21 күн бұрын
Пікірлер
@BenExile 9 күн бұрын
The timer beeps before the shot is broken. The RO calls time late. Fair play for dropping the point and congrats on top Mil/LEO 👍
@jcprecisionrifle 9 күн бұрын
@BenExile Yeah the footage definitely shows the shot breaking well after the timer. Just bizarre that it showed in time on the timer??? Thanks 🙃 hopefully the 1st of many!
@JakeBurgessOutdoors 9 күн бұрын
Best stage videos in the UK 🇬🇧 👌🏻
@jcprecisionrifle 10 күн бұрын
The Timer said the last shot was in time, I didn't think it was and gave up the point... What do you think?
@adampurkey6565 15 күн бұрын
I would love to be able to spend 400 dollars on a bi pod
@jcprecisionrifle 15 күн бұрын
@adampurkey6565 yeah don't get me wrong, not everyone will want or even need a spenny Bi-Pod and will get on perfectly fine with a Harris clone. But for the money this is 👌 compared to the competition
@freelancer2011 15 күн бұрын
Got one just the other day - same needs and reasons. If you're doing the Leupold Steel Classic match, this weekend, please let us know how u get on with it!!! :D Would be good to hear!
@jcprecisionrifle 15 күн бұрын
@freelancer2011 I'm there right now 🙃 haven't used it yet other than zero but I will report back 👌
@jcprecisionrifle 13 күн бұрын
@freelancer2011 it didn't disappoint. I need to get used to knowing how high I need to set it for certain barricades etc but it performed perfectly 👌
@Framnesen 19 күн бұрын
Nice review mate👌🏼 love all the details! Keep this going!
@jcprecisionrifle 19 күн бұрын
@@Framnesen thanks bud 🙃
@randallwhite9015 22 күн бұрын
A review without a target is like a dog in a picture. Can't pet it.
@jcprecisionrifle 22 күн бұрын
@randallwhite9015 😅 Part two is coming, which will be specifically covering how it performs. Got a few issues to sort out first which again will all be covered in the next part
@PeppicoBF 22 күн бұрын
Thanks for the video
@jcprecisionrifle 22 күн бұрын
@PeppicoBF You're Welcome.. let me know if there's anything else you want to know 👍
@Rico11b 23 күн бұрын
I don't know what's worse. The fact that you purchased this overpriced bipod, or the fact that you actually told someone about it..
@jcprecisionrifle 23 күн бұрын
@Rico11b pricing is relative. Sure it's expensive. But when it's doing exactly the same as the competition for £230 less.. is it overpriced?
@Rico11b 23 күн бұрын
@@jcprecisionrifle It's doing exactly the same thing as two wooden sticks and a string. Much cheaper also.
@jcprecisionrifle 23 күн бұрын
@@Rico11b Okay... good luck with that 🙃
@Rico11b 23 күн бұрын
@@jcprecisionrifle Who needs luck. It's basic physics. And I keep my money in my pocket.
@campbellridesbikes536 6 күн бұрын
good thing its not your money mate
@BenExile 24 күн бұрын
Great review of a brilliant bipod. I use mine on everything from 22LR to 300 PRC and can't fault it.
@jcprecisionrifle 24 күн бұрын
@BenExile Yeah, it's very impressive. Really hope they carry the same updates over to the A-TAC for 2025
@sstevens7 26 күн бұрын
Do you see a way one could mount an adjustable bag rider to this chassis?
@jcprecisionrifle 26 күн бұрын
The Vision Chassis already has a built in adjustable bag rider 👍 The new Vision Pro Chassis has even more adjustment available on the bag rider
@sstevens7 26 күн бұрын
@@jcprecisionrifle I know it does but adjustments can’t be made without coming off the rifle. The bag rider I’m talking about can be adjusted with the slightest turn of a knob while never coming off the rifle. It’s made by long shot precision.
@jcprecisionrifle 26 күн бұрын
@@sstevens7 I mean.. it can be adjusted by loosening the nut.. but I'm guessing you're talking about something that is micro adjustable for ELR or F Class.. in which case no. Not unless you want to drill and tap holes in the existing one.
@Capricornconnect Ай бұрын
Definitely turned out great
@jcprecisionrifle Ай бұрын
Thanks 😆 looking forward to getting Part Two of the Bergara review recorded now.
@Capricornconnect Ай бұрын
@@jcprecisionrifle I hit subscribe on you so when you do I definitely check it out
@tar6805 Ай бұрын
Thanks for the info. I am looking into one of these for my build. I tried to find the brass model but it is apparently made of Unobtanium.
@jcprecisionrifle Ай бұрын
Have you reached out to Vision directly on their Socials? They're super helpful guys I'm sure they will be able to tell you when the next run of them is... which country are you in?
@tar6805 Ай бұрын
@@jcprecisionrifle Thanks for reaching out. Am in Canada
@jcprecisionrifle Ай бұрын
@tar6805 GCP Rifle Co in Florida might be you best shout then
@Smatnm Ай бұрын
Looks cracking. I’ve got a .223 slot that I’ve not been able to decide on how to fill it……something like this could sit there very nicely.
@jcprecisionrifle Ай бұрын
Yeah, it's a very pointable little setup. Give Chris a shout at Spartan Refinishing and he'll be able to sort you out. I specifically wanted to go as short as possible on the barrel length but you'd probably get better performance out of a 18 or 20" barrel
@jackalfirearms Ай бұрын
Great stuff buddy! 👌👌
@danishshooterhunter Ай бұрын
It turned out awesome 🔥
@spartanrefinishing376 Ай бұрын
Great video Jamie!!!
@jcprecisionrifle Ай бұрын
Thanks.. plenty more to come as my finger recovers
@ghost101049 Ай бұрын
Great job.
@jcprecisionrifle Ай бұрын
Thanks 😆
@gushlergushler Ай бұрын
Great review, currently looking into the same idea of throwing this in a chassis, ideally one with a folding stock. Not sure which, never having dealt with chassis before. Whole new world to get into and I am a bit lost.
@jcprecisionrifle Ай бұрын
Depending on what you want to use it for and which country you're in will depend on what's available. If you head over to my Instagram, you'll see I've put mine into a Vision Hybrid Chassis available in the UK at Spartan Refinishing. I'll have a video of this coming out soon (I've currently got a hand injury but once that's healed up I've got several videos lined up).
@jamesdailey2476 2 ай бұрын
☠️😂100$
@jcprecisionrifle 2 ай бұрын
Everything is £100
@somebrains5431 2 ай бұрын
Interesting choice to shoot tactical class instead of going with a 6mm.
@jcprecisionrifle 2 ай бұрын
It's more that I choose to shoot Limited Division under IPRF Rules as I don't reload so shooting a division where everyone is shooting Factory Ammo makes sense. If/when I start to reload I'll probably go to a 6/6.5mm cartridge
@fuellifetv2934 2 ай бұрын
Very nice, What ammo are you shooting with? im also shooting .308 my tikka likes 175gr S&B im trying to replicate the load but unsure what powder they use, ive plenty of N140 on the shelf
@jcprecisionrifle 2 ай бұрын
Exactly what I use. 175gr S&B. That having been said, I've just got a new barrel and will be testing for some different ammo to use that's available in the US for the world championships in September
@sparkplug161 2 ай бұрын
You said Remington 700 clone? So every Remington 700 stock ist going to fit with this?? Did I get this right?
@jcprecisionrifle 2 ай бұрын
That is my understanding. Obviously I haven't tried it in every stock or chassis. But I've not heard of a B14 not fitting in a Rem700 footprint.
@jcprecisionrifle 2 ай бұрын
Did you have a specific chassis in mind?
@sparkplug161 2 ай бұрын
Thanks for the answer! No, nothing special - I am only brainstorming. I am looking for an affordable 223 bolt action rifle that is very light and short. What do you think about barrel lenght and velocity? B14 extreme sierra uses a 18" inch barrel.
@jcprecisionrifle 2 ай бұрын
@sparkplug161 the Sierra was also one I considered. Lovely looking stock but as I was going to be going straight to a chassis I decided to go with the Stoke. Velocities from what I've tested as follows: Norma 55gr .223 FMJs - 3056fps avg Norma 69gr .223 Match - 2620fps avg Sako 55gr Gamehead - 2919fps avg Hornady 55gr Varmint Express - 2928fps avg
@sparkplug161 2 ай бұрын
Well, I am looking forward for the stock you gonna choose. I hope you gonna make a video about it then.
@Italianshooter01 2 ай бұрын
Accuracy wise is it performing well?
@jcprecisionrifle 2 ай бұрын
At the moment I can't give a conclusive answer. The rifle is really not fitted to me well and the scope mounted too high to get a proper, repetitive cheek position. I hope to have it out and into a chassis soon and then Part Two will follow with some accuracy testing. BUT.. it does come with the standard Bergara Sub MOA guarantee, so if there was any major issue out the box, I'm sure Bergara would sort it.
@Italianshooter01 2 ай бұрын
@@jcprecisionrifle thank you, i’ve subscribed and i’ll wait for the part 2
@jcprecisionrifle 2 ай бұрын
@@Italianshooter01 thank you 😊
@cliffb.2416 3 ай бұрын
Do you by chance know what ammo bergara designed their 22-250 1:9 barrel twist rate for? I was looking at that Stoke model but got a B14 HMR in 22-250 caliber. 1:9 tweeter rate. I can't get anywhere close to sub MOA groups. Tried numerous store box ammo here in the States. Even started to have a buddy hand load different loads. Lots of time and money already spent and still the best groups I can get at 100yds is maybe 2.5 inches. I'm a shooter. I can't shoot tight groups with other guns. I'm not saying that the group size is 100% the gun/ ammo I tried, but it's not all on me either. I read that it might like 64 to 77gr lead? Amy help will be greatly appreciated. Thanks
@jcprecisionrifle 3 ай бұрын
I don't know about the .22-250 unfortunately. But in my limited testing so far (not in this video) my .223 did seem to like 69gr Norma Gold Targets
@achiles13 2 ай бұрын
Bergara lists the ammo on their website. Also, clean the paint off the aluminum chassis,… these problems should be well documented on the interwebs. I hope you get her shooting well!
@randallwhite9015 22 күн бұрын
My rifle in stoke in 22-250 will do 1" at 100yds. 50gr. Remington HP.
@BenExile 3 ай бұрын
Is the underside of the forend flat enough to fit an ARCA or picatinny rail (similar profile to the HMR)? Or do you think you'd be limited to bipods with a sling stud mount?
@jcprecisionrifle 3 ай бұрын
Good question! So the flat width just infront of the magazine is 1" and that then contours around ½" either side to the edge. The entire stock then narrows towards the front of the rifle down to around ½" of flat surface and 1½" including the contoured edges. So, if you're precise with a drill you could easily mount a short ARCA section towards the magazine for use with a tripod and again if you create an adition fixing point you could get a good length section of picatinny right up to the front of the stock for bipods. Hope that helps
@BenExile 3 ай бұрын
@@jcprecisionrifle Thanks 😁 That's really helpful.
@jackalfirearms 3 ай бұрын
I think you’ve nailed it there buddy! I’ve said before, the Stoke will be the best selling model after the B14R and HMR (which both have a significant headstart) for all the reasons you mentioned! Solid review that!
@jcprecisionrifle 3 ай бұрын
Thanks 😊
@gcprifleco.gulfcoastprecis4277 3 ай бұрын
Nice
@jcprecisionrifle 3 ай бұрын
Thanks.. they're a solid brand 👌 very under rated here in the UK. They seem quite popular out in the US and Australia.
@R5308 4 ай бұрын
Reely, they can't put a better surface at a permanent barricade... did he drop his mag in the mud???
@jcprecisionrifle 4 ай бұрын
Tbf this is a new barricade and there are plans I believe to make improvements to the firing point. Yes I did drop the mag in the mud, bit of mud never hurt anyone.
@gcprifleco.gulfcoastprecis4277 4 ай бұрын
Heck yeah!
@jcprecisionrifle 4 ай бұрын
🤙
@gcprifleco.gulfcoastprecis4277 4 ай бұрын
Nice!
@jcprecisionrifle 4 ай бұрын
Thanks 👌
@dannytreacy6775 4 ай бұрын
Thanks for the info! I see you use a .308, I thought that most prefer 6.5 because there’s less recoil than .308, so it’s easier to see where rounds hit, and so adjust for errors if necessary. Do you find you can do that with the.308? I’m asking because I’m considering which calibre to go for. Thanks!
@jcprecisionrifle 4 ай бұрын
So .308 was a personal choice for me for a few reasons; 1. Availability of Factory ammo (as I don't reload) and 2. It has its own division specifically for using factory ammo, so I don't lose out on any advantages gained from home loading ammo. 6mm variants tend to be the craze at the moment but still alot of 6.5mms out there.
@dannytreacy6775 4 ай бұрын
I see, that makes sense, I do reload so would you say it’s best to go for the 6mm flavours in that case, or is there still a good reason to go for home loaded .308?
@jcprecisionrifle 4 ай бұрын
@@dannytreacy6775 I'd say go for the 6 or 6.5 if you're home loading already.. unless you specifically wanted to compete in Limited Division. Have you already got a Rifle?
@dannytreacy6775 4 ай бұрын
No I haven’t got a rifle yet, so trying to figure out the best calibre. I do PRS in .22 and really like it.
@jcprecisionrifle 4 ай бұрын
@dannytreacy6775 have a chat with a few others that shoot centre fire as well at a .22 match and see what they suggest. I'd have a look at what division you'd like to shoot in as well as it may steer you towards what Rifle you want and therefore what options you have in terms of cartridge.
@dannytreacy6775 4 ай бұрын
Where do most of these shoots take place?
@jcprecisionrifle 4 ай бұрын
So in the UK we have a few places that run matches. The NRA have just started running 1 day matches at Bisley. But by far the best matches are run by PRS UK team over at Pro Shoot in Wales.
@jaegersuisse 4 ай бұрын
Nice run bro!
@jcprecisionrifle 4 ай бұрын
Thanks 👍
@dalebeverton5864 4 ай бұрын
Switch on Jamie aiming at the wrong target 😂
@jcprecisionrifle 4 ай бұрын
😅💡
@rickydowning7557 4 ай бұрын
What are the distances the targets range from on these matches?
@jcprecisionrifle 4 ай бұрын
At Pro Shoot they're from 200-600m 🎯
@martinshaw5150 4 ай бұрын
Solid effort there mate 👌🏼
@jcprecisionrifle 4 ай бұрын
Thanks 🍻
@gcprifleco.gulfcoastprecis4277 4 ай бұрын
❤
@gcprifleco.gulfcoastprecis4277 4 ай бұрын
Well done!
@jcprecisionrifle 4 ай бұрын
Thanks 👍
@danielcribbs7312 4 ай бұрын
Does it lock the pan and tilt at the same time? Or can you not lock the pan?
@jcprecisionrifle 4 ай бұрын
From memory, you can't lock the Pan on the ATAC. You can tighten the Tilt but not lock it. Theyve just released an updated version of the ELR with improved Tilt and Pan looking.. so I'd put money on an updated version of the ATAC coming out next year as Tier One seem to be very good at listening to feedback 👍
@Smatnm 5 ай бұрын
They don’t make one for my rifle (Steyr SSG M1)…..any chance you could have a rough measure up of the vision cheekpiece dimensions, please. Looks fairly similar.
@jcprecisionrifle 5 ай бұрын
My Rifle is now at my Gunsmiths and will be for a few more weeks. However, most of the fit issues will be down to the positioning of the Velcro tabs I'd imagine. I'll do some digging for you
@Smatnm 5 ай бұрын
@@jcprecisionrifle No worries, don’t put yourself out 🙂. I’ll measure mine and contact wiebad….probably the most sensible option. 👍
@jcprecisionrifle 5 ай бұрын
@Smatnm yeah I'm sure if you sent them a message on Socials they would reply. They seem very active on there.
@Whitey3755 5 ай бұрын
Brass would look cool
@jcprecisionrifle 5 ай бұрын
It certainly does. The main question now is do I leave my new barrel and the Vulcan Stainless or do I cerakote black...?
@Whitey3755 5 ай бұрын
@@jcprecisionrifle Cerakote the barrel, leave the brake stainless
@jcprecisionrifle 5 ай бұрын
@@Whitey3755 like it is now then, just with the Proof Competition Barrel instead of the AI Barrel
@Whitey3755 5 ай бұрын
@jcprecisionrifle I think that looks best. My 6 Creed has a stainless barrel and a black MPA brake, which I don't care for much. I may rattle can the barrel black too
@jcprecisionrifle 5 ай бұрын
@Whitey3755 maybe I should.go for an entirely different Cerakote scheme for the World Championships 🤔
@wingding028 5 ай бұрын
what bullets are you shooting?
@jcprecisionrifle 5 ай бұрын
Those are Factory Sellier & Bellot 175gr Match rounds. They have a 175gr SMK I'm led to believe
@gcprifleco.gulfcoastprecis4277 5 ай бұрын
Nice!
@jcprecisionrifle 5 ай бұрын
Thanks guys 😁 hope to be putting in many more stages like this your side of the pond come the World Championships 🤞
@TierOne 5 ай бұрын
Great looking rig. Best of luck this season Jamie.
@jcprecisionrifle 5 ай бұрын
Thanks 🙃
@youdontknowme4334 5 ай бұрын
What is the name of the color? Sweet setup
@jcprecisionrifle 5 ай бұрын
That's Tungsten 👌
@jaegersuisse 6 ай бұрын
Great content Bro!
@jcprecisionrifle 6 ай бұрын
Thanks alot 🍻
@justinf5554 6 ай бұрын
Awesome!
@jcprecisionrifle 6 ай бұрын
Thanks 😊
@justinf5554 6 ай бұрын
well done!
@jcprecisionrifle 4 ай бұрын
thanks 🤙