses it for counting bunnies in our neighborhood during our evening walks. My problem is out of 3 prints, one worked, the center peg that goes in the spring hole keeps getting pushed off the build plate and I can't assemble them without it...and I'd rather not keep trying the same thing expecting different results ya know. I have slowed down the rate as slow as possible but it doesn't seem to matter. Is there a way to print just that part?

@fredrikhamrebjork8930 29 күн бұрын

Hi, I'm not sure which component you mean, do you have a file name for it? Do you mean the small pin that engages with the ratchet gear (around 0:17 in the video)? /Fredrik

@9458biglb 29 күн бұрын

@@fredrikhamrebjork8930 Yes. The part that goes inside the center spring hole after the spring itself and rides on the gear. It’s kinda shaped like a long diamond. I got the file right off the Bambu Labs Bambu Handy app.

@fredrikhamrebjork8930 28 күн бұрын

Print it alone with a brim :) /Fredrik

@evamotto9276 Ай бұрын

Finally got mine built! Took a lot of effort, and a few reprints, but at the end of the day it works incredibly. I'm using it to count a modifier in Pokemon TCG.

@fredrikhamrebjork8930 Ай бұрын

It's origin is actually a life counter for MTG ;)

@dawoudread1405 Ай бұрын

is there a way to build a quick reset mechanic into this?

@fredrikhamrebjork8930 Ай бұрын

It's a work in progress... No easy way to easily implement this in the current mechanism. I am however working on a 3-digit version that will need a reset button.

@caleborava 3 ай бұрын

this looks crazy good! im going to make a modified version for stitch counting for crocheting :)

@GrimGearheart 4 ай бұрын

So when you're printing this, you do two filament swaps, one for the back and one for front? At least for the buttons, not for the body I understand.

@fredrikhamrebjork8930 4 ай бұрын

Exactly.

@GrimGearheart 4 ай бұрын

@@fredrikhamrebjork8930 Awesome, thank you ^_^ It's coming out beautifully.

@fredrikhamrebjork8930 4 ай бұрын

Wonderful, let me know if you run into any issues! :)@@GrimGearheart

@sealdoggy8785 7 ай бұрын

might be possible to simplify the design by instead adding a one way channel and follower for the + and - buttons, hitting the gear. would not need small parts or the rubber band anymore! itd be like like more recent designs for push-push actuated spring doors etc. this is a wonderful design!

@The_BrickYT 7 ай бұрын

Hi! I just wanted to say that this thing is incredible! Im still building it and I encountered alot of problems, im fixing them one by one until it's done. Nice build!

@fredrikhamrebjork8930 7 ай бұрын

Hi! Thanks for the kind words and glad you like it. Let me know if I can help you with something! :)

@The_BrickYT 7 ай бұрын

@@fredrikhamrebjork8930 I finally finsihed it! I only have 2 problems but I don't really want to fix them: 1: the support for the spring of the the minus button always break 2: The screw keeps breaking in half

@fredrikhamrebjork8930 7 ай бұрын

@@The_BrickYTThose are actually some pretty common problems. The support breaking is actually pretty strange. I believe it could be that you use a too long/strong spring which puts too much pressure on the tab, but I haven't encountered it myself so I don't know if that's the case. The springs should be just long enough to not rattle around, and not in too much tension. The screw breaking is due to tolerances making it fuse to the back cover on some printers. I belive someone did a remix to solve this issue on printables, so I'd looke there :) /Fredrik

@user-kw3yn4vf2b 10 ай бұрын

Hello can you put the latest version (2.0) online please because I printed the parts and I need them to build, GOODBYE

@fredrikhamrebjork8930 10 ай бұрын

Hi! I'm not sure I follow. What model are you referring to?

@user-kw3yn4vf2b 10 ай бұрын

@@fredrikhamrebjork8930 Hello, this is your meter model 2.0

@user-kw3yn4vf2b 10 ай бұрын

@@fredrikhamrebjork8930 Hello, this is your meter model 2.0

@user-kw3yn4vf2b 10 ай бұрын

Hello can you put the latest version (2.0) online please because I printed the parts and I need them to build, GOODBYE

@reinaldtan2361 Жыл бұрын

hey fredrik! what should i do if the plus and minus clickers dont have enough force to spin the dial? do i use a shorter rubber band to increase tension? or a shorter spring in the middle?

@fredrikhamrebjork8930 10 ай бұрын

Probably a bit late to this one, but it might help someone else in the future... A too long middle spring is likely the cluprit as that will make the pin press too hard on the gear preventing it from moving and allowing the button arms to slip on the gear instead of moving it. In other words, shorten the middle spring to decrease the tension on the pin. A shorter rubber band won't help. If it's too short the arms won't deflect when you release the button, resulting in the arms spinning the gear backwards on it's way back :P

@mantaspetrauskas2201 Жыл бұрын

Hi this is an amazing design can you make 3 digit counter

@fredrikhamrebjork8930 Жыл бұрын

I have one on the way. The mechanism becomes far more complicated though, so it might take a while :)

@mantaspetrauskas2201 Жыл бұрын

@@fredrikhamrebjork8930 then I will wait

@reinaldtan2361 Жыл бұрын

curious to know your price if you were to sell this. very interested to use this as a magic the gathering life counter (though i wish the number display were bigger)

@fredrikhamrebjork8930 Жыл бұрын

Unfortunately, I don't sell prints of these atm. However, the files are free to download. If you don't own a 3D-printer, I'm fine with someone else printing it for you as long as it's not being sold commercially :)

@reinaldtan2361 Жыл бұрын

@@fredrikhamrebjork8930 @Fredrik Hamrebjörk i just got someone to print these for me :) Just curious if it would be possible for you to make the numbers displayed bigger and such that it wouldn't require the device being picked up from the table to use. So something like the 'MTG commander anthrology life counter' except there would be clickable buttons / spinnable handles at the side. Edit: man my comment has been deleted 3 times, think i cant post links or something..

@fredrikhamrebjork8930 Жыл бұрын

@@reinaldtan2361 Ideally the dials would be far bigger, but if I made them bigger the entire counter would need to be bigger as well due to the geometry. Adding buttons to that kind of counter is possible, but it's a complete re-design, and wouldn't really benefit the functionality, if anything it would make it harder to use with one hand. I am working on a version 6 with added functionality (3 digits and a reset button), but it just in the early concept phase atm. :)

@reinaldtan2361 Жыл бұрын

@@fredrikhamrebjork8930 glad to know its possible. Ah, yes it would be a complete re-design but this is just a product i would be very interested in and have no idea where to go to get it produced. I've been searching for a mechanical tally counter (that can add AND subtract) and yours is the only one that does it! for version 6, would we be able to choose the number it resets to?

@fredrikhamrebjork8930 Жыл бұрын

@@reinaldtan2361 yeah, it takes a lot of development time and prototyping to design these, especially when the design changes are big. Resetting to a specific number might be possible, but that is if I get the reset mechanism to work to begin with :P

@mynt4033 Жыл бұрын

This is a really cool animation. How long did it take you to make it in blender? Or rather how many hours of learning blender did it take you before you could know what to do to make something like this?

@fredrikhamrebjork8930 Жыл бұрын

That's a good question, but at the same time impossible to answer. For me, it took about 4 days to put this together, but I have prior experience in similar fields/softwares.

@Pchampful Жыл бұрын

This looks awesome! Was it made with Blender? :) Best Greetings

@fredrikhamrebjork8930 Жыл бұрын

Thanks! The animation is made in Blender, but the model is made in Fusion360.

@Pchampful Жыл бұрын

@@fredrikhamrebjork8930 Awesome work and thanks for your response, have a great day!

@yahligilboa7489 Жыл бұрын

hi. im curently printing the model, and i wanted to let you knpow that: first of all, super cool! secondly, the prints listed in the webside (gcodes, not models) are with rafts... and you specifically said not to print with rafts. i have printed the model from the gcode and the raft was problematic so i took the models and sliced them myself :) just wanted to let you know in case you havent noticed

@fredrikhamrebjork8930 Жыл бұрын

Hi! Thanks! Fun to hear! The gcodes have brims, rafts are when you have a piece of plastic underneath as well. I don't use rafts because it messes with the first layer, brims however are easy to clean with a knife. To remove the brims in the gcode is on my to do list, but I added brim as that was the way I printed them. But yes, it's overkill to have brims. /Fredrik

@fredrikhamrebjork8930 Жыл бұрын

@UCwtm_f_1lH27MnV0RzWYvVQ That's very strange. I don't think I've used raft in like 5 years :O Awell, maybe it's time to take a look at the gcode. Great that it worked out in the end though. Make sure to post a make so I can see the end result ;)

@yahligilboa7489 Жыл бұрын

@@fredrikhamrebjork8930 well you are probably right In hindsight there were little gaps in the front case indicating it was indeed a brim and not a raft. But when i sliced it with a brim on prusa slicer it was only on the perimiter and barley noticble. Heck, im not even sure if i used a brim and it worked out perfectly. What are the future plans for the model by the way?

@yahligilboa7489 Жыл бұрын

@@fredrikhamrebjork8930 ahhh lol. I gave it as a gift to a friend but ill ask her to take a video of it functioning. Made it in a total rush to surprise her🤣

@fredrikhamrebjork8930 Жыл бұрын

@@yahligilboa7489 I'm actually working on a version 6 that will be able to have 3 digits(or more?) instead of 2 and a reset button. Haven't fully figured out the reset mechanism yet, so it will likely take a while :)

@sayasukakopi Жыл бұрын

can you make tally counter 4 or 5 digit?

@fredrikhamrebjork8930 Жыл бұрын

Hi! Making a 4 or 5 digit version will be a lot larger, it will also require a better way to reset your counter than via a crank. Imagine resetting the counter from 56342 to 00000 for example. But I plan on doing that on my next version, however I haven't figured out a good way to do that yet.