i hope i did buy this rubber rather than xiom jekyll and hyde v variant
@nathannelson68432 ай бұрын
I became one of Sean O Neill's students in 2016, he's been coaching me for seven years! I love Sean, he's a great friend and a great table tennis mentor! He's amazing and I'm proud to call him coach!
@garykamieneski90104 ай бұрын
My X-acto didn't seem to want to cleanly cut the rubbers requiring the use of large scissors. You didn't seem to have any trouble at all. Maybe I just need a fresh blade?
@SeanONeillPong4 ай бұрын
Fresh blade is answer. We use a new blade each paddle.
@garykamieneski90104 ай бұрын
@@SeanONeillPong that's helpful. I have 3 knives and they all don't seem to have sharp enough blades. I read that the No. 11 X-acto blade is the sharpest, most durable. Another question if you don't mind. Are Chinese rubber sheets shorter lengthwise than others? Two of the Butterfly blades I wanted to put new rubbers on require 16.6cm lengthwise and the Reator sheets I have are not long enough to reach the handle transition.
@SeanONeillPong4 ай бұрын
@@garykamieneski9010, Yes Chinese rubbers can be more square-like than Japanese or European brands. Regarding the X-acto blades, at Paddle Palace we want to ensure the absolute cleanest cut, so that is why we use a brand new blade for each of our customer's new paddle.
@garykamieneski90104 ай бұрын
@@SeanONeillPong I guess I have learned it the hard way, that maybe the bulk of Chinese rubbers are not long enough for standard Butterfly shake hand blades.
@datle28635 ай бұрын
Jiwei forehands give me chills
@diegox.longpips5 ай бұрын
So nice to find a video with you on it Carsten, nice explanation 🎉
@soulxine7 ай бұрын
Hello. May I know what the ideal degree for a backhand rubber? Bcs all my life, I only used rubber with 40 degree and below for backhand Is there any chance the reason why new rubber hardness has increase because the usage of new ball?
@masterspin77967 ай бұрын
I ordered it for my forehand last night 2.0 blk....also K1 1.8mm for my backhand...
@masterspin77965 ай бұрын
I did the switch-a-roo...now using the K3 on my backhand and K1 on my forehand I am playing better this way.
@BulkHealth7 ай бұрын
Thank you for your well explained review.
@JVVLOGTV9 ай бұрын
Short or medium?
@makwanapranav10 ай бұрын
Best review
@Doreamon93342 Жыл бұрын
What glue is suitable for it?
@cubekz87 Жыл бұрын
With (boosted) d09c fh it's spin monster
@aldopalacios3357 Жыл бұрын
Serg i have a question. How can this rubber be as soft or softer than T05 or D09C if it's hardness is 53°? Thanks
@zhuangcorp Жыл бұрын
Can you explain what you like this so much more than Dragon Grip or Bluegrip or Omega China?
@J_M_SWE_TT Жыл бұрын
I've been playing with the 2.0 on FH and BH with the Joola Freeze bat, exellent control. Can place the ball wherever I want when looping plus flat hits are perfect. Like mentioned in the video, counterlooping is so easy since the rubber grips the ball effortlessly. I enjoy this rubber, coming from Tenergy 05 FH and Tenergy 64 on BH.
@z0uLess Жыл бұрын
Have you had the opportunity to try Yasaka Rakza Z?
@z0uLess8 ай бұрын
?
@phtabletennisvlog4473 Жыл бұрын
I tested this rubber when it came out but didn't have too much success with it. I think it might be because of my stroke, which is very closed, as I'm used to very grippy, high throw rubbers. I get inconsistent results with this. Sometimes, the rubber slips and doesn't grab the ball so it throws the ball to the net. I can even hear it slip, so I know it slips. Sometimes it grabs the ball and throws it correctly with a lot of spin. This is the only hybrid rubber I tried, so not sure about other hybrid rubbers if I get the same result. I just stick with grippy rubbers like Tenergy 05 and Baracuda, which have both been very consistent for me.
@kzawhtun Жыл бұрын
On backhand, which thickness did you use 2.0 or max ?thanks a lot~
@jakeduenas2515 Жыл бұрын
Hows the weight
@fredriksigeman Жыл бұрын
Thank you! You are truly an asset to the table tennis community.
@garryilan9867 Жыл бұрын
Say me please, how about the quality of blades from the DONIC today?
@pnachtwey Жыл бұрын
So the top sheet is gummy as opposed to sticky? Stricky rubbers collect dust and lose grip during play. Sticky rubbers lose their stickiness over time.
@andresdanielcurielbermudez331 Жыл бұрын
Muy buen video
@josepinchero Жыл бұрын
great analysis! thanks! i just started playing w/ K3 on FH and Rakza7 on BH and love this combo. i'm a low intermediate player, working hard on getting my looping better. +1 on what Seth says about K3's ability to grab low balls to lift, which i like a lot. now i just need to improve my technique around these rubbers.
@nyanpass8965 Жыл бұрын
This video needs more views! Very inspiring and actually very real in amateur level.
@quebecer4605 Жыл бұрын
Thanks Seth! Do you think a lower level player could use K3 on my forehand?
@rajendrakumargupta2653 Жыл бұрын
Durability? How long it lasts?
@mrcadoia3 ай бұрын
very short.
@masterspin77962 ай бұрын
@@mrcadoia No true...
@PongTrashity Жыл бұрын
When is next tournament?!
@gitawulandari0433 Жыл бұрын
GITA
@dbweb.creative Жыл бұрын
What are the differences between this and Rakza Z? I wonder about the arc, bounce, incoming spin, chopping. Would you have enough bounce to bump up a ball from a defender on the table(reverse the backspin into a topspin)? With rakza I really liked the chopping and feel of the ball, but it was terrible for dealing with defender. Also the arc was lower with a dip at the very end. I want a rubber with a little bit of bounce (more than rakza z), with a short high arc, and good chopping feel. Do you like k3 in max or 2.0?
@mattwilansky5748 Жыл бұрын
Do you need only one layer of glue here? Or does that depend on the type of glue? Also any tips for reapplying used rubbers? I know to take the glue off but it tends to curl on my and not lay down as smoothly as a new rubber. Thanks!
@sandraforbes5907 Жыл бұрын
😡 🅿🆁🅾🅼🅾🆂🅼
@lilipop3209 Жыл бұрын
what is the lifespan of this rubber ? and how often do you change it ?
@mrcadoia3 ай бұрын
pros say it last 1 month. many say 3-4 months. in forums.
@quebecer4605 Жыл бұрын
Great review! Could we see a Tibhar K1 review?
@dujonsharrer1122 Жыл бұрын
Easy enough. thanks!
@entity83292 жыл бұрын
Man was in my class 💀
@mihaic1442 жыл бұрын
Thanks for the great review Seth. Have you tried k3 on backhand? Or what do you prefer on bh?
@PechPongMatches-bx2qe2 ай бұрын
Yes I play with it both sides
@dickteteak1362 жыл бұрын
🅿🆁🅾🅼🅾🆂🅼
@adamszabo21392 жыл бұрын
Hi, thanks for sharing your thoughts. It would be very useful to report later, if you experience edges rising with this rubber topsheet. I have Tibhar MX-S and I was slightly disappointed with it, because two months after it was glued on my blade, the edge of the topsheet curled upwards a little bit, making the surface a bit concave, which reduced accuracy on thin loops. Also, I would also happily hear your thoughts on the upcoming Victas V>20 rubber, once it will be released worldwide.
@PechPongTT2 жыл бұрын
Hi, I don’t think I’ve had any problems with it I’ve had it for 2 to 3 weeks now and it’s been pretty flat, maybe more glue? And yes I would love to try out that rubber!
@aldopalacios3357 Жыл бұрын
I think you had a glueing issue with your MXS. I've had a couple of that rubber and never had a problem. Great rubber, by the way.
@nguyenanhquynh73222 жыл бұрын
nice, how do you compare this to Rakza Z? how heavy is this on Viscaria size?
@PechPongTT2 жыл бұрын
Hi, it’s 49.3 grams cut, and I have not been able to test the Rakza Z rubber yet, I would like to soon to!
@siddharthkhandelwal14202 жыл бұрын
Leo just bought Razka Z. Maybe at Samsons' tournament you can try it! Lol
@PechPongTT2 жыл бұрын
@@siddharthkhandelwal1420 sounds good! Yeah I would like to try
@MUDTV22 жыл бұрын
Nice review, what thickness did you use 2.0 or Max?
@PechPongTT2 жыл бұрын
Max sponge for me!
@rustyolgun2 жыл бұрын
Can i use this glue to fix a place where the rubber is slightly coming up? Would you apply it to both side in this scenario?
@PaddlePalaceTableTennis2 жыл бұрын
It is safer to remove the entire sheet and reglue, otherwise the smaller reglued section will create an uneven surface. You might want to take the prior glue off the sponge before regluing.
@joshmalinsky71132 жыл бұрын
Man a beast
@flowerintherain69562 жыл бұрын
jiwei. i have a humble request 🙏. please please please make full dept tutorial videos. your forehand and backhand are powerful just like the Chinese. the best i have ever seen among online coaches.please make it happen
@toekneema2 жыл бұрын
this is the first time i've ever seen Jiwei Xia play. HOLY MOLY. this guy would beat the brakes off Jishan jesus christ.
@toekneema2 жыл бұрын
ok he looks rusty but there were definitely some beastmode shots
@PaddlePalaceTableTennis2 жыл бұрын
Congratulations to Jiwei on defending his title and for Ryan for putting up a good fight!
@Roooy-88s3 жыл бұрын
midle pips...
@tomjensen6183 жыл бұрын
You were my idol Stellan and I kicked some ass back in my day. Tom