Пікірлер
@kustomaf7606 13 минут бұрын
Turned out great!
@theresa0314 18 сағат бұрын
If I were to do a static lowering kit to have the ride height of black dice can you advise me on that. I have a 64 stepside that I would like to sit at that driving level. Thanks. I am a fan of your work. Started watching about 2 months ago or so. Keep it up. Have anymore simple c10 hats?
@SIMPLE.C10 13 сағат бұрын
I’m out of hats right now. Sorry. To be at the same height as ride height on black dice I would recommend the drop spindles and a 3 inch drop spring and a 5 inch drop spring with a mini notch.
@stopthephilosophicalzombie9017 Күн бұрын
Nothing like putting AC in a vintage truck in the summertime. Best ride home ever.
@SIMPLE.C10 23 сағат бұрын
Yessir!
@stopthephilosophicalzombie9017 Күн бұрын
What does the binary switch do?
@SIMPLE.C10 23 сағат бұрын
Turn off compressor if pressure gets too high or low.
@stopthephilosophicalzombie9017 23 сағат бұрын
@@SIMPLE.C10 Oh ok. Thanks!
@dannysteveson6718 Күн бұрын
Looks awesome wish I did this style instead
@SIMPLE.C10 Күн бұрын
This was a lot harder than the regular style I do lol
@dannysteveson6718 Күн бұрын
@@SIMPLE.C10 are you gonna do that style again on the next truck?
@SIMPLE.C10 Күн бұрын
@@dannysteveson6718 I don’t know yet
@rodneyhaskins7782 2 күн бұрын
What’s the measurement from the back of diff to the back part of links, my fuel cell is back there I want to know if I had enough room for the watts links kit. Thanks
@SIMPLE.C10 2 күн бұрын
@@rodneyhaskins7782 6 inches
@r.s.restorations 2 күн бұрын
Haha! Hair swoopin and posin
@SIMPLE.C10 Күн бұрын
Lol
@octaviushicks2215 2 күн бұрын
What kind of wheels are those???
@SIMPLE.C10 Күн бұрын
Transport wheels
@westonlee9778 2 күн бұрын
What gas line did you run from your gas tank to the engine bay? Rubber or metal? I’ll be reviewing your videos show the air bag system, engine etc for my build. Thanks
@SIMPLE.C10 2 күн бұрын
I used rubber hose with AN fittings. I have multiple videos running fuel lines and a ton of air management system stuff. Dig into the channel! Thanks so much.
@jeffrichied4828 2 күн бұрын
Great job Travis. Turned out awesome! Will you put actuators on it or go with gas struts? I did a very similar set up last year using a lot of Jason’s ideas. I used struts because they were faster to open and close and they are more discrete plus quiet. Keep up the good work.
@SIMPLE.C10 2 күн бұрын
I’ll probably just use struts. I like the idea of actuators but not sure I want to wire everything.
@stephenlea5765 2 күн бұрын
Looks good!
@SIMPLE.C10 2 күн бұрын
Thank you!
@westonlee9778 2 күн бұрын
Awesome sauce great ideas and ending product! I just pulled my 63 C-10 bed today for the Boyd gas tank install. Wish I had the cash for a lowering kit with bags, Catch you later
@SIMPLE.C10 2 күн бұрын
Thanks!
@hanksouthworth9755 3 күн бұрын
I like it Picasso
@SIMPLE.C10 3 күн бұрын
@@hanksouthworth9755 haha thanks!
@SIMPLE.C10 3 күн бұрын
Thanks for watching!
@Jorge3860100 4 күн бұрын
What are the measurements for the metal bar spacing for the wheel. The first three bars. Thanks
@SIMPLE.C10 4 күн бұрын
That will be dependent on your tub placement. You screw the tub to the bars then center the tub to your wheel. Everyone does their tub cut different so I can’t give you an exact measurement.
@Jorge3860100 2 күн бұрын
Ok cool thanks for the clarification.
@raymondtrotter4655 5 күн бұрын
Thanks for the lesson. Fixing to do my 62 BBW FLEETSIDE SHORTBED CUSTOM DELUXE with BB 454 soon. Also im going to start on my 1960 BBW SHORTBED STEPSIDE project with BB 396. Im looking forward to the future cruises with AC also. Thanks. Keep em coming. Truck Driver Ray ✝️
@SIMPLE.C10 5 күн бұрын
@@raymondtrotter4655 thanks for watching
@mrreviewsitall7496 7 күн бұрын
about to put one in my F100. I assume it sounds great right
@SIMPLE.C10 7 күн бұрын
Yea sounds good
@bajafishtaco 7 күн бұрын
That 545 sealent works on aluminum npt fittings and aluminum tank?
@SIMPLE.C10 7 күн бұрын
@@bajafishtaco yes rated for air fuel or other fluids too. Works awesome.
@bajafishtaco 7 күн бұрын
What rims are on that truck? What are they called?
@SIMPLE.C10 7 күн бұрын
Us mag Santa Cruz 22x9
@troybreedlove4195 8 күн бұрын
New Sub. Out of all the endless content I've searched through on how to properly prepare and set up the Watts link for a custom build your the best I've found. I appreciate ya sharing your knowledge Brother. I'll be ordering my Watts link thru your site. C10 💪 Heart Beat of America 🇺🇸
@SIMPLE.C10 7 күн бұрын
Awesome man. Thanks for the encouragement.
@user-nn4zi2jr3p 8 күн бұрын
Thank you for capturing some 🔥🔥 shots of mint2b and all yall do for the c10 scene
@SIMPLE.C10 8 күн бұрын
@@user-nn4zi2jr3p love the truck
@dannysteveson6718 8 күн бұрын
Hey wait a minute I see vintage air in lucky 🍀 already!!
@SIMPLE.C10 8 күн бұрын
Just the vents
@dannysteveson6718 8 күн бұрын
Another great video! I love the EZ clip I use it on all my a/c installations I think it looks better and cleaner more OG oh and there is a cheaper pair of pliers I’ll send you a link
@SIMPLE.C10 7 күн бұрын
Sweet thanks
@blowe1986 8 күн бұрын
Great time as always!!!
@SIMPLE.C10 8 күн бұрын
Yes it was!
@joestlouis69 9 күн бұрын
Went last year but missed this year… didn’t get no noticed .. need next year schedule.
@SIMPLE.C10 9 күн бұрын
Thanks for watching! What do you mean didn’t get a notice? They promoted all year long. Had it on my calendar since December. Make sure you follow their page on Facebook and Instagram. Best show around in my opinion. Hope to see you next year.
@russellchastain841 7 күн бұрын
@@SIMPLE.C10what about people who don't do Facebook? We get left out a lot!
@joestarn356 10 күн бұрын
The link is for a v groove belt, did you have to contact Speedway motors for the serpentine belt compressor?
@SIMPLE.C10 10 күн бұрын
I pieced my set together from vintage air directly. The link I shared is the basic kit for this year model. I already had the serpentine. I would contact vintage air.
@froe31061 11 күн бұрын
Great Video, How is the ride quality with the air bags.
@SIMPLE.C10 11 күн бұрын
@@froe31061 super smooth with this setup.
@joshsbluecollarbuildsdesig7427 11 күн бұрын
Do you have the link to this product?
@SIMPLE.C10 11 күн бұрын
www.speedwaymotors.com/Vintage-Air-Heritage-Series-Underdash-Heat-and-A-C-Kit-Horz-Condenser,267588.html?CSEGoogle&CSE&CSEGOOGLE&gad_source=1&gclid=Cj0KCQjwwO20BhCJARIsAAnTIVTBWXDy__JesuELFF5ZNhgrA8EmZkPW9efW31Mw8ZFpQWW0xbL0wVIaApA-EALw_wcB
@joshsbluecollarbuildsdesig7427 11 күн бұрын
@@SIMPLE.C10 cool thanks. Great video
@cristianh8 11 күн бұрын
I crimped and made my own lines with a master cool crimper and works amazing and it’s not expensive
@SIMPLE.C10 11 күн бұрын
Very cool. I saved money not buying the full kit so I splurged on the ez clip kit.
@kevinstevens9893 12 күн бұрын
Why do you still have the stock ugly yellow oil dip stick?😊
@SIMPLE.C10 12 күн бұрын
@@kevinstevens9893 lol out of all the stuff in the video you point out a dipstick. I like it.
@kevinstevens9893 12 күн бұрын
@@SIMPLE.C10 I love the video but I see it all the time. Just got back from Columbus good guys and it seems like everybody that does on a ls swap.
@bigedmoore9251 12 күн бұрын
Love, simple CT keep it up. Enjoy the show.
@SIMPLE.C10 12 күн бұрын
Thanks
@charlesalves1758 12 күн бұрын
Show 🎉🎉
@SIMPLE.C10 11 күн бұрын
Thanks
@charlesalves1758 12 күн бұрын
Fala comigo
@SIMPLE.C10 12 күн бұрын
Hi!
@charlesalves1758 12 күн бұрын
Show 🎉🎉
@SIMPLE.C10 12 күн бұрын
Thanks
@sru1436 12 күн бұрын
I was thinking of doing the same unit in my 72 C10, this video is perfect timing.
@SIMPLE.C10 12 күн бұрын
Awesome!
@BayWop 13 күн бұрын
Will this system over power 4 3.5” boss speakers? They are 140watts per pair.
@SIMPLE.C10 10 күн бұрын
It will sound good!
@toto14101 15 күн бұрын
Where do I find the golden color motor mounts? I don’t know how they are called hahaha!
@SIMPLE.C10 15 күн бұрын
@@toto14101 they are called dirty dingo engine mounts.
@westonlee9778 15 күн бұрын
Very cool video thanks man
@SIMPLE.C10 15 күн бұрын
No problem thanks for watching
@toto14101 16 күн бұрын
Hello! How could I find the engine mounts that you use?
@SIMPLE.C10 15 күн бұрын
Search dirty dingo slider mounts for your year model. I got mine from az pro performance but many places offer them.
@toto14101 15 күн бұрын
@@SIMPLE.C10 and the golden color ones? Thanks for the reply!!
@leebrown2790 17 күн бұрын
Your garage is awesome
@SIMPLE.C10 17 күн бұрын
@@leebrown2790 thanks a lot!
@leebrown2790 17 күн бұрын
What is the thread size on the hose coming from the compressor
@SIMPLE.C10 15 күн бұрын
3/8npt
@DallasRCracing 17 күн бұрын
Do you remember which u-bolts and blocks you used. I bought the watts kit, tinworks trailing arms from you so I want to use what you use 100%
@SIMPLE.C10 16 күн бұрын
It’s the velaworks rear diy slam kit from my website.
@DallasRCracing 16 күн бұрын
Ok thanks sir. Those blocks look a lot bigger in pic then they do on truck!!
@SIMPLE.C10 16 күн бұрын
@@DallasRCracing you have to cut them down to whatever size you need. If you have tinworks arms you cut them down to 3 inches instead of 4
@DallasRCracing 16 күн бұрын
@@SIMPLE.C10thank you
@DallasRCracing 14 күн бұрын
sorry for all the questions but which hobart welder are you using?
@WilliamMunny-d8s 17 күн бұрын
so a SIRIUS Xm app on phone would be streamable to this thing?
@SIMPLE.C10 15 күн бұрын
Yea. Any sound that comes through your phone will work through Bluetooth.
@ronaldlevingston31 17 күн бұрын
I am trying to figure out if I need the monster notch or not. How do I know what size notch I need? I am trying to run 20 inch rims. And put in a air ride. What is best for me? I am working on a 1972 chevy c10 stepside truck. I am wanting to use my factory trailing arm's.
@SIMPLE.C10 17 күн бұрын
@@ronaldlevingston31 it depends on how low You want to go. With a mini notch you’re not going to get the truck close to the ground. I’ve mini notched a few and regretted it. I wished I had laid it out.
@ronaldlevingston31 16 күн бұрын
I am wanting to laid it all the way out. And I see some tucks when they are laid out the front tires on some trucks the top of the be leaning in. What will stop that from happening?
@SIMPLE.C10 16 күн бұрын
@@ronaldlevingston31 most bagged vehicles will have some front wheel camber when fully aired out. You can fix that with an aftermarket drop member but those are expensive. Mine have slight camber but doesn’t look bad.
@ronaldlevingston31 16 күн бұрын
@SIMPLE.C10 ok thanks. When I start on my truck this winter. I will be order from your site.
@SIMPLE.C10 16 күн бұрын
@@ronaldlevingston31 thank you
@chuys53chevytruck60 17 күн бұрын
Had to come bk and look at your video im about to cut min out with your temple i got from you so ican put my transport wheels on 💯🙌
@SIMPLE.C10 17 күн бұрын
@@chuys53chevytruck60 awesome
@franksgarage8551 18 күн бұрын
Coated headers not reccomended for break in. Beautiful truck.
@SIMPLE.C10 18 күн бұрын
@@franksgarage8551 noted! Thank you!
@dannysteveson6718 19 күн бұрын
Man wish i would of seen this before i started messing with my double din situation
@dannysteveson6718 19 күн бұрын
Have you thought about using rivnuts to hold the speakers in?
@SIMPLE.C10 19 күн бұрын
@@dannysteveson6718 now that I do a lot of rivnut stuff I would. Back in the day I didn’t use that much.
@dannysteveson6718 18 күн бұрын
@@SIMPLE.C10 well either way still came out great
@dannysteveson6718 19 күн бұрын
Nice 👍 just bought some of these and did just about the same thing!
@SIMPLE.C10 15 күн бұрын
Awesome
@Z63Chevy 19 күн бұрын
Do you know of any parts places that I might find a decent pair of doors for a 1963 c10?
@SIMPLE.C10 15 күн бұрын
I’ve never bought doors but AMD is a good choice but depends on who you ask.
@Z63Chevy 14 күн бұрын
@@SIMPLE.C10 Thanks, they don’t make them for the 60-63.