Thanks!

6g is marked on the package and tin, an impulse buy without reading products details is a skill issue

Good work 🍻

i use the cheap ziplock bags as freezer bags? i put the the cheap plastic grocery bags over the cheap ziplock bags i put a note one the bag and knot the bag the regular freezer bags are double the price of the regular bags i freeze my leftover crock pot food in a freezer bag and do the same thing with a note on the bags with the date the the cheap plastic grocery bags to cover my leftover plate of food and knot the bag at the end of the bag. The the cheap plastic grocery bags to cover my cut watermelon or cantaloupe the cheap plastic grocery bags for a broken candy Ziplock bags bags double bag knotted end of bag wheelchair larry

i pressed the pump on there better and it stopped leaking, but then when i pressed the button it sprayed the windshield but started leaking again. You think its the grommet gasket thing seated in the reservoir?

I dont give a shit that you had the sniffles, good diy lift pump replacement video.

I was able to finally repair the throttle lock/operator presence lever on my 390XP. After watching your video and various other videos (two more I believe) and reading the official Husqvarna workshop manual, I gave it a try. The problem I was having was connecting the spring to the trigger, I was overthinking the darn (@#$%Q) thing. The spring portion that goes to the trigger has a hook at the end, and it was my understanding that it had to hook into/onto something. In the end all I did was place the end of the spring on top of the trigger rail, and pushed it forward. I found this out by mistake as I was giving up and it worked! On the successful try, I had the lever installed in under 30 seconds. Now I have to repair my broken throttle lock on my 372XP, which doesn't have a window in the hand grip. There is no way I could have repaired this without the window. Thank you for providing this video, I could not have repaired the saw without it.

You tell them to keep it away from their skin, but absolutely do not get it in your eyes. Or you will be blinded.

Cool video. However if you want to compare your powder to Triple 7 or any other type of powder you need to shoot it. How much velocity do you get from a given charge with the same rifle, patch and ball? That's the real test.

Are u able to measure the threads size and pitch. I have one of the first ones they’ve made and need parts but they only have parts for this version and newer and don’t put any specs on the website. That would be a HUGE help to me

Good video man, thanks for the info!

I'm here in saskatchewan as well and teaching myself mechanics. I've recently done my sway bars and now I'm learning how to remove the water pump. What a shit show of engineering on the 2004 chev impala let me tell you. I've tried removing the ps pully but had no luck. Now I see there's an easier method. Thank you! I will try this later tonight

yellow bottle = MAPP Gas. Blue bottle = Propane

You don't need to add sugar or anything?

Look amazing too you wanted tsskk h

My F501 started surging at low rpms and would barely idle. I tried this and it worked great, runs like new again, thanks! (Only thing I would recommend is taking off the airbox to get at the jet easier)

Yeah I’m trying to do the same thing with my how did you get around it. I’m pissed only be 10 months

Hi everyone, does anyone knows what might be the cause of this? I got a propane torch and a 20 libs gas tank, I used for few times and it worked perfect, I tried again to use it and it has a very weak flame now. I tried with a 2 libs propane tank and it works perfect. The 20 libs propane tank worked in the beginning and it still nearly full tank, is not empty or anything like that.

Great thanks

Thank you for this video, my son left his ziplock v 110 sealer at my home, I wasnt interested untill today. I found your video had to watch it three times mostly because I kept walking away and not paying attention. 🙄 Finally sat down to watch full video, its so simple, thank you! Now I can vacuum seal all my bulk buys using regular freezer bags, because yes, the sealing bags are expensive. Thank you again and yes I subscribed.

Ok 👌, thanks brother

MAP gas almost always does this to my torches. I hate using it for this reason and mostly stick to the propane to avoid this problem. But the other day, I needed a hotter flame, and after I got done sure enough, it's clogged again...

Thank you for the video. My 18yo Columbia has 58k original miles and I spent an hour and a half plus a half a can of PB blaster and my engine brake never worked so good. I think it was stuck from day 1

Thank you for sharing this. I am about the start this exact repair.

Thank you for the info!!

8 inch crane fruehoff asbest free liner ferrodo maybe 3 rivet corner stainless rivet.

So as you accelerate that flap should move? I have a mbe 4000 in a sterling and when I accelerate a check engine light comes on and if it stays on my engine brake and my engine fan stop working. Was your issue similar?

This video is awesome. I have this problem and this is the only video i could find of the same tip that it is. Thank you so much

Mine acts the same way my husband replaced all the gears like you did in your other video and it still doesn’t work so good I’m disappointed in myself for buying one

Thenx 4 the lesson bro

Great video. Ten minutes, both headlights were replaced. Thank you.

Thanks for the video, really helped me when i got stuck with an uncooperative torch

The torque sheet on the trailer says 300 max why did you do 500

On that part where you could barely see the orifice - that little orifice part will come off and there's a tiny metal filter inside the orifice.

The bulb size is H13?

That’s a good tip scoring the old seal to get it off easier. Thanks for your knowledge

Thanks for sharing Brother .

Donde puedo localizarlos

I have a 98 Cad DeVille the mechanic replaced the casing and the gascats and the oil still leaks.

But what can be done to fix it

What willow species is that? There are so many different trees called "willow."

Ray, I can't thank you enough for your prompt reply to my email. Your video was incredibly helpful in identifying the problem I was facing. I'm now on my way to ordering the necessary part, and I'm feeling confident about resolving the issue, all thanks to your guidance. I'll be sure to circle back and share the results once everything's sorted out. Your assistance has been invaluable!

WD-40 cans are the absolute worst. I have thrown out so many ounces of product due to their faulty design. You have helped me so much! Thank you!!

I can't make my garmin do half of what you're showing. It definitely doesn't display my lure or weight like you've shown. What are your settings?

Oh man I had to use one of these as a kid replacing the knives on our swather! My dad pulled the whole bar one time and I had to help him get it back in.. The blade got stuck on the way in and I saw where it was sticking.. So I pushed on it with my middle finger thinking I could pull it away quickly enough.. Nope! Those knives are extremely sharp and had my finger went further it would have chopped it right off! I got lucky and just got a deep cut.. The moral of the story being.. Find the stem of a tumble weed to do the pushing.. NOT YOUR FINGER!

Where does the battery ground wire on them winches

Thanks for the info.,but why do you need the blue strip at all? The bag is sealed all across, even where there is no blue strip.

There is nothing to compare, black powder and triple 7 are different compositions, triple 7 is nitrocelulose powder and it’s fast when coffined. Real black powder speed isn’t boosted by closing it. If you want to compare your homemade BP, you should burn goex instead, and I’ll assure you that your black powder is quite slow.

Very cool. Going to have to make me some!

Thx for a handy and quick video. Save my bacon. Much appreciation from cold Alberta.