How am I suppose to install Q3 and 4? I scratched up the to beams and have been unsuccessful. Makes no sense..
@duanejensen9898 күн бұрын
These video instructions for the doors & the lock do not match the parts I received in mine. The paper instructions aren't the best, & this video doesn't help much either. I ended up having to drill new holes for some of the roof trim because no matter what I did, they would not line up properly.
@OnslowPalpatine15 күн бұрын
Worst company to deal with, nearly impossible to get a hold of, missing parts, terrible instructions. Wish I could get a refund on this crappy product. Don't ever buy from them.
@seanmiller29218 күн бұрын
Shitty Greenhouse do not buy! Polycarbonate pieces do not fit properly roof design is garbage. You will have to silicone the entire thing once complete or its not weatherproof. VERY DISAPPOINTING, Do better China it's not even 6'x 10...
@DonTheDjungelskog20 күн бұрын
How much snow can it handle?
@dukemanvillle20 күн бұрын
Good video.. what is the make and model of this one.. I installed a 10 x 8 that looks like the exact same instructions and parts as yours. I noticed that every time I roll it it up the fabric starts to bunch up in the center of the roller. Does your do the same?
@conwayconway217721 күн бұрын
Thank you.
@abdulriaz7049Ай бұрын
Roof is a nightmare and manual is sucks and videos is nuts
@abdulriaz7049Ай бұрын
Not easy manual is not well explained
@channel_surferАй бұрын
My us3 does not have holes in it for the screws. How do I secure the walls at the top???
@KyleisnotuАй бұрын
Cheap Chinese garbage I wasted my money on this and the holes don’t even line up. The thing sways in 5 mile winds don’t waste your money.
@JamieHaller-wt4jdАй бұрын
What was the very last step. The #8 bolts were coming up from the bottom?
@mariahenderson633Ай бұрын
Thanks
@AlbertoRodriguez-nd8di2 ай бұрын
That single upper roof metal bracket thats combined of 6 metal long brackets is the worst design and very tedious to assemble. Instructions are bad for that stage of the assembly bc wholes either are alligned for the roof panels or they are absent and are underneath on the other side. Thats me meticulously looking at the Instructions. Other than that its a very nice product
@Drivermodjay3 ай бұрын
What size drill bit you need to use for this? Doesn’t say in instructions
@Royal_Shorts.Ай бұрын
1/2 works
@momoney4re3 ай бұрын
I'm having trouble lining up the middle brace so that it can receive the roof screw
@pkwithmeplease4 ай бұрын
Sorry but if its still the same Chinese weak metal than don't buy it.
@anthonypaskitti58043 ай бұрын
Parts p & Q are dogshit
@ibakethangs3656Ай бұрын
@@anthonypaskitti5804 mannnnnnnnnnn I read you comment before I put it together and you sir are right FUUUUUUUUUUUCK p n q
@DesertWildcat5204 ай бұрын
A more important question how the hell do you remove the plastic film easily?
@pkwithmeplease5 ай бұрын
Dont buy this cheap Chinese shit.
@goldilocksfh77445 ай бұрын
I’ve a feeling when I assemble mine, the music won’t be playing & there’ll be a lot of expletives!
@mikejames44676 ай бұрын
Yea mine is a little off with the opening window
@cydneydowning7372 ай бұрын
Mine too. Did you ever find a fix for it?
@woodsniffer74496 ай бұрын
Thank you it smelled great
@darrylbailey35986 ай бұрын
The worst instruction ever
@gerardoramirez1156 ай бұрын
how do you anchor the shed to the ground?
@davidnaydo7 ай бұрын
When installing the side wall frame it’s hanging in the middle and not staying up itself after install. Any common issues that might be causing this?
@erval97 ай бұрын
How do you anchor to concrete slab?
@erval97 ай бұрын
How does it get anchored to concrete slab?
@AlbertoRodriguez-nd8di3 ай бұрын
You can use wood. Just depends what heavy equipment your planning to store in there
@ralphgoldsborough43928 ай бұрын
This is the worse
@pkwithmeplease9 ай бұрын
bro... thank you for making this omg. you have no clue how much this helps
@chelseacoleman91629 ай бұрын
Can you do a video on assembling your metal 3 seat convertible swing?
@johnfreeman19429 ай бұрын
I just bought this shed, it should be coming in about 2 weeks. I'm looking at this video and I'm wondering how in the world am I going to get the screws in the top portion of the roof?
@tinahaines849110 ай бұрын
Your instructions to assemble are not goid there terrible I wasted 1 hour trying to get help all your website is for buying more products you don't even have a model number for reference all videos that are available are for different type of hutch I had to go to Amazon to get information to search for help I'm stuck I wasted my morning and I don't know anymore about assembling this hutch can you stop trying to sell me more stuff and actually help me with what I already bought I'm very disappointed with your customer service
@Culled10 ай бұрын
Thanks for making this. I’m putting it together tomorrow and this helps a lot
@pratheekmichael3 ай бұрын
Any negative review about this ?
@andrewscopino786410 ай бұрын
Half of this shed doesn’t have the correct holes and is extremely flimsy without extra wood to stiffen it up. It’s cheap quality with an expensive price.
@SteRhythm10 ай бұрын
I’m also finding that the holes are missing in some spots. I guess I have to get some self tapping screws 🙄
@erval96 ай бұрын
I bought the 8x10 size off a discount furniture store for $225 but as I started assembling it, I noticed that the bottom base where the door goes is on the 8ft side and not on the 10ft side like it shows on the manual and in the video. So essentially all the holes are on the opposite side and me following the instructions is useless. The corner walls don’t match with the ones on the bottom because the diagram’s orientation is different than the actual assembly. I’m getting headaches thinking how I’m going to adjust it and hopefully by switching orientation it doesn’t give me complications with other pieces. I can’t return or else I would. What a nightmare
@francisgaddis1224 Жыл бұрын
You sent me the wrong side panels and roof panels.I need the right ones.
@ArashiRiu Жыл бұрын
Cool
@Konabish Жыл бұрын
Hadn't bought one. Watching this, I feel I'm too old to do all this. I was wondering why it doesn't arrive fully assembled, with only the building brackets to install. It seemed to be priced right.
@petel5894 Жыл бұрын
I would like to know if the door could be put on the ( installed ) on the other side??? Of this lean to shed that Is 4 x 8
@homegrownbrews Жыл бұрын
how do u get the screws in on the roof without getting on the roof?
@seannyb734 ай бұрын
ladder
@scubadiverstt Жыл бұрын
Does this have to be anchored to a concrete pad?
@erval96 ай бұрын
I have this question too. I definitely have to because I live in a high wind area. My question is should I do it before assembling everything or after. Is it easy to move/slide and adjust once it’s done and fully assembled?
@rjwlkr6 ай бұрын
I am currently quoting a 14x10 concrete pad myself. Might do it myself. Not sure yet. Did you get yours up? What is your pad structure?
@LilLoo2264 ай бұрын
Not necessarily. It needs a foundation, but it can be wood, concrete block or some sort of paver. We anchored ours to a level wood foundation with a few rebar footers into the ground -- nothing fancy. If you're in a windy area or at risk for high-wind storms, the shed should be anchored to something. You can even anchor the shed itself to the ground with a cable system.
@LilLoo2264 ай бұрын
@@rjwlkr We used a level wood foundation with 3/4" plywood floors. The foundation frame structure is on Tuffblocks and is anchored by a few rebar pieces into the ground, then the shed is mounted to the foundation. Works well for us.
@thereanimator6072 Жыл бұрын
I found the printed instructions somewhat confusing, but this video helped me assemble the awning with no issues. Looks well made, thank you!
@theCondor313 Жыл бұрын
How do you bolt down the base to a wooden frame that I set up for it? I don't see any holes for this.
@richardcook8968 Жыл бұрын
😢🎉😂
@bobburns2012 Жыл бұрын
Proper installation of sides
@Nosferatu1022 Жыл бұрын
Is there a full instruction manual available?
@terrym6525 Жыл бұрын
Which box do you open first ?
@TommyStarks710 ай бұрын
Exactly!
@AlbertoRodriguez-nd8di2 ай бұрын
The small one , or skinny one. It has all the screws and instructions
@martinjcamp Жыл бұрын
Helped us build it. Thanks.
@martinjcamp Жыл бұрын
Helpful. Thanks much.
@chapstyleusa476 Жыл бұрын
Nice! Thank you! Is there any surface leveling or 2 by 4 perimeter required?