Superglue works?

Fun fact: my very second model that I bought also came broken! It was L-1011-500 ANA and it's tires on the front gear fell off

GREAT JOB JUSTIN! 👍👍

GeminiJets is not a toy but for collection only.

You can add Stansted and Glasgow

Hey. 1 question, i spilled a tiny bit of glue on my GJ 777-200ER and when i wiped the glue the paint got messed up. Can i paint it with acrylic paint??? (Glue was spilled on the engine)

You should add hangers

Does anyone here have any experience with removing "non-removable" landing gear on a model for an "in-flight" look for a display? I'm especially interested in a video of the process of sealing the opening so that it is flush with the model once the gear is gone.😊

Hello

Happy Thanksgiving 🎉

a tip for anyone with larger scale aircraft i.e. 1/200 + with the bigger aircraft like 757 up. if you are missing tyres as they can often disintegrate or just fall off you can just buy a pack of rubber O rings with a inner diameter of around 2 or 3mm and an outer diameter of around 6 to 8 mm and they work perfect for tyre replacements. you can also buy replacement landing gear from hogan wings for various types of aircraft. Nail polish remover works well in removing old glue BUT BE VERY CAREFUL AROUND PLASTIC PARTS, and when applying glue a toothpick works great as it only hold a small amount on the tip without applying too much glue and can get into small spaces, and last of all if an aircraft is beyond repair never throw it out just keep it for spare parts because trust me you will use them eventually

Yo I know this video is like 3 years old but wanna know something crazy? The Gemini delta MD-90 was also my first model and mine is also pretty damaged. Funny coincidence is you ask me lol Also, don’t you dare use hot glue on a model ever again. Go buy some gorilla glue microprecise. Trust me it’s a life saver

I have a Delta A321 i lost the engine

Nice video. Very creative. The only thing is the use of cotton to simulate the snow. The best choice would have been a dusting of baby powder on the airfield but that would have been messy to clean up later. Other than that, great video.

Nice vid

Nice update 👍

Price?

This is the best model airport I’ve ever seen

😮

Bro doesn’t know the parts of the plane💀💀💀💀💀

the hellow everyone sounded just like daily dose of internet

do the nose wheel come off because i purchased a model today and the wheel was not attached?

Gostei do seu aeroporto que você fez

donde se compran o donde se hace el tunel para entrar y salir del avion?

my delta plane got ruined cause my brother dropped aharpie so i tried to use alqihaul to remove it but it all got remvoed now it looks like a CRJ

5:00 That Delta 763 can be fixed. Just emailed GJ and asked for the replacement wheel. They will gladly sent it to you for free, you only need to pay for shipping fees

Hey do you have a picture of the battery set up?

Did you break the on by throwing them at two buildings?

Funny to see Nazaré Tedesco's meme on 8:21 haha

Loved the video! Seeing as you have so many models (so jealous lol) I was wondering if you could give me some advice on how to repair some damage. Basically I have 2 aircraft in which the paint on the nose cone has been chipped off (nothing severe, but it is noticeable). Luckily the chip does not affect the livery and is just on a white-washed section of the plane. Is there a way to almost repaint it/cover it up with something? Thanks in advance!

This is exactly why you aren’t meant to play around with them cuz they break lol (I did that too hehehe) (I only lost the 2 tires from the a330)

3:56 you’re not supposed to anyway lol

Once I bought my 2nd Gemini jets model, it was an A330-900neo limited edition airbus house colors scale 1:400, however a few days later BOTH Tires from nose gear went missing and now I just have an a330 with no nose gear tires :/

3:03 lol

Poor planes 😔

My current Airport is just a Paper Terminal with 5 gates and 2 levels and 10 parking lots. I also have 2 runways painted .

i would like to have a customized Geminijet , do you know what kind of paint do i need ?

GREAT JOB! Keep it up 😊!

could make a broken plane look like crashes on airport

One thing I'd recommend is not using hot glue for repairs (like in the vid it dries way too fast). For something like the wifi pods, even elmer's glue will hold it in for a while (just make sure you don't get the plane messy)

Graet video. Im thinking your row but the Aisle seat "D" is way to go.

Super glue would do a better job

Very cool

This airport looks amazing

Where did you buy the Finnair one?

How about the terminal template link

So like would you like to donate a airline since I guess you don’t want it😊

please make a vid of detroit metro airport

Ah sick your airport is super leaked, what a realistic idea. This reminds me of LAX Airport

Awesome video man, I’ll miss the airport updates for sure and I hope ur engineering pathway goes all well!