2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
3 ай бұрын
3 ай бұрын
3 ай бұрын
4 ай бұрын
4 ай бұрын
5 ай бұрын
5 ай бұрын
Пікірлер
@tylerfrogley1227 23 сағат бұрын
Is the single stage trigger some part or is it a modificatiob
@Civtex 2 күн бұрын
Oh my oh my oh my..that is a thing of beauty!
@lsbzcuz 3 күн бұрын
my gas tube shakes a little, what can i do to fix?
@mk3firearms 3 күн бұрын
Weld it up and re-cut it.
@TheRealWinner1 4 күн бұрын
BADASS!!
@MartinsMachines 4 күн бұрын
What is the functional/reliability differences between say a 3in barrel like the SSH and something closer to the receiver like you MKOs? Can your MKOs function without a can or is the barrel too short at that point for reliable cycling? Interesting in having some work done by you guys regardless just trying to pick the best base for me thanks!
@mk3firearms 4 күн бұрын
@MartinsMachines 4 күн бұрын
@@mk3firearms will be reaching out!
@2realink279 5 күн бұрын
That’s an awful lot of overtravel
@mk3firearms 5 күн бұрын
Um yea, it's a double action trigger. It can't be tolerance like a SAO single stage trigger.
@dane1976 5 күн бұрын
Nice work! Can you provide links the mods? I’m liking that trigger setup! ❤
@mk3firearms 5 күн бұрын
@jakemiles8070 6 күн бұрын
How much to have one shipped in and customized?
@mk3firearms 6 күн бұрын
@ShooterQ 6 күн бұрын
Aside from not scaring people, having the hammer folded in while still ready makes a significant difference to me for concealment and comfort. Used to have a pretty welt in my side from the BHP hammer.
@G.M.E84 6 күн бұрын
You guy's make a great looking pistol look better every single time
@mk3firearms 6 күн бұрын
Thank you!
@podegenst0ner303 9 күн бұрын
Dope AF
@bend6470 10 күн бұрын
If this were USPSA and that was a LO gun would the porting turn it to an Open Div gun?
@mk3firearms 7 күн бұрын
I'm not sure. We just build them sir.
@supersaiyanx3 10 күн бұрын
Do you guys still do work like this? I want y’all do do my cz 75 compact. What’s y’all’s email or instagram?
@mk3firearms 10 күн бұрын
instagram.com/mk3firearms/?hl=en
@mk3firearms 10 күн бұрын
@ChocolateStranger 11 күн бұрын
Beautiful work, clean pistol. Might need to get this done with your shop.
@mk3firearms 11 күн бұрын
@leftyo9589 11 күн бұрын
dont like the hi power..... that boy aint right!
@narco831envy 12 күн бұрын
Best looking scar
@kensilalvarado3609 12 күн бұрын
Beautiful peace👌
@randominternetprofile8270 12 күн бұрын
What trigger is this?
@mk3firearms 12 күн бұрын
It's a factory trigger with our single stage trigger job.
@randominternetprofile8270 11 күн бұрын
@@mk3firearms same trigger on the other sao models?
@mk3firearms 11 күн бұрын
@@randominternetprofile8270 Yes the factory trigger that comes with the legion. With our SSSRTJ.
@randominternetprofile8270 11 күн бұрын
@@mk3firearms the 10mm doesn't come with a flat trigger
@mk3firearms 10 күн бұрын
@@randominternetprofile8270 Oh yea, this was a gray guns trigger I believe.
@lanebeck2660 12 күн бұрын
Badass!!!
@lema9821 13 күн бұрын
very smooth.. whats the lbs of recoil spring?
@mk3firearms 13 күн бұрын
This one is factory.
@Goodluck-hd5gp 15 күн бұрын
How much did this cost
@mk3firearms 14 күн бұрын
@ghostrideralex11 15 күн бұрын
What was the OAL with stock collapsed and unclasped (also with and without the suppressor) on this piece of art? Looking to SBR one in stainless myself and just curious.
@mk3firearms 14 күн бұрын
I don't remember.
@aist0n 15 күн бұрын
Sick work! Love that ghost camo 🔥
@mk3firearms 14 күн бұрын
❤❤❤
@blacksmithcowboy4725 16 күн бұрын
Are you still doing trigger work on the FNX45's?
@mk3firearms 16 күн бұрын
Yes.
@mk3firearms 16 күн бұрын
@weaponshottactical9761 16 күн бұрын
Whay would it cost to fetch this package done?
@mk3firearms 16 күн бұрын
@pcdubya 17 күн бұрын
This is art over mass production
@mk3firearms 17 күн бұрын
🖤🖤🖤
@ZanderJordaan 18 күн бұрын
Did you use the ak master mount side rail to attach the RS Regulate scope mount? I've got an R4 rifle, the South African version of the full size Galil, just trying to find out what's going to work. Thanks!
@mk3firearms 17 күн бұрын
We just used an AKM optics mount, I believe from AK builder.
@pcdubya 18 күн бұрын
Gorgeous as usual, noticed the 1911 serial # as well as some one else. Mulling one of these over now
@heniser 18 күн бұрын
Is there any difference in the CGW end result between a P01 that has or does not have an omega trigger?
@mk3firearms 18 күн бұрын
You can't put an omega trigger in the P-O1 their two completely different platforms.
@adorablepamplona7117 18 күн бұрын
how much do charge for that v6 porting if you dont mind?
@mk3firearms 18 күн бұрын
@sasha_exxe 20 күн бұрын
this possible on mkii?
@mk3firearms 19 күн бұрын
Yes.
@nativeflight7079 20 күн бұрын
Could I send mine in to get similarly outfitted?
@mk3firearms 20 күн бұрын
Yes sir.
@mk3firearms 20 күн бұрын
@ThorgalsWalhalla 20 күн бұрын
i think this is the most beautyfull gun in the whole world. And Marlin 40-75 is the most beautyful rifle.
@CMS069 21 күн бұрын
Very nice.... I have a Po1 that id like to send in....
@mk3firearms 20 күн бұрын
@anonymouscitizen2732 21 күн бұрын
She’s a beauty.
@zacharylatoriapullar3159 22 күн бұрын
What trigger is this? I have a s2c 😊
@mk3firearms 20 күн бұрын
It's our Single stage trigger job. You can get the flat triggers all over the internet.
@mk3firearms 20 күн бұрын
@kezakietuonaga8199 23 күн бұрын
Crowning or No same
@thomaswolf6507 24 күн бұрын
Just got one... haven't even touched the iron sights yet but looking forward to customizing it. Be well over 2k when it's finished. What front optic did you toss on yours?
@mk3firearms 20 күн бұрын
Most of the time Dawson.
@barriomarinerovlog3199 25 күн бұрын
Very nice😮😮😮
@JoseCruz-tu9nx 25 күн бұрын
AKM optic rail?
@mk3firearms 20 күн бұрын
Yes.
@alquitorianojr5055 25 күн бұрын
This is bad a$$
@rjenkins416 25 күн бұрын
how do i get mine done ASAP
@mk3firearms 20 күн бұрын
@elonmusk8667 26 күн бұрын
John Wick comes to this guy for his modified guns.
@mk3firearms 20 күн бұрын
❤❤❤
@DaveandDebe 26 күн бұрын
Why do your trigger jobs have 0 pre travel. They are at the wall. Don't see how that is good for competition. I have a ton of custom guns and I don't have any that have no trigger movement before the wall. Stange stuff.
@BullseyeBallistics-kf1jw 23 күн бұрын
What? That's the correct way to install a SAO. You should have the min. amount of pre-travel. For reliability you want a tiny bit just in case of any debri or carbon build up.
@DaveandDebe 23 күн бұрын
@@BullseyeBallistics-kf1jwno shit!,, these Triggers on the video have no pre-travel that's what I'm saying, it's direct wall with no pre-travel, apparently we're not watching the same video
@mk3firearms 20 күн бұрын
You're just not familiar with single stage triggers. It's great for competition because less travel = faster followup shots. You should try one on for size and see if you like it. We haven't had one person who has felt it that didn't prefer it. Yes it's and abnormality in the industry because its not easy to accomplish and takes a lot of R&D. Single stage trigger jobs are one of our specialties.
@DaveandDebe 20 күн бұрын
@@mk3firearms Awesome! 👍
@alquitorianojr5055 27 күн бұрын
That flat trigger is nice!!! I need it for mine!!!
@mk3firearms 20 күн бұрын
@alquitorianojr5055 13 күн бұрын
@@mk3firearms are you located in Las Vegas?
@mk3firearms 13 күн бұрын
@@alquitorianojr5055 Yes, Rancho and Cheyenne.
@alquitorianojr5055 12 күн бұрын
@@mk3firearms ok, I’ll be sending an email. I need a quote to have some work done on my shadow 2 compact
@johnzitro4770 27 күн бұрын
i have same unit. but its quire hard to rack
@gregl1961 27 күн бұрын
What trigger is on this gun?
@mk3firearms 20 күн бұрын
Cajun.
@claytonsorensen1596 27 күн бұрын
How much to mill the slide on a CZ compact or PCR for a Holosun?
@mk3firearms 20 күн бұрын
@claytonsorensen1596 27 күн бұрын
I have a Girsan Match grade Hi-Power…could you mill the slide for an optic?
@mk3firearms 20 күн бұрын
Yes sir.
@mk3firearms 20 күн бұрын
@Kvcustomrods 28 күн бұрын
Take my money..! Where and when can I send mine in..? 🤗🤗
@mk3firearms 20 күн бұрын