Пікірлер
@MoMarinePrepper 6 күн бұрын
BTW - if you have any tips on how-to - I’m interested to see some ways of taking a whole model and breaking it down to manageable pieces to print; along with kit-bashing. Thanks again and keep up the great, to-the-point vids :)
@Darkwingdad 6 күн бұрын
@@MoMarinePrepper you’d need a different program to do that, something like blender, you have to go in manually and seperate the file with boolean cut tool
@MoMarinePrepper 6 күн бұрын
Thank you for this! I’m still trying to figure out how to use this, and doesn’t seem as intuitive as I would have hoped. I like the simple way you showed to subtract, and adding a cylinder overlay’ to do so when you can’t ungroup. I’ll def will use this. If you’d care to share any other ‘simple’ quick tips etc I would be most appreciative. Thanks again!
@bowl1820 7 күн бұрын
I got the HUAXIAYINZA0 Silk Copper Pla filament from Temu and it looked great. I even ordered a second spool of it. Also your not suppose take the blue seal off the vacuum bag. Theres a video on Temu showing how to use it and the pdf tnere says dont tear it off.
@Darkwingdad 7 күн бұрын
@@bowl1820 yea I’ve seen videos where you do & don’t take it off, they didn’t send instructions lol still got it to work though lol
@techguy38 8 күн бұрын
Is this video ever going to be released or did you decide to can it?
@Darkwingdad 7 күн бұрын
@@techguy38 it’s in the works, just some personal stuff going on, I apologize
@techguy38 7 күн бұрын
@@Darkwingdad Don’t apologize for free content! Appreciate you spending the time to even do this. Hope everything goes in a positive direction in your life 🙏
@Darkwingdad 6 күн бұрын
@@techguy38 I’m trying I appreciate it greatly
@MmSsGg 9 күн бұрын
How do you change the battery after it dies?
@Darkwingdad 8 күн бұрын
@@MmSsGg on which model?
@zerojackie3575 9 күн бұрын
Is it good for beginners for people who never use one
@Darkwingdad 9 күн бұрын
@@zerojackie3575 very easy to use & operate, great first printer & prints really fast too!
@zerojackie3575 9 күн бұрын
Thanks @@Darkwingdad I really appreciate it 👍👍
@rakanal.2925 9 күн бұрын
How dare you not print a bunch for print test 😂
@Darkwingdad 9 күн бұрын
@@rakanal.2925 lol
@RK-or1yo 14 күн бұрын
Your prints are amazing. Stumbled across your channel a few days looking into silk printing. My question(s) for you are what is your go to printer and slicer for most if not all of your prints? Is there one or two different types/ models you prefer?
@Darkwingdad 13 күн бұрын
For standard prints I like Bowden fdm printers user cura For klipper I love my k1 max & orca slicer
@rcd3drussellcad232 14 күн бұрын
Best upgrade for my K1 max was to use the B plate for the build surface, I have been printing PETG and the A plate seems to de laminate after a few prints, also I have the upgraded unicorn nozzles so jams seem to be less on these.
@Darkwingdad 14 күн бұрын
@@rcd3drussellcad232 I did upgrade to the hi flow nozzles and they work pretty awesome
@SaiderOfficial 15 күн бұрын
This tutorial was very helpful
@Darkwingdad 14 күн бұрын
@@SaiderOfficial thanks!
@Kostya_craft 15 күн бұрын
Make M16
@Combiesoldier3215 17 күн бұрын
Nice work bro
@Darkwingdad 16 күн бұрын
@@Combiesoldier3215 thanks!
@user-uf8dn6ib6i 17 күн бұрын
New subscriber bro!!🔥🔥🔥
@Darkwingdad 16 күн бұрын
@@user-uf8dn6ib6i love it!
@PERSO46 17 күн бұрын
cual es el emlace de descarga del casco?
@Darkwingdad 13 күн бұрын
Ahi tienes mi amigo! discord.gg/S7SGeuxS
@-Chooka 18 күн бұрын
I'm lazy I just poke the next lot of filament in the tube when the other is running out. you just keep pushing it in until the gear picks it up then just push a little more just in case there is a retraction, once an inch or so is past the drive you are fine to let it go by itself.
@Darkwingdad 18 күн бұрын
@@-Chooka it can def work that way, with DD it’s a bit trickier
@CheepCheepVR 19 күн бұрын
I like the into good helmet keep up the good work
@dangerclose6810 21 күн бұрын
Its always harder to sand something perfect before the Adderall wears off.
@Darkwingdad 20 күн бұрын
Lol
@ladyvanity6969 22 күн бұрын
Thanks just need to get the visual,😊😊
@Darkwingdad 13 күн бұрын
No problem!
@tjones3825 22 күн бұрын
The 3D Master's skills on full display!! My all-time favorite marvel hero!! 🔥💯
@critter42 25 күн бұрын
where is the full video? It says "up now", but I don't see it on your profile
@Darkwingdad 25 күн бұрын
kzfaq.info/get/bejne/mamirdGrnNKlZ40.htmlsi=LavUbEI0tn4BpiAY
@Darkwingdad 25 күн бұрын
There ya go
@TMad_3D 25 күн бұрын
Great work as always!!
@Darkwingdad 25 күн бұрын
Thanks brother!
@anibalancio 25 күн бұрын
This is exactly what I need, in Portugal doesnt exist Bondo but Liquitex, and my apartment it's too small and Bondo smells really bad and too toxic, thank you Dark!
@Darkwingdad 25 күн бұрын
Anytime!
@CorinthiansFB2 27 күн бұрын
Do you glue the jaw to the rest of the helmet? (Great video)
@Darkwingdad 27 күн бұрын
Yes or plastic weld
@keenang8592 27 күн бұрын
Thank you. I’ve recently got into 3D printing and I’ve been learning from your detailed video tips and strategies. I’m looking forward to applying these techniques to my next project. Keep up the great content!
@Darkwingdad 27 күн бұрын
Thanks man! Glad to help!
@anguismemes1666 27 күн бұрын
Temu xD
@Darkwingdad 27 күн бұрын
Elaborate…?
@AdamsSIMporium 28 күн бұрын
Hey, is there a setting to stop it faffing about for 2-3 mins before it starts printing? I print without calibration, that of course takes even longer, but even still it's a few mins before it lays down that first line. Or is it a necessary process? Thanks.
@Darkwingdad 26 күн бұрын
The printer still has an initializing period, so even if you don’t calibrate there’s still a delay.
@brainzgotnobrianz3340 29 күн бұрын
Pick up that can
@Shaerky Ай бұрын
Don't think I've seen a video with so much information, feel like I'm in my wood working classroom learning. This video was so so informative and I loved it. Thank you!
@Darkwingdad Ай бұрын
Haha thanks my friend! That’s what my channel is all about! Class is in session 😂
@Phantomshell Ай бұрын
dope shirt
@Darkwingdad Ай бұрын
Thanks man, they need to bring back the old members and get a revival going. Miss the early/mid 2000s HIM
@Phantomshell 28 күн бұрын
@@Darkwingdad I was lucky to see them on their farewell tour in ny a while ago, still have them in my daily rotation
@Darkwingdad 28 күн бұрын
@@Phantomshell sadly never got to see them, spent my HS & college years blasting deep shadows & brilliant highlights,razorblade romance & love metal. Valo’s new stuff just isn’t the same….I need a Time Machine.
@MillionMileDrive Ай бұрын
I would say don't use adaptive layer height. It results in banding in my silk prints where the layers are thinner vs thicker. The amount of shine is different between layer heights. Not so much an issue with regular PLA but I wouldn't use it on prints where a uniform finish matters.
@Darkwingdad Ай бұрын
I’ve had great luck with it, you just have to adjust the variance in the settings. My trick is setting the variable parameter lower so it can only get more defined on certain areas & not increase the height to cause the issues you seem to have.
@MOE13576 Ай бұрын
Thank s....if only they made bigger molds 😂.
@Darkwingdad Ай бұрын
Haha right?
@AtomicBleach Ай бұрын
Have you tried doing this but bumping up to a 8*18" 24w heater and slapping a fan in the unit? I wonder if this paired with a simple smart humidity/temp sensor would work? Those sensors can be picked up for like $15
@Darkwingdad Ай бұрын
I haven’t but that idea would definitely work!
@windsurfingphd Ай бұрын
That mask does not prevent anything because you are still smelling the primer. You should use 3M filtered mask. If you smell something, it is time to change the filter.
@Darkwingdad Ай бұрын
It does have a filter in the front & notice I have an exhaust fan & filter in my booth pulling the fumes out. Yes a respirator is the proper ppe but in this case this is better than using nothing as many often do.
@smallnuts2 Ай бұрын
Ill try this but the warning says runaway thermal, cooling something. Normally a runaway thermal screen just says what you showed. Mine is talking about cooling, power supply and fans, im wondering if its a fan or software issue because, I installed a silentboard board and this started happening.
@royanderson5538 Ай бұрын
Just need to confirm which "direction" to install the new fan. The fan should blow air onto the hotend? The alternative is the fan is drawing air around the hotend and blowing it out of the shroud.
@Darkwingdad Ай бұрын
Easiest way to remember is label facing the hot end, you want it to suck air in and blow it onto the hot
@royanderson5538 Ай бұрын
@@Darkwingdad the fans I purchased did not have a label.
@Darkwingdad Ай бұрын
@@royanderson5538 you want the fan blowing toward the hot end
@royanderson5538 Ай бұрын
@@Darkwingdad great thanks
@nitinsingh-yy7sd Ай бұрын
Big part is easy to smooth but small is hard
@Darkwingdad Ай бұрын
I’ve got other videos that show that, check em out!
@Bomfunknight Ай бұрын
FUCKING USELESS VIDEO wasted my time
@DanVogt Ай бұрын
Excellent video and instructions. I'd prefer music that is more chill, it would be less grating when there's dialogue / silence straight after, but at the same time it's your video and you decide; I appreciate that you shared it all so well. Great technique and result. New sub 🤙🎉🌿
@Darkwingdad Ай бұрын
I’m getting better at commentary & music selection no harm in open feedback, I appreciate it!
@DanVogt Ай бұрын
@@DarkwingdadCool mate. Your music taste is dope, my feedback is simply technical, to try to improve the good "flow"in editing. It's like when people upgrade their audio mics and get good shotguns or lavs; they forget to add an ambient room tone back into the edit ( without which it's so perfect it feels wrong! )
@Darkwingdad Ай бұрын
@@DanVogt I appreciate bro! Definitely something I can improve on, thanks!
@TormentedMisery Ай бұрын
I know I’m a year late but this is genuinely a great video. I’ve watched Frankly Built and other KZfaqrs and still had questions, but you went over everything and I really appreciate the attention to detail. Definitely earned a sub from me. Darkwing Dad u rock dude, keep doin u 🤘
@Darkwingdad Ай бұрын
I really appreciate the kind words! I always try to go above & beyond & cover all the essentials! I’m glad it helped!
@Marshy064 Ай бұрын
What do I do if I want to add a 3rd strap on the top connected to the other 2 on the sides?
@Darkwingdad Ай бұрын
I have a tutorial on that doing a Jason mask, check it out!
@Dro1D142 Ай бұрын
Are you painting, sanding, priming and sealing the inside of the mask/helmet as well or can that mostly be left alone?
@Darkwingdad Ай бұрын
I don’t do the interior much, not really needed.
@bryanm1094 Ай бұрын
Where do you usually get your blueprints from ?
@Darkwingdad Ай бұрын
This was off cults 3D I can link it to you if you want
@mikec6096 Ай бұрын
Lovely build, I tried doing one of these a while back, ultimately I was happy how it turned out build & paint wise, however I made it way too small for my fat head and drank way too much the night before the con so it was hell to wear but this vid is inspiring me to give it another go and get it right! Great work!
@Darkwingdad Ай бұрын
Haha yea toddies can ruin a day fassst lol where did you get your file from? I went in blind on this build but I think it turned out good. Hope it helps ya on the next build would love to see a finished pic when done!
@mikec6096 Ай бұрын
@@Darkwingdad 100% haha, I think the leather bit was the killer, was just so hot in there. I got the file from Etsy, they have another one of the Combine Suppressor that looks like it might be a good build too, I think they have a page on Cults as well with them on there. Definitely will, if all goes well, the next con over here (UK) I'm at will be November so will hopefully have it done by then hah.
@bashful3026 Ай бұрын
Also at 3:30 you could pick up a JST crimping kit, it’ll come with that exact same connector. I just recommend getting one because of maintenance like this. The pins in the black connectors only require a light push out with a flat head or even paper clip 👍 On Amazon the kits are like $10-$20
@Darkwingdad Ай бұрын
Very good point & tip for those without a soldering kit. Thanks for that!
@bashful3026 Ай бұрын
@@Darkwingdad after getting the kit I’ve been using it forever lol, this Father’s Day used that exact connector to rewire a rear backup camera to the back up light for my grandfather lol he originally had it on the switch in the front but he said “it’s annoying as hell!”
@Darkwingdad Ай бұрын
@@bashful3026 lol! Wiring is NEVER fun…or quick haha
@myahillerud9386 Ай бұрын
How long was the print time for the various components of the crown?
@Darkwingdad Ай бұрын
Using standard settings the main piece was 12 hours, each horn 5 hours.
@Seany75uk Ай бұрын
Great video do where was the helmet file from, love half life and would love to print this
@billytalentrocks345 Ай бұрын
If you own the game, it should be very easy to find a program to extract any model from the game.
@Darkwingdad Ай бұрын
I got in on cults, I can send you the link
@genises200 Ай бұрын
Amazing stuff! Will be following for that bambu lab settings for smother prints for busts and helemts
@Darkwingdad Ай бұрын
Thanks man!
@genises200 Ай бұрын
@Darkwingdad would you be able to show print settings for busts but for bambu labs/Orca Slicer
@Darkwingdad Ай бұрын
@@genises200 literally the video I’m editing now! Lol
@genises200 10 күн бұрын
@@Darkwingdad let's goooooo!!!!!! Thanks
@paulvin2010 Ай бұрын
go ahead
@Darkwingdad Ай бұрын
Yepppp