You talk like you're writing an essay that has to have a minimum of 5000 words. Stop it.
@ecotronic66225 күн бұрын
I had this stupid issue too. I solved it thanks to your video. Thank you.
@wajhoongra9 күн бұрын
This was so helpful!! Used it for my 2013 Toyota sienna xle
@Jabpancho-om9sd10 күн бұрын
Thanks for a great video. Would love to install these on my existing system but not enough room in my main panel to place the CTs. Wonder if I can open up the sealed meter box next to my main panel to find some room to install the CTs
@check_aboutsection10 күн бұрын
Thank you!
@bubarsmith11 күн бұрын
The 2 bolts that attach to the upper rear door slider rail brace are M6 X 1.0 X 25, part #90080-10252. Using a screwdriver to loosen and tighten these 2 bolts may be the best way to do so.
@bhavyagupta889611 күн бұрын
Voice is not clear...can someone say how to do it
@svilenbsabotinov12 күн бұрын
Thank you! Благодаря!
@edge2science14 күн бұрын
Thank you clean straightforward directions.
@jasonanthony445914 күн бұрын
bro thank you so much
@sandrollavanelissaGUIRAUD15 күн бұрын
Thanks you, It's very goud
@hplat-vku16 күн бұрын
thank bro
@Delicious_funny17 күн бұрын
Total cost ??
@KairrahNicole25 күн бұрын
When I borrowed my uncle's computer I forgot how to do it. I keep searching! Finally I found it! Thanks!
@sarthakshah3699Ай бұрын
Helpful info, thanks
@kuoseow2206Ай бұрын
you the best .
@jeffersonmarvel5189Ай бұрын
Not working for me, or must restart the PC?
@DIAYGАй бұрын
You shouldn't have to restart the PC. Did restarting fix the issue?
@DenaWaldАй бұрын
Just came across this vid, and it's great. My only issue is, I can't even get the door opened to start removing stuff. Seems like the cable is jammed somewhere causing the door to be stuck and not open manually. Anyone else had that issue?
@DIAYGАй бұрын
I had the same issue, so I cut the cable from the inside with the door half opened. Once the cable was cut, I was able to open the door. I hope this helps.
@DenaWaldАй бұрын
@@DIAYG The question is, how do you get the door even half open when it won't budge from the closed position? I can't remove the panel to cut the cable because the 2 phillip head screws to release the panel are not accessible.
@adrianjnaidoo3920Ай бұрын
worked perfectly, thank you bro
@DIAYGАй бұрын
Glad this worked for you.
@patrickpk6299Ай бұрын
As others have noted, nails are much stronger in shear strength. They do sell structual screws with comparable shear strength to nails, but deck screws are not an acceptable replacement. Deck screws are brittle. Try screwing a deck screw into a board halfway and hitting it sideways with a hammer...it will snap off. A nail won't, it will bend over
@DIAYGАй бұрын
Agreed. Thank you for the constructive feedback.
@gregphillips2232Ай бұрын
Very straight forward, easy to follow instructions. Thanks!
@DIAYGАй бұрын
Thank you for the positive feedback.
@matthewslagel1630Ай бұрын
Thank you so much!
@dayalcober89Ай бұрын
Thanks bro, you saved me!
@DIAYGАй бұрын
Glad you got this fixed.
@AnthonyandIsabellaАй бұрын
YEXYEXYEXYEXYEYXEYXEYXEYXEYEYXYEXXYEXYEXEYXEXYEX
@MrOele3D2 ай бұрын
Just finished my repair. spot on, other than the piece of window trim. Might wouldn't budge, but I was able to work around it. I found the sweet spot for using a ratchet on the 2 pulley bolts is when the door is almost closed.
@DIAYGАй бұрын
Glad you got this fixed. I hope you found this video helpful.
@user-vt6jn8qt1l2 ай бұрын
Thanks for sharing your video, it helped me fix my car door
@DIAYGАй бұрын
Glad you found this video helpful. I appreciate the feedback.
@luvs2fish3382 ай бұрын
Saved 90.00 in 5 minuted. Thanks a million.
@DIAYG2 ай бұрын
Glad to hear that. Thanks for the positive feedback.
@AliaEmad-xz3bt2 ай бұрын
Am so sad because it didn't work with me😢😢😢😢😢
@NaomiQuintans2 ай бұрын
hey I have a similar issue but with me it shows some and some not, I do have a lot of files so I deleted the cache but still nothing helps, do you have a tip for me on how to fix this issue
@DIAYG2 ай бұрын
If you have a folder with a few pictures (say 5-10), do you see the thumbnails there or just icons? My guess is that the thumbnails are taking longer to load when there is a folder with a lot of pictures.
@tetesukkosodok54692 ай бұрын
Thank you. This method works on 2018 Sienna as well😀
@DIAYG2 ай бұрын
Thanks for the feedback. I'm glad it worked for you on the 2018 Sienna.
@placidqualm2 ай бұрын
If this didnt work for you: I found that moving your images (or folder of images) from one location to another fixes it. Then move them back to your desired location and voila! I’ve since shut down my pc, so when i boot it back up later i’ll check to see if this was a permanent fix.
@christineemerick74602 ай бұрын
It Worked! Thanks! Why did windows toggles this to be 'Always show icons'? Does it save on space or processing time?
@DIAYG2 ай бұрын
Glad it worked. Not sure why Windows does this. It may help a bit with processing time on much older computers, but won't make any difference with newer ones (Intel Core family of processors or AMD Ryzens).
@tubzoo7772 ай бұрын
Very useful. The part numbers are incorrect though. The driver side's part number is 85016-08011 (replacing 85016-08010), and the passenger side is 850150-8011 (replacing 85015-08010 as you listed).
@TheWilferch2 ай бұрын
I still can't find the right number, even with your update. What's the part for a 2016, right side? Car is 2016, AWD, 3.5L.... is it 850150-8011 ? Doesn't seem right. (LATER EDIT...this is correct).
@DIAYG2 ай бұрын
Thank you for the positive feedback and for noticing the updated part numbers. I have corrected the description with this info. I appreciate you taking the time to let me know about this change.
@100pureshite52 ай бұрын
Thank you!
@ratt572 ай бұрын
Doesn't work at all. "Always show icons" was not enabled, View is set to medium icons, and video icons still don't show up.
@placidqualm2 ай бұрын
I had the same issue where his fix didnt work for me. I found that moving your images (or folder of images) from one location to another fixes it. Then move them back to your desired location
@craigpeterson102 ай бұрын
I would strongly suggest that before re-assembly of the brake caliper, the upper and lower Pins in the caliper cage should be greased using a high temperature brake grease to make sure the callper cage itself can slide freely as the brake pads wear down. Otherwise, the brake pads may not wear evenly. If you see that the old brake pads did NOT wear evenly, most likely that was because those two pins were dry and did not allow the cage itself to move when the pads wore down.
@DIAYG2 ай бұрын
Excellent constructive feedback. Thank you for taking the time to share that tip.
@william-bb8ub2 ай бұрын
SCAM
@kehleo87912 ай бұрын
thanks bro
@makimikee2 ай бұрын
Thank you! :)
@DIAYG2 ай бұрын
I hope this video helped.
@lyslyslys77532 ай бұрын
Thank you!!!!
@roycordova40862 ай бұрын
What's the wiper blade lever name
@agenelfenelus11912 ай бұрын
Hey brother thank you for your video on KZfaq. By the time I'm watching your video I fixed my passenger side windows effect from recharging my batteries yesterday. I fixed it now an excellent video
@DIAYG2 ай бұрын
Thank you for the positive feedback. Glad you got your windows fix.
@Mm2vids.2 ай бұрын
Thanks
@pizzahb16672 ай бұрын
thanks so much!
@federicomichelotti41882 ай бұрын
Thank you so much!
@DIAYG2 ай бұрын
Glad it helped!
@Shmoman453 ай бұрын
2015 has push button not key. Worthless video
@gannom3 ай бұрын
You are my hero!
@DIAYG2 ай бұрын
Thank you for the positive feedback. Glad you got it fixed! :)
@babyshaya3 ай бұрын
Some people took off the white plastic before mounting it on the motor. I did not take it off either. Y'all think it makes a difference ?
@TheWilferchАй бұрын
Toyota tech bulletin for this work says to remove the white plastic...... but at the same time they say be careful not to separate the spool afterwards or unspool it. Seems this vid and others keep it in.....and I would say leaving it in (if it still works as it seems to be)...is better because it helps keep all the stuff together and keeps it from unspooling. Anyone else here with guidance? Bulletin---> static.nhtsa.gov/odi/tsbs/2019/MC-10162772-9999.pdf
@user-vr9ng1le3u3 ай бұрын
Thank you so much you just help me fix my little brothers hoverboard ❤
@DIAYG2 ай бұрын
So glad to hear this video helped you fix your brother's hoverboard. Nice job! :)