What’s the part number of the name of the part?

Whirlpool S-code will cover the labor" How much labor do I get? ~$150. 'Yep gonna charge the customer $250 labor. ' Thanks for the S-code, though. lol.'

i had to buy a $120 extension to my sds-plus rotohammer. but this worked!

Thank you for the great video brother!! I flip appliances and have the same dryer with the same problem. Will go and double check. This video will absolutely help a lot of techs out there.

Thank you, your videos are so easy to understand

I owe you a 6 pack..

Ese, Jack...Whats up...

Mr. JACK....What's up!!!..

🤣🤣🤣

great video, keep them coming!

Great. I've wasted so much life on what should be a 30 second video. Slow Bobby here has to show video of just stupid people at work as a "teachable moment". LEARN TO GET TO THE POINT, Slow Bobby....

Cool, what vacuum pump do you use and how your micron gauge connected to app?

What socket did you use and extension

one thing that bothers me about modern appliances is how they find it necessary to build Wifi into them. totally unnecessary. the whole system could be run on vintage components from 1980 and it would be more reliable.

Great post. This is the only (and easiest) fix that works for Samsung. Saved me a few bucks

That was it thanks bro

What area do you service?

11mm socket works like a charm.

How to Fix MayTag Washer Error Code F24

What does Error Code F24 mean on the HE 365 Washer

I hate working on these.

Thank you so much!

So how in the hell does that drill bit on hammer mode not damage the threads

can this be done on a model with the display screen?

Fresh wash same model error code AC6

ACTUALLY you can just lower the door by adjusting the door leveling screw on the BOTTOM of the door. The door was probably installed wrong.

Worked for me thanks

Thank you for the video. To everyone slamming you for not talking: (🖕). I found I found the video very helpful. If you are capable of replacing the seal yourself, you don't need an audile walkthrough. I was able to replace mine in about 30 min from start to finish, never disassembling my machine. I have a flexwash with the top unit and did not want to remove it from the laundry room and take it apart. I was finished with the whole thing in the time it would have taken me to just get the damn thing into another room. Thanks again for the great video.

Thank you! Never would have figured this out from what is written in the manual.

I wonder if tapping the board with the butt end of your screwdriver would have shown up that problem? My father taught me that trick as a fast troubleshooting tool.

Daleee goooo

Thank you for talking through the diag! Only video that I found that would actually show testing instead of just telling symptom and part to fix.

Sprayed a lot of wd 40 in after i removed the bolt.... kept wiggling and it came off,, glad i didn't have to use or rent any other tools.. about to replace the hub with the metal hub kit..

I have a Flex Washer but it is digital I have an error that says "power or play won't work while the machine keeps draining" Do you think the drain pump is not working?

What's 4c mean

Does the smart diagnosis from the LG app do anything or does it just return a status of everything fine regardless of the condition? I have one that is cooling to 59 degrees in the fridge and the smart diagnosis says all good. What does pushing the test button on the control board do? Does it run the compressor at some fixed level? The voltage to the compressor at CN201 reads 105V, 2.2kHz, can the problem be that the thermistor sensor is giving it a false reading and it thinks it's cooling to the correct temperature when it's actually 35 degrees higher than the set point? On these linear compressors, do they operate with varying voltage depending on different cooling requirements? The video mentioned 150V, is that a typical value but not necessarily a fixed operating point? The diagram shows an R Sensor, F Sensor, D Sensor, and RT Sensor. Are these the temperature sensing elements used by the control board? I briefly unscrewed the cap from the service port from the high side and heard a bit of refrigerant escaping, so the valve core may have a leak. Didn't have a gauge set to test it so maybe it lost some charge and is causing the poor cooling. Is the metal cap expected to hold pressure if the valve doesn't hold?

Mine did not look loose but I pressed down on it and ensured the connection was fine and it worked! Thank you.

Is the bolt reverse thread or is is Lefty lossey righty tighty?

IF YOU DONT HAVE A CONCRETE DRILL USE A HAMMER ON THE BACK OF THE EXTENSION PIECE

I need help with my washer

I would have replaced the inverter board first before the main board

Thank you for your video. I followed it all and have the complete fridge taken apart. All my fans work, coils, everything and i replaced the sensor. I still cannot get it to cool at all. Any suggestions?

Can worn shocks cause overload??

Ok, i have the same fridge, but in white, it stopped cooling. How do i fix it?

Hello, I tried this and would see if it would work. Question, how did you know about this? Is there a document/manual about this? Thanks

Any tips on replacing the top door?

This is the exact washer video i was looking for. Exact same washer. Thanks

On the control board which pins do you measure to check for the display? I couldnt see

Yo man….i think you should get another channel and post these type of videos…..this channel should be for appliance repair not video games ……..I will unsubscribe if I see another

Great information! Thanks for sharing! I have joined your channel!