Did all you did was put a muffler? Anything else? A tip or stock?
@BL4KPANTHERАй бұрын
@@alejandrotudonmanriquez7702 muffler and tip. The original 40 series
@alejandrotudonmanriquez7702Ай бұрын
Everything else is stock in the exhaust system other than the two items you mentioned? And what about interior drone? Im thinking of doing this on my 02 Tahoe but I’m thinking about drone, because we use it for long trips also.
@BL4KPANTHERАй бұрын
@@alejandrotudonmanriquez7702 standard done with exhaust nothing that makes you want to jump out of the truck. I kept it simple. Don’t over think it
@giorgish.2932Ай бұрын
Thank you boss Really useful
@Inyourhideyhole4 ай бұрын
Thanks for the knowledge 😊
@Inyourhideyhole4 ай бұрын
I gotcha, its basically the same thing instead on the outside it's on the inside walls. Been years but still remember for my new driving job thanks 💯❤
@jpsquid50175 ай бұрын
rip
@BL4KPANTHER5 ай бұрын
😂😂😂
@BL4KPANTHER5 ай бұрын
The bike peed oil all over my rv parking for a week but man Rodney was a cool dude. RIP
@lifewithjusto77776 ай бұрын
Lucky it didn’t slide off when you let go lol great video thanks had problems
@BL4KPANTHER6 ай бұрын
Once the wheels rolls off it just plants on the gate
@lifewithjusto77776 ай бұрын
Lucky it didn’t slide off when you let go lol great video thanks had problems
@BL4KPANTHER6 ай бұрын
If it slides to the end of the gate then the pj just falls flat and the freight on pallet no longer moves. Essentially a pancake
@minnil79276 ай бұрын
careful stacking stuff on the xbox you could damage it if you do not allow it to vent
@chuckiebomaye6 ай бұрын
Man yall talk to much on these videos 😂
@BL4KPANTHER6 ай бұрын
Thanks for stopping in
@aveluz457 ай бұрын
Ive seen videos , the person flung while doing this
@BL4KPANTHER7 ай бұрын
Flung?
@walterkersting99227 ай бұрын
With a 12 pallet van fully loaded you’re going to have your pallet jack with the forks pointed toward the front of the vehicle underneath the pallet and you’re going to find that you don’t have room to do a 180 on the lift on some models, so what you do is you go straight out, and have the two wheels of the pallet shock fall off of the lift and from there it doesn’t go anywhere. You then lower the lift and place the pallet where you will. If you can get the next pallet off the truck with the forks toward the back of the vehicle so much the better, but you repeat what you did with the first one until you canget pallets off the truck with the forks of the pallet jack to the back of the truck.
@iamomeed6 ай бұрын
id like a video of this, ive tried it and have almost killed my self with the load falling off
@mjayson306 ай бұрын
Its scary when i was training but it works
@MrRobotboy1238 ай бұрын
if he move them 3 adapters off top of that xbox they gone forever lmaooo
@KBryantMediaLLC8 ай бұрын
FACTS!!!!! 😂~klb~
@BL4KPANTHER8 ай бұрын
It’s a fact lol I have one left
@greatguytravis762310 ай бұрын
Just wondering you take The E course online and get the certificate after you pass the knowledge test is there another knowledge test when you get there or is it just skills test?
@BL4KPANTHER10 ай бұрын
This was an experienced day course. So basically everyone there could ride but just didn’t have their endorsement. Had to provide all of your own gear and yes just skills
@oki_535i10 ай бұрын
The phone app isn't a DB meter, so it wont measure the bass what so ever man. Tjats only measuring the vocals to a certain point.
@stulego110 ай бұрын
Thx!
@luxdip10 ай бұрын
What size straps should you buy?
@BL4KPANTHER10 ай бұрын
sorry im just seeing this....each of my trucks are outfitted with 2 20ft straps 6 16 ft straps and 4 12s
@luxdip10 ай бұрын
@@BL4KPANTHER Cool thank you!🙏🏾
@sainttt10011 ай бұрын
Thanks. Starting a new job. Last job was my first after getting my CDL class B and there was mostly hand truck usage. Not much experience with the lift gate and zero training.... So, thsnks
@MrGunfucius11 ай бұрын
Where is the tamper switch
@BL4KPANTHER11 ай бұрын
It’s the little tab. Black
@howardagnew8471 Жыл бұрын
I recommend using the highest rail that is not above the pallet's height, the reason being that is where the freight on the pallet is going to try to move the most, so its the part of the pallet needing the most restraint.
@Smaug1692 Жыл бұрын
Is there any system/idea to store it without taking up space in the cabin? Leaving it under a pallet is not an option since the wheel collides with the door
@BL4KPANTHER Жыл бұрын
Have you tried to pinwheel the pallets inside to create more space ?
@Smaug1692 Жыл бұрын
@@BL4KPANTHER It's a good idea. I don't remember if there's space enough for that but I will try. thx!
@howardagnew8471 Жыл бұрын
If your truck is so full that there isn't enough room (parking it under a pallet puts it in conflict with the door), there are a couple of options: 1) You could flip the jack up 90° to stand it on the end of the "forks," and walk or slide it down the center between pallets and the handle over the top of a pallet, but DO NOT leave it with the forks down between the rearmost pallets and the door as this will likely cause the jack to lean back onto the door as you drive, which will either jam the door or fall out backward on whomever tries to open the cargo door. This does require hefting the jack, its a bit heavy particularly the handle so be careful to avoid pinch points. 2) Instead of loading all pallets straight (as shown in the video), when loading at the shipper, you can "chimney stack" load the truck if its wide enough. The truck is wide enough if, as in this video, when straight loading there's 20" or so of space between pallets you can walk between down the center when the pallets on either side are touching either wall; if you load pallets straight on but there's no space to walk down the center, then the truck is too narrow. "Chimney stacking" (probably a lot of different terms for this) is when you alternate a straight pallet and the next side-turned. If you have normal pallets with two solid side supports (such as the 2nd pallet loaded in on the left side in BL4K's truck), you can't put two side-turned pallets across from each other -- trying to force such with a power jack will trap the pallets and they can't be unloaded with a pallet jack, so every side-turned pallet will need a straight turned pallet beside it. This will let you fit two extra pallets in a 24' or 26' box truck. If this works out that your very last pallet is side-turned and its not blocked by a straight pallet, you can park the jack under that last side-turned pallet, and it won't interfere with the door since the jack will be toward the center/side. Even if this doesn't happen though, this loading method basically converts some of that extra space you can walk down between pallets into used storage space, so there will be more space between the last pallet and the door (in fact with a truck that normally can fit only 6 pallets, you actually have room for a 7th pallet when chimney stacked, and by the time you're up to a 24' truck that could only hold 10 straight-loaded pallets, you can fit 12 chimney-stacked). The big downside to this is it takes a lot longer to load and unload. 3) If all your pallets are "four-way" pallets (the pallet BL4K moves in this video is an example -- it doesn't have a solid side), you can actually do better than the above by loading all the pallets side-turned since you can jack the pallet from any side, but there are a couple of hiccups; first as we all learn the hard way, when a four-way pallet also has bottom supports (the pallet moved in this video is a good example of this; the rearmost pallet on the right side, by contrast, is one without bottom supports), its easy to mis-position the pallet jack such that when you try to jack up the pallet, you wind up wedging the top of the pallet off of the bottom support, causing damage to the pallet; this will happen when you push the jack all the way in under a pallet from its long side as we are accustomed to putting a jack in all the way normally on its short side which doesn't cause this; you have to feel for when the rear rollers of a jack fall off the bottom support. Trust me, we've all learned this the hard way.
@bunchycarter301 Жыл бұрын
What about when your truck is fully loaded? How do you take off that first pallet? No room to go forward
@BL4KPANTHER Жыл бұрын
You need to extend your lift gate and that will give the 4-6ft to maneuver that pallet
@lifewithjusto77776 ай бұрын
@@BL4KPANTHERextend the lift gate ?
@BL4KPANTHER6 ай бұрын
@@lifewithjusto7777 yes. Like you’re using it as normal
@ScorpionBear_AG Жыл бұрын
What do you do when you have loads that are lower than your lowest etrack? How do you secure it down when its lower than tour etrack?
@BL4KPANTHER Жыл бұрын
If it’s not the only thing on the truck then I box it with other freight. If it is not then I either block and brace or run the strap under the freight and back up the wall
@ScorpionBear_AG Жыл бұрын
@BL4KPANTHER Man I'm having trouble understanding your last sentence. What do you mean block and brace ect? Thanks for your time.
@poptartts Жыл бұрын
Do you remember which flowmaster you had on this?
@BL4KPANTHER Жыл бұрын
Original 40
@theretrosaberguy Жыл бұрын
Thank you bro. And love the shirt. God is good!
@030glennful Жыл бұрын
Question ! Is this with the original cats?
@BL4KPANTHER Жыл бұрын
Yes. No cat removed
@ajamuosborne2227 Жыл бұрын
Thanks good bro I was struggling with these straps I got it now thanks to your simple way of explaining it
@JordensCadet Жыл бұрын
Bro this is such a great idea because this is exactly what I was imagining because it's nice to not have to turn back especially if you're on a naked bike that wind is so insane
@BL4KPANTHER Жыл бұрын
Just make sure to add a toggle switch so it doesn’t drain the battery
@gostfalcon Жыл бұрын
@@BL4KPANTHER do you have a link for the product you recommend?
@BL4KPANTHER Жыл бұрын
@@gostfalcon sorry just seeing this. I ordered it on eBay. I used extreme outdoor tape for mounting it. 4.3 lcd monitor with backup camera for 21 bucks. I switched the camera to 170 degree style bullet for another 17 bucks
@Khalid_Bin_Waleed Жыл бұрын
Couldn’t agree more. God bless Brotha!
@DarkOblideration Жыл бұрын
hank youg. Please control the coughing. Was
@DTHRILLS.DANIEL.THRILLRIDETV Жыл бұрын
Good looking I know how in sprinters but not in a box truck
@johnnyreeseiii8189 Жыл бұрын
Absolutely incorrect.
@BL4KPANTHER Жыл бұрын
lol what
@59plexi Жыл бұрын
theres always a fool out there bro
@CALIGS Жыл бұрын
So watching this and reading your replies over the last couple years, I find that I'm in a slightly different but related scenario, which hopefully has a simple solution as well: I want to use a condenser mic, USB or XLR - doesnt matter to me, as I have both - on a Series X and still stream game audio. With my Astro A40s, a single Chat Link, and a HD60X capture card I can do a basic version but it doesn't sound great due to headset mic. Ideally I'd like to have a single condenser mic be what picks up my voice, for *both* my party *and* my stream, and I'd like the stream to capture game audio for games like Call of Duty so we can hear my team and enemy team. What am I missing in my set up for the most straightforward, streamlined, and hopefully easy set up? Is there a way to do this without a physical pre-amp and/or mixer? I have a PC as well, which I use for the streaming end of things only but if it is the only way to make a solution I'm open to anything.
@BL4KPANTHER Жыл бұрын
If using pc for Xbox I would use gamebar app and run my microphone into my computer. Then I would add a usb pedal and make it hotkey ptt then you would use one microphone with all applications including discord. It would allow the toggle foot in game and you could talk to chat without ever removing your hands from the sticks. I have the elgato pedals and they are a dream for this
@CALIGS Жыл бұрын
@@BL4KPANTHER so fast to respond and clear. I will test this out, subscribed with notifications on, thank you so much.
@CALIGS Жыл бұрын
@@BL4KPANTHER I know you don't upload a lot, but I'll know when you do! Haha
@BL4KPANTHER Жыл бұрын
@@CALIGS yeah i started a business last year and it has swamped me .. I’ve found the pc aspect is just better. If you want the best audio imo I would get a mixer and really dial it in then use 1/4 inch to 1/8 inch out into your pc so it all comes through premixed and clean. You can then open your streaming software and run everything like your music and use the record function. Your playback will be exactly what your stream would hear. So you adjust levels to your liking without going live
@weswilson9781 Жыл бұрын
How do you get game audio?
@BL4KPANTHER Жыл бұрын
The splitter pushes it from the controller. My setup now pushes everything through the mixamp
@GuidoGamin2 жыл бұрын
Hey idk if u ever get on here or not I'm 2 years late on this video but is there anyway u could help me out with how u set tht stuff up lol I'm dumb when I comes to tht stuff and I've wanted ur vod prolly like 40 times
@BL4KPANTHER2 жыл бұрын
What exactly do you need help with? I would say if you’re using a computer nurse the Xbox companion or game bar app
@GuidoGamin2 жыл бұрын
Nurse the app ? Can I use my microphone and in different input use voicemod in voicemeeter banana
@BL4KPANTHER2 жыл бұрын
@@GuidoGamin running into your apps or ??
@GuidoGamin2 жыл бұрын
@@BL4KPANTHER yea like I can have my mic in strip 2. then voicemod in strip 0? Idk wht nurse means im srry lol
@GuidoGamin2 жыл бұрын
@@BL4KPANTHER thts how I have my voicemeeter setup but if I use default input on apps then hear echo wont they
@terrolsolo49502 жыл бұрын
That sound good bro
@erastuskambuale86812 жыл бұрын
Thanks not much detail on how to actually use the pallet jack so plz try more on that next time but was really helpful because it was my first time using a pallet jack. I give a like for this video
@BL4KPANTHER2 жыл бұрын
that's because a pallet jack in general only involves two actions..Up and then Down. squeeze the lever to lower and put the latch in the down position and pump it for it to go up
@erastuskambuale86812 жыл бұрын
@@BL4KPANTHER Thank u and I appreciate u for this it was helpful.
@BL4KPANTHER2 жыл бұрын
@@erastuskambuale8681 anytime...I will do a video on the mechanics of a pallet jack next. That's a good idea
@TheMahdi-legacy2 жыл бұрын
Bro your explanation is very very good but u need someone to help u holding camera to come close to u and show us exactly where u insert the rope and how u manage it because it still not understandable for someone like me...
@BL4KPANTHER2 жыл бұрын
I understand I will have to adjust that on the next video I make
@mcfc25282 жыл бұрын
Is the max weight on a pallet truck easy to move or quite heavy?
@BL4KPANTHER2 жыл бұрын
Height or weight? Height can be light so it depends on how good it is wrapped if it is. If it's a crate it is prone to balance issue like any other tall thing
@mcfc25282 жыл бұрын
@@BL4KPANTHER like let's say you have the heaviest load possible on the pallet jack would that be hard to pull or push
@BL4KPANTHER2 жыл бұрын
@@mcfc2528 I mean. Yeah it's heavy and if it's at capacity of the jack absolutely
@mcfc25282 жыл бұрын
@@BL4KPANTHER ok because you was making it look easy with 1 hand so I thought maybe the pallet jack makes the weight easier to deal with
@BL4KPANTHER2 жыл бұрын
@@mcfc2528 i mean yes it does help but in this case the freight was less than i think 1 pounds so it just glided
@AimeBeats2 жыл бұрын
Do you know what the dimensions are for your lift gate?
@BL4KPANTHER2 жыл бұрын
Each one of mine varies based on the trucks I have. My newer ones are 60x89
@AimeBeats2 жыл бұрын
@@BL4KPANTHER This was very helpful thank you. My lift gate is small & I worry about the freight falling over all the time so I am planning on getting a new one soon!
@BL4KPANTHER2 жыл бұрын
@@AimeBeats glad I could help. The key is centering the freight inside the truck and lowering it on gate as soon as it clears the plate even if by a few inches
@invest_93612 жыл бұрын
Hey man liked your video and subscribed to your channel. Thanks for the info I do have a question for you, wanted to see if you can help? I just bought some good headphones, but they do not have a mic, as well as a DAC and an external yeti blue mic. Trying to figure out how to connect to xbox one x? I can connect my headphones to the DAC, but when it comes to the yeti blue external mic not sure how to do it with out using the headphone jack on the xbox controller. The DAC I bought is Fosi Audio Q4 Headphone Amplifier Mini Stereo DAC 24-Bit 192 KHz USB. I did notice it does not have a separate port for the mic. I have been using the splitter to the DAC and trying to connect it that way, the only problem I'm having is the mic is not working. Can you please help!? This is very hard especially with xbox.
@mdhridoy25332 жыл бұрын
🙏🙏🙏 Why aren't your video views increasing? And not reaching people? The reason is 1. Your video is not being SEO properly 2. Your video is not reaching the right people 3. Not using video hashtags properly 4. Not sharing the video on social media There are a few more reasons. That's why your videos are limited to your channel. Can't get out In a word, your video is awesome. such videos are in great demand. If you do these things correctly. Hopefully you will get a lot of visitors. Feel free to ask me any questions you may have. If i can help a wonderful person like you. Feel lucky. I will cooperate with you in all kinds. I am waiting your reply,,,,,,,,,,,,,,,,,,,,,,,...;'
@BL4KPANTHER2 жыл бұрын
thanks but no thanks
@mdhridoy25332 жыл бұрын
@@BL4KPANTHER whay
@B01G3n1us2 жыл бұрын
7 years later and still the sexiest sound I've ever heard from an SUV
@josh_a.71422 жыл бұрын
The tropo is the 400watt one correct? Not the shallow?
@BL4KPANTHER2 жыл бұрын
This was a shallow box but it was standard for the tropo 8 version 1. I think the 2 is little different
@josh_a.71422 жыл бұрын
@@BL4KPANTHER this box is standard on the Tahoe correct?
@BL4KPANTHER2 жыл бұрын
@@josh_a.7142 yeah the stock one
@josh_a.71422 жыл бұрын
@@BL4KPANTHER do i need to wire an amp kit or is it already wired?
@BL4KPANTHER2 жыл бұрын
@@josh_a.7142 nah you're gonna have to wire a kit, the stock system wouldn't push anything decent
@maxjnb48162 жыл бұрын
It all depends on the weight of the freight. If it's 2,500 lbs of tile flooring, you may not have much control moving towards that gate.
@BL4KPANTHER2 жыл бұрын
That's why people should move slow and be ready to lower that freight right away if it feels like it's getting away. They shouldn't be moving quickly getting freight off or on a liftgate
@maxjnb48162 жыл бұрын
@BL4K PANTHER I agree. However, the greatest and best investment is an electric pallet jack. It makes the job much easier and safer.
@BL4KPANTHER2 жыл бұрын
@@maxjnb4816 but adds a bit too much weight and size to the straight truck where weight and being able to even partial helps keep the bottom line fair. Weight, space and charging keep them from being great additions at the moment. On dedicated routes I could see it though
@helix-blitzninja2 жыл бұрын
hey can the mixer ur using on the side with mix amp there r u able to run a software and use it as a mic and voice change for example can i use fl studio with that mixer and voice change by using the auto tune i have for fl studio with that mixer
@BL4KPANTHER2 жыл бұрын
I do it much differently now. I run from mixer into my pc and use voice mod pro. You can use auto tune etc with that software..now I will say if you run to the mixer/auto tune first then you should be able to easily just run your outs back into this
@helix-blitzninja2 жыл бұрын
@@BL4KPANTHER so it does work right yeah sorry i’m asking bc i might go with this style of mixer i already have goxlr but i kinda wanna add more um volume/mic’s to my goxlr would it work or it can even be on its own so i ask if u can use it the way i told u with the mixer then yeah bc i want the same mixer as yours i might get one later down the line also another question is what mixer is that as well like what’s it called
@BL4KPANTHER2 жыл бұрын
@@helix-blitzninja you use both, just run this mixer into the go xlr as an input that was one is the behringer xenyx 802. They do make a usb version as well.
@helix-blitzninja2 жыл бұрын
@@BL4KPANTHER ight thx man I will try this way down line thx man I own u one bro
@one2dothis2 жыл бұрын
You made it look so easy. Thank you for this video.
@BL4KPANTHER2 жыл бұрын
Glad I could help
@marlanordhenry30692 жыл бұрын
Where do you buy ratchet straps from?
@BL4KPANTHER2 жыл бұрын
@@marlanordhenry3069 I'm sorry I just saw this. But ratchet can be purchased the cheapest on Amazon in all different lengths. My personal opinion is to get 16ft as freight is getting larger and so are pallet builds. So this is a food median of size. Grab maybe 4 twenties as well.
@AngryDirtBiker2 жыл бұрын
Hey PANTHER! cool clip! allowed to use it in compilation? Credited as always you already know! Stay safe
@BL4KPANTHER2 жыл бұрын
Feel free
@francescoluongo69522 жыл бұрын
Hi guys pls help me i ve buyed an tonor tc40 and the adaptor for connect all but it doesnt works can someone help me?
@BL4KPANTHER2 жыл бұрын
To connect to what exactly? It's a USB microphone
@francescoluongo69522 жыл бұрын
Yes its a usb mic but if connect it to my xbox it acts like if he doesnt work but if I connect to my pc he works perfectly today just arrived the splitter for mic and headset but its the same it doesnt work I ve just seen now the page of amz end the descrption says Incompatible with xbox one is for this?
@BL4KPANTHER2 жыл бұрын
@@francescoluongo6952 because Xbox doesn't allow third party microphones directly to their system like the Playstation does. That's why they push you to either console based app or a work around
@francescoluongo69522 жыл бұрын
So Can I use this mic on xbox?
@BL4KPANTHER2 жыл бұрын
@@francescoluongo6952 not without a splitter and feed to the controller