Gobsmacked this is done with a brush, have you a list of paint used ?
@bikepony349814 сағат бұрын
Subscribed liked and commented
@whittaker00721 сағат бұрын
Awesome tips 👍
@user-zd1eg2jg6iКүн бұрын
Hi thank you for your great content, I’ve learnt a lot but also just enjoy watching the model come to life while you are painting it. Can I ask should you fill in drain holes if they are not seen (on joints) I’ve seen info on how to but not if you should or need not, all the best glenn
@TheCreativeCollectorКүн бұрын
Not really necessary since they're not going to be seen.
@Rafaels3DPrintLabКүн бұрын
he say "Raf" and i show up...even I'm to late 😅
@Erick-gx8quКүн бұрын
What pads are you using for the gtool?
@TheCreativeCollectorКүн бұрын
There's a variety pack that's sold seperate with it
@JohnOdemКүн бұрын
That's BADASS..!!!!!
@nikgridКүн бұрын
Great vid Henry! I'd love to see a video on airbrushing zenithal highlight...how much is too much am I spraying too little...that sort of thing.
@diyfirekingКүн бұрын
Great video for today 👍👍
@TheCreativeCollectorКүн бұрын
Thanks 👍
@genemaster74Күн бұрын
G'day m8.....im a noob and just watching for the learning......Cheers from A M8 Downunder🙃
@brentcox6201Күн бұрын
Ok, I love the hat
@charlesforbin6937Күн бұрын
INKT-DINKY........RIIIIIIIGHT (DR. EVIL). Haaaaaaaaaaaaaaaaaa! GREAT VID CC.
@fabianollinares3026Күн бұрын
Just a little tip, still on Chitubox, if you make the hole first while the piece is still solid, and only then leave the piece hollow, you will have a support wall for the magnet, making it easier to apply to the piece.
@TheCreativeCollectorКүн бұрын
Thanks for the info!
@scottdecleene6071Күн бұрын
Well done. Thank you, I've been waiting on this one.
@lucianovitorio836Күн бұрын
GREAT! SIDE SHOW DO LIKE THIS??
@bigboi712 күн бұрын
Good stuff!
@fluxcapacitor2 күн бұрын
One more advanced way is to design a depressed 'basin' the diameter of you magnet in your CAD software before the slicer (say, 8 mm), then with the slicer poke a hole in it which is smaller in diameter (e.g. 6 mm) so that you end up with a circular depressed lip (1mm wide) all around the hole, that firmly fits and holds your magnet (I am speaking with the head upside down of course)
@peterclegg26092 күн бұрын
Damn Hank really do love the channel, quality 😊
@javoner2 күн бұрын
School is in thanks for all the knowledge… keep it coming will watch.
@aberodriguez41492 күн бұрын
Impressive something to help improve your display pieces. 👍👍👍
@stephenoran20192 күн бұрын
Excellent work, as usual, sir!
@ChrisVeveReise2 күн бұрын
Lovely to see someone showing so much respect and empathy for artists! Dripping for respect! Thank you!
@IAmWBeard2 күн бұрын
You should have only done the yellow a little coming out the eyes ,then heavily on the outer most part. Now It looks like a ketchup and mustard fight from start to finish.
@TheCreativeCollector2 күн бұрын
I've upgraded a lot since then so I may do another video soon.
@Desmo9042 күн бұрын
Have you been looking at my workbench recently? I was literally doing magnets last night and having the issue with them falling in! The Q-tip trick is genius. I'll certainly be looking into doing that. I really wish Citubox, or Lychee would have a facility to make indented cylinders. That way you could make a capped hole the exact size you need for magnets. (Maybe one day) Thanks Henry! (Great hat btw) 👍
@upstatescalemodeling2 күн бұрын
Great helpful video Henry. What size magnets do you have. I didn't see the link for them :o)
@TheCreativeCollector2 күн бұрын
I mainly use 5mm but I have different sizes. I'll double check on the links but I thought I put them in the store
@RDJ_Customs2 күн бұрын
Digging the hat dude 🙌🏽
@sierradesigns20122 күн бұрын
Amazing video as always, would you mind doing a review video of the Phrozen RPG resin which is flexible.
@TheCreativeCollector2 күн бұрын
Great suggestion!
@sierradesigns2012Күн бұрын
@@TheCreativeCollector would love to watch it!!!
@arcort6692 күн бұрын
I know this is not part of your video.i see you like the punisher.have you painted a 3d print using Tim bradsetreet style black and white?
@TheCreativeCollector2 күн бұрын
I have not but I'm wanting to commission a Bradstreet style Punisher.
@arcort6692 күн бұрын
Awesome hat!!!!
@AsheCraftingCorner2 күн бұрын
But legit question..How do magnets work?
@TheCreativeCollector2 күн бұрын
They hold your parts together
@aberodriguez41492 күн бұрын
Like Henry said they hold your parts together but if you do not pay attention to the polarity they can also repel your parts from each other. 😮
@askiagomez55702 күн бұрын
Do your models come pre-supported?
@TheCreativeCollector2 күн бұрын
No
@tyronebrewer32192 күн бұрын
Great little cheats!
@RL-lm3ed2 күн бұрын
Thank you sir, just the info I was looking for, cool Hat by the way🤘you can start your band up again with it being you have no hair to thrash around anymore😜
@Lurker12222 күн бұрын
This is honestly one of the best videos you’ve done. Thanks for everything you do for the community!!
@carolinacorro25292 күн бұрын
Hi! I love your channel. I am new at resin 3d printing and i have applied your settings, compared to default settings (elegoo saturn 3 ultra), the printing time rises 100% (from 3 to 6 hours) is that correct? Or i am missing something? Thanks in advance
@TheCreativeCollector2 күн бұрын
That's normal on some printers. You can increase the lift speed if you want but I'm not too much worried about how fast it prints. These settings are for quality rather than speed.
@markmcguire69842 күн бұрын
Nice one Henry 👍
@TheCreativeCollector2 күн бұрын
Thanks Mark.
@darrellhood54302 күн бұрын
Any suggestions on how to paint fishnets on a print? Everytime I try it, it just covers the skin tone and ends up looking like a solid stocking🤬
@TheCreativeCollector2 күн бұрын
Try light dusting it with pastels with a makeup brush over the raised surface.
@peterclegg26092 күн бұрын
Just had a thought whatever happened to the thin curing lights you could fit into the drain holes to cure inside thoroughly.
@TimmJKD19732 күн бұрын
great hat! 🎩
@yorosbizarreadventure92522 күн бұрын
Premier !!!! 😂❤
@stringztoo2 күн бұрын
As a printer and printer myself, I'd love for you to make this video from the perspective of the artist.
@adriant16542 күн бұрын
We need one in your Patreon
@gregorywesthaver84182 күн бұрын
My birthday is coming soon. I would love to buy myself this hat
@jeramy77m3 күн бұрын
I know this video is a year old, but I am doing a Gambit statue. While following your video I set the hollow with the grid 3d. I did use the slide bar to see if any supports were being generated in the model and there were. My version of chitubox looks newer than the version you are using in this video. So is there a setting I am missing? or do I just go in and remove the unwanted supports?
@TheCreativeCollector3 күн бұрын
From what I hear the newer versions of Chitubox puts supports in there so you can remove them if you want. I use version 1.9.5.
@megaprimemaster3 күн бұрын
a light model has more survivability when it falls.