i was doing training A the whole time lmao (I hated the tornado v3), but switching to the weilong v10 basically made me free
@JusTwistCubing2 күн бұрын
That feeling when it clicks after buying a new cube, so sweet (a piece magnet on my tornado broke today...)
@phalabun78903 күн бұрын
Wow an anime fan thats a cuber. Btw hope for you to get 1k subs
@JusTwistCubing3 күн бұрын
Thanks so much! Means a lot!
@marnidy5 күн бұрын
Haha i use the first one, i haven’t learned cfop that Well yet
@JusTwistCubing5 күн бұрын
It is definitely fine to use the first one! It's the least risky option for a timed solve, but knowing the other two algorithms really helps because they’re always available when I don't want to rotate. By the way, when using the first algorithm, it’s ideal to solve it at the back, so I usually make a y' rotation instead of y!
@marnidy5 күн бұрын
@@JusTwistCubing thanks for the advice! My pb rn is 49 seconds But I’m hoping to be sub 30 in Maybe 2 months
@JusTwistCubing5 күн бұрын
That's nice! Great that you are already learning CFOP! Just keep cubing and become more and more addicted (in a good way :)) I am sure you can reach sub 30 soon.
@rubiklgb215 күн бұрын
I think you should buy both because WRM V9 and WRM V10 are very good and very cheap❤
@JusTwistCubing5 күн бұрын
Yeah both are amazing cubes and have great value-for-money!
@EnderElite077 күн бұрын
Hey bro will 4×2 mm n48 magnets work?
@JusTwistCubing6 күн бұрын
I dont think so. 3x1.5mm has perfect fit, so with 1mm wider diameter it's probably not gonna fit! I heard 3x1mm would work though (less thickness but same diameter). Good luck!
@EnderElite076 күн бұрын
@@JusTwistCubing thank you so much!
@JusTwistCubing6 күн бұрын
No problem!
@WildScaryFox7 күн бұрын
I like to use a sledgehammer on the last pair to orient the edges or skip a dot oll
@JusTwistCubing7 күн бұрын
Yeahh great idea I should've added it (sucks when I get awkward cases after tho)
@mrswuggywuggy18338 күн бұрын
Is it just me for people find the pieces pretty fragile and magnets dropping easily
@JusTwistCubing8 күн бұрын
I have seen videos and posts about V10's core stem breaking but I think I haven't heard about its pieces and magnets breaking (the pieces have relatively thin plastic but so far so good for me!)
@mrswuggywuggy18338 күн бұрын
@@JusTwistCubing noted
@americancow5988 күн бұрын
V10 is too tight for me so I wish I bought the maglev ver but I’m broke
@JusTwistCubing8 күн бұрын
Yeah maybe Maglev is smoother but I feel that even Maglev V10 i's a bit too tight..
@Babak-x1i8 күн бұрын
You are really a good teacher. Thanks
@JusTwistCubing8 күн бұрын
Thank you! 😃
@RubiKubiK3138 күн бұрын
The 3rd one
@JusTwistCubing8 күн бұрын
Same! I used to do the 2nd one until I found the 3rd one
@RubiKubiK3138 күн бұрын
@@JusTwistCubing I agree, but you can use both depending on the angle you get it
@JusTwistCubing8 күн бұрын
@@RubiKubiK313 Yeah true, I like the 2nd one mirror alg on the LB slot more for some reason
@Babak-x1i8 күн бұрын
Great way to explain. Fantastic 👏👏👏👏👏
@JusTwistCubing8 күн бұрын
Thanks! I hope it helped!
@phalabun789012 күн бұрын
Can you one say do a rating radar for v3,v9 and ys3 it'll be cool to watch.
@JusTwistCubing11 күн бұрын
Yeah I will definitely work on a video including rating radar graph for each cube you mentioned!
@phalabun789012 күн бұрын
I have a list of cubes that I want but don't know which one to get: RS3M V5 ballcore Weilong V10 20 core springs Weilong V9 8 core Weilong V9 20 core Tornado v3 Gan 12 maglev uv or leap Gan 11 m pro I have inaccurate turning,don't mind fast cubes, like strong magnets but not a cube too uncontrollable. I'm neutral about corner twists and can always tighten the cube and very cautious about the quality of the cube. I'm more of a feeling guy so I mind performance but not too much and care about the feeling of the cube. I have a budget of about 75$ More info: I constantly lock up on the v10 standard, find the meilong decent and find the tornado mid idk if it varies from setup.
@JusTwistCubing12 күн бұрын
Thanks for asking! First of all I don't have all the cubes from the list you provided, I have V10 Maglev ballcore, V9 8-ballcore, and Tornado V3 flagship. But based on the description of your preference, I think we have similar preference in terms of the feeling of the cube. Personally, V9 8-ballcore is my absolute main, it has strong magnets (probably the strongest in the market?), forgives inaccurate turning (I loosened the screw by around 90 degrees from the factory settings), good quality (V3 and V10 are relatively more fragile), and its controllability suits aggressive turning style. Based on others' review, I think RS3M V5 Ballcore is also a good alternative, but I haven't bought it yet. But ever since I got my V9 8-ballcore, I never switched my main cube. Since it seems like we have similar turning style, I'd suggest going for it!
@phalabun789012 күн бұрын
Hi what speedcubeshop lube should I use for this cub? What compression do u have?
@JusTwistCubing11 күн бұрын
Hmm I prefer smooth turning so I use Martian and a bit of Lunar on my V9, but some may prefer more controllable feeling so Galaxy or Nebula can help! As for settings, I set my V9 to 3 clicks and I loosened the screw by around 90 degrees on each side! (I always find Moyu factory settings of center travel distance a bit too tight)
@phalabun789011 күн бұрын
Thx
@GünMeteUysal14 күн бұрын
Is that 54 mm?
@JusTwistCubing14 күн бұрын
My Guhong is 56mm! But the same magnet size should work!
@GünMeteUysal14 күн бұрын
@@JusTwistCubing Ok, thanks!
@vvings918 күн бұрын
Do corner twists annoy you 😂
@JusTwistCubing18 күн бұрын
Honestly not really. I get like 1 conrer twist every 2 to 3 days, I am not very bothered by it (my tension setting is also quite loose)
@Lenchnetmc18 күн бұрын
Wats yor cube
@JusTwistCubing18 күн бұрын
It's Weilong V10 Maglev Ballcore!
@TwistoTurn12323 күн бұрын
Pro editing
@JusTwistCubing22 күн бұрын
Thanks a lot!
@Gytoy-bj8up23 күн бұрын
2
@alorpotherjatri630623 күн бұрын
Hey bro which magnets should i use on 55mm spring version guhong pro? And where can i buy the magnets in Bangladesh
@JusTwistCubing23 күн бұрын
I only have the 56mm GuHong and I used 3x1.5mm magnets which fit perfectly. But I researched about other sizes (55,54) of GuHong and I believe the same magnets would work! (www.reddit.com/r/Cubers/comments/16tqfs2/comment/k3ksph5/?) As for where to buy it, I bought it from Amazon, is Amazon available in Bangladesh? I think Aliexpress also has them available at cheaper cost, do you have access to Aliexpress?
@spacedude2.024 күн бұрын
What size is the magnets needed to magnetize the 56mm cube edge pieces?
@JusTwistCubing23 күн бұрын
My GuHong is 56mm and I used 3x1.5mm magnets which fit perfectly!
@alorpotherjatri630624 күн бұрын
Can i use 4x2 size magnets??
@JusTwistCubing24 күн бұрын
I don't think so. 3x1.5mm fit perfectly so I think a larger diameter or thickness wouldn't work.
@alorpotherjatri630624 күн бұрын
@@JusTwistCubing I cant find 3x1.5 magnets i just find 4x2 can u tell me where can i get 3x 1.5 magnets in cheapest prize and cheap delevery charge?
@JusTwistCubing23 күн бұрын
@@alorpotherjatri6306 For me I bought it on Amazon, I just searched for 3x1.5mm magnets. But I heard that you can also get it from Aliexpress, the cost is cheaper on Aliexpress (I haven't ordered from Aliexpress though)
@PejalanAngkasaRaya25 күн бұрын
The sandy friction feel is so real 😂
@JusTwistCubing24 күн бұрын
Yeahh exactly, really different from V9
@PejalanAngkasaRaya25 күн бұрын
Hey! Just asking How do you take the piece out without breaking the core? I've heard some v10 broke when removing a piece
@JusTwistCubing25 күн бұрын
Yeah I had heard about others' V10 breaking before I got mine so I was very careful with taking the pieces out. I set all the tension settings to the lowest so that it's easier to take it out. Then I turn the top layer for 45 degrees, pull away the 2 corner pieces, and take the edge piece out very gently (I tried not to force it and just wiggled it). I hope that helps!
@PejalanAngkasaRaya25 күн бұрын
@@JusTwistCubing Thank you! It helps a lot, I managed to take the pieces out and clean them and set the tension and elasticity to 2,2 and i think i like this cube
@JusTwistCubing24 күн бұрын
@@PejalanAngkasaRaya Glad it helped! I really like the V10 as well it feels so unique
@priyankajaiswal466025 күн бұрын
2
@TwistoTurn12325 күн бұрын
How do you only have 332? U deserve 100k
@JusTwistCubing25 күн бұрын
@@TwistoTurn123 Thanks so much! Really appreciate it. Gotta keep grinding!
@WildScaryFox26 күн бұрын
I do it regripless
@JusTwistCubing26 күн бұрын
Yeah I used to regrip when I first learned but after getting used to more advanced fingertricks doing it regripless is faster
@chidaken931926 күн бұрын
2
@quleth0928 күн бұрын
I regrip in R'
@Sam2976929 күн бұрын
#2
@somuchstonk_archive29 күн бұрын
The reason why the corner cutting is worse than the V9 is because the corners are a bit different. On the V9, it was more rounded (?) than the V10. For this reason, the V9 has more corner twists than the V10. Also sorry for bad english.
@JusTwistCubing29 күн бұрын
Yeah I agree with you, and I think the larger size of the ball-core may also have an effect.
@Denn41Ай бұрын
What size is the magnet?
@JusTwistCubingАй бұрын
The size is: 3 x 1.5mm!
@angelonemusicaАй бұрын
Get both :)
@JusTwistCubingАй бұрын
Get V9 + V10 or 1 Gan 14 😁
@waffles1585Ай бұрын
Me with my rs3m v5 ballcore
@JusTwistCubingАй бұрын
I don't have the V5 yet, if I buy one I will surely try to compare it with them too
@waffles1585Ай бұрын
@@JusTwistCubing its like the weilong v9
@JusTwistCubingАй бұрын
@@waffles1585 Maybe I will like it a lot then!
@waffles1585Ай бұрын
@@JusTwistCubing i feel like its a mix between the super rs3 v2 and the v9, out of the box, its very fast and requires setup. i recommend putting heavier lube or a medium speed lube to help slow it down. mine has the angstrom lube setup with dnm 37 and my spring compression is set to 4. the tensions are set to make the cube fast and stable.
@JusTwistCubingАй бұрын
Thanks for the info I will keep in mind! The next cube I buy will probably be V5, really wanna try it.
@wanniesupАй бұрын
Jesus loves us all gj
@JusTwistCubingАй бұрын
Thanks and hope you get last layer skips!
@CutechickensinagardenАй бұрын
Nice I have the v9 with 20 magnet ball core and it is a bit too fast
@JusTwistCubingАй бұрын
Yeah I suppose V10 is a slower cube. Is the 20 mag V9 even faster than 8 mag V9?
@CutechickensinagardenАй бұрын
I don't have both, but I guess it is a bit more controllable because it has 20 magnets in the bc instead of 8, but their are both really fast
@JusTwistCubingАй бұрын
@@Cutechickensinagarden Yeah and probably a bit heavier too. Would love to try it some day and compare with 8-magnets ballcore
@Cuber_SafiАй бұрын
I'm *so excited* to buy the *Guhong Pro* for my main cube after the *RS3M V5!* 🎉🔥🤩🌀✨
@JusTwistCubingАй бұрын
Both are great cubes hope you have fun with the GuHong!
@UniversoAnimado-mu2wtАй бұрын
Hi mu friend, How ARE you? I have a question, what cube used you in This video?
@JusTwistCubingАй бұрын
Hi! The cube I used was WRM V10 Maglev Ballcore!
@MoyuGuyАй бұрын
are you drunk?
@100mcuber4Ай бұрын
The only problem is the corner cutting imo
@JusTwistCubingАй бұрын
Yeah it isn't the best but I think it is possible to get used to it
@minhtientran9528Ай бұрын
can you mod the edge magnets for the super rs3m
@JusTwistCubingАй бұрын
Sorry I'd love to but I don't have super rs3m...
@thomb.9013Ай бұрын
you should've called it the guhong pro m(ax) not guhong pro m plus.
@JusTwistCubingАй бұрын
Great advice! Sounds more fitting! Gotta make changes to the thumbnail later
@CrobruhАй бұрын
I use this case but when u get the pair in the front right u could do a D2 first so u don't have to rotate
@JusTwistCubingАй бұрын
Do you mind typing out the alg? I'd like to try!
@CrobruhАй бұрын
D2 R2 u R2' u' R2 D2
@JusTwistCubingАй бұрын
That works great, thanks!
@Cuber_SafiАй бұрын
but bro don't I have to add repelling magnets to the ball Core please reply
@JusTwistCubingАй бұрын
Not on the Guhong Pro M! Because the cube already has core magnets.
@Cuber_SafiАй бұрын
@@JusTwistCubing yeah I am just too dumb to realise this
@JusTwistCubingАй бұрын
@@Cuber_Safi haha you probably just forgot
@Cuber_SafiАй бұрын
@@JusTwistCubing yeah that's true N38 magnets will fit perfectly right
@JusTwistCubingАй бұрын
@@Cuber_Safi Actually I am not so sure about the magnet strength. I just searched 3x 1.5mm magnets on amazon, it didn't really tell what the strength was.
@gamerderubiksАй бұрын
Question: should I upgrade my v9 (same edition as you use in this video) for a v10 maglev ball core or a tornado v3 pioneer? This is my dilemma
@JusTwistCubingАй бұрын
I have the Tornado flagship version, and as a V9 main, I prefer the V10 over the Tornado flagship. If you are like me who enjoys the way V9 turns, I am not sure if you will enjoy the Tornado as much. Cuz the magnet strength is much weaker (even at strongest piece-to-piece magnet strength), and the turning on Tornado has more friction (it feels like you have to make a complete turn to move a layer, whereas with the V9 you just need a push). I am not sure how different the pioneer is from the flagship though so I am not sure if my comparison is relevant. For the V10, I didn't enjoy it that much at first, because it feels very distinct from V9. But after almost a month, I actually enjoy it a lot now and get similar times on both cubes! Hope that helps!
@gamerderubiksАй бұрын
@@JusTwistCubing Thank you! Flagship is probably very similar to the pionner so it really doesn't matter. I had a chance to test an pionner before. It had a TON of lubs so it felt soft but kinda hard to turn. As by now, I have just like 3 3x3, so I don't have any references of turns and all of that. Because of this, I was "sad" buying the version 10 of the same cube as I have, thinking that, aside the new adjustment sistem, it would be the same cube. It's like buying an IPhone 14 and then an IPhone 15. Now, knowing that v9 and v10 are a lot different, I'm ok at buying it. For this reasons and that breaking v3 core stuff, I decided that i'll buy v10. This helped a lot!
@JusTwistCubingАй бұрын
Yeah I was surprised by how distinct V10 feels compared to V9, and more surprised by how both cubes have become my main (depends of if my hands feel tired). If you are looking for a cube that feels different then V10 shouldn't disappoint you even though they are in the same series! Probably another thing to consider is that the V3 came out in 2022, we can't really tell when the V4 is arriving. Im glad it helped and good luck!
@thomb.9013Ай бұрын
I did this but I didn't use enough glue so it ended up with the magnets just falling out so I decided to manually take them out didn't really notice the difference much anyways. a more significant mod I did is UV coating.
@JusTwistCubingАй бұрын
Yeah I think many cubers prefer the soft feeling Guhong has without edge magnets. I'd love to try UV coating some day (maybe on guhong and YS3M).
@kavackmatbaareklam8169Ай бұрын
for me: v10: 6 ------ v9: 3
@JusTwistCubingАй бұрын
Nice!
@skellq4385Ай бұрын
I personally hate strong magnets. It ruins the soft feel and smooth feeling. I removed all the corner to core magnets on my gan 14 and liked it more. Less clicky, and more smooth. Thats probably just me, I dont think anyone else would like that. On another unrelated note, I think I have a very very aggressive turning style, but I can do 100+ solves on a cube that people say has bad corner cutting without a single lockup. I think people are becoming much too over reliant to corner cutting. Its like they cant maintain control without good corner cutting and magnets. Edit: I realized if done right with corner magnets, it can make it soft too, but many companies are making it too strong. I hate edge magnets
@JusTwistCubingАй бұрын
Yeah I think it all comes down to personal preference and what our hands are used to. I stopped cubing for a few years and when I came back to it I found it quite hard to adapt to the strong magnet strength in modern cubes. But after some months of practicing, I struggle with accuracy when I pick up cubes that aren't as magnetic lol.
@phalapanhathysak5935Ай бұрын
i love ur content:) ur underrated
@JusTwistCubingАй бұрын
Thank you, it means a lot!
@JusTwistCubingАй бұрын
To the 12 viewers of the first upload: sorry for the reupload but I had to fix that crucial mistake😅