J_Spark Garage

Пікірлер

@alexmoran2460 5 күн бұрын

Subscribed. 👍🏼

@FADI_Italy 19 күн бұрын

Hello.... thank you for the useful video, but I got a question, I replaced my car Transmission Conductor Plate NAG1 for 2007 Chrysler 300C 5.7l AWD, it works then not shifting, they told me your Transmission need programming to work correct, someone else told me it doesn't need programming, so I got confused does it need Programming as you a professional??? Cuz am afraid to pay money for programming then if it doesn't work then you waste the money for nothing. Thank you

@Rickyboy2000 20 күн бұрын

Yo I got a 2009 chrysler 300c and I don't plan on doing a flush right now just changing it it's a 5.7 hemi I'm about to get 6 quarts of tranny fluid but was wondering what would be a proper amount

@PaulSteinberg-il4tw 23 күн бұрын

Good job I've got an 07 Charger RT AWD with Procharger as well. 260000km so far so good,

@charlespaluha1247 25 күн бұрын

If you bought a snap on epic you put everything in your entire garage inside of that toolbox

@leescales5216 Ай бұрын

Hey, bought a Craftsman stack identical to yours back in 1984 or so. it was packed with stuff! Finally retired and moved to a house with a bigger garage a couple of years ago and bought a 52" Craftsman stack. Big difference! Love your video, really good production, and a lot of good tips!

@alexisresendiz7582 Ай бұрын

What camera do you use to record? the video and the quality came out great

@JSparkGarage Ай бұрын

Main Camera is the DJI Pocket 3 creators combo and timelapse is with a GoPro 7.

@Drift_lux Ай бұрын

Shit tools

@OneReferralAway Ай бұрын

Great video

@marko11kram Ай бұрын

great tour

@JSparkGarage Ай бұрын

Thanks.

@vickiswor5870 Ай бұрын

Wrench organizer is the Wrench Pro by Ernst!

@JSparkGarage Ай бұрын

Thanks @vickiswor5870. I realized I said the wrong name. I've added the link to the website in the description.

@Basement_CNC 21 күн бұрын

@@JSparkGarage how much is the toolbox.....im in europe, and we dont get anything this big without spending several thousand euros

@freedomvan2970 Ай бұрын

Great video man!!! GO DAWGS!! It's great...to be..a gater hater!

@JSparkGarage Ай бұрын

Good eye........ Go Gators!

@johnnyramirez9082 Ай бұрын

Can you tell me again what brand of wrench organizers you used again? Thank you

@JSparkGarage Ай бұрын

Search for the following on Amazon. "Ernst Manufacturing 5401M Magnetic Wrench Pro Wrench Storage for 20 Wrenches - Black" That should take you to what I used.

@johnnyramirez9082 Ай бұрын

@@JSparkGarage thank you

@LuisLopez-xk2do Ай бұрын

Holy smokes both are really nice if you plan on selling that craftsman lmk. I wish I even had something like that. Good luck and good health.

@bobfarley4102 Ай бұрын

Why would I take advice about organization from a guy who's prior tool box looked like a cyclone hit it? Your solution is to buy new tools and a giant tool cabinet. That's like buying a new car because the car you have needs new tires.

@hachi-rokuperformancegroup3987 Ай бұрын

Well what are you supposed to do? Buy new tires?

@JSparkGarage Ай бұрын

Well that's a good question. Sometimes it's nice to buy a new car and start fresh.

@louisperich6678 Ай бұрын

Not really. It’s more like you finally break down and buy a minivan because you have 3 kids and are expecting a fourth, your compact coupe doesn’t cut it anymore and you’ve tried to make do with it for too long. The lesson for me as a DIYer is to not wait too long since overstuffing a too-small storage solution no matter has clever you are, inherently leads past a certain point to disorganization. You could always stop buying tools, but who wants to do that LOL!

@JSparkGarage Ай бұрын

100% agree!

@moo7137 Ай бұрын

@bobfarley4102 why are you hating? Man improved his life. New tools, new toolbox what's not to like?

@callofgeorge Ай бұрын

the irony. i have that exact same craftsman toolbox. i just bought a 72" US General to finally replace it. downside, it doesn't fit in my shop.. sooooo currently extending my shop lol.

@JSparkGarage Ай бұрын

Wish I could expand the garage. I’m currently looking for land to build on.

@callofgeorge Ай бұрын

@@JSparkGarage that was the first idea, then realized my pockets aren't that deep. so knocking out the back wall of my shop and adding 8' to it. have a mill and lathe i wanna hookup and use lol.

@zooker7507 2 ай бұрын

you should always do a pressure test with nitrogen to verify there is no leaks. It should hold the pressure for 20 minutes. Also, a miron gauge is helpful because you will know if there is a leak if you can't get below 1000 microns. You should pull below 500 microns if the system is properly sealed. Good job!

@ReeceM69 2 ай бұрын

Did you have to use the weblink cable as well?

@JSparkGarage 2 ай бұрын

Nope, When I purchased it the seller asked for the make and model of the car and pre-programmed it for me.

@ReeceM69 2 ай бұрын

@@JSparkGarage Mann that’s nice of them, I got mine installed and have to wait for the dang cable

@Pol-frost 2 ай бұрын

Good job

@marcotena4158 3 ай бұрын

hi there. i just bought this exact same kit and was wondering what wire did you cut from the harness? mine didnt come with no instructions nor programing steps.

@GNXClone 3 ай бұрын

I had the same thing happen in my SL65. Was told it was due to a converter clutch failure. The fluid looked like it had coffee grounds in it. Changed the filter and fluid and it worked again, but I decided to get a new torque converter anyway.

@iPrinceKw 3 ай бұрын

Is it completely plug & play? Which model is your car?

@JSparkGarage 3 ай бұрын

For the most part. It uses a harness that gets plugged inline with 1 ignition plug. The only part that doesn't make it a 100% plug and play module are the 2 wires you have to splice into the 2nd ignition harness.

@JSparkGarage 3 ай бұрын

And I installed it on my 2007 Chrysler 300c SRT8

@iPrinceKw 3 ай бұрын

@@JSparkGarage Thank you so much for your reply 🫶🏼.

@guadalupedavila2108 3 ай бұрын

Where can I buy the kit for the remote start can somebody share the link

@JSparkGarage 3 ай бұрын

I bought it of ebay. Here's a link but please make sure it's the right fit for your year and model. www.ebay.com/itm/184715074638?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=gBTj4TBzTmm&sssrc=2047675&ssuid=drVB3EUrRQ-&widget_ver=artemis&media=COPY

@marcotena4158 3 ай бұрын

been wanting remote start on my 05 C. do you happen to have the link to this kit?

@JSparkGarage 3 ай бұрын

@marcotena4158 3 ай бұрын

@@JSparkGarage i sure hope that the one i oredered will work as well. i got a different one. same company just looks different i guess.

@miguelgonzalez6424 3 ай бұрын

I bought PCM from flagship it's been giving hell it's stalling it's my 2 one from them , you know we're I can get a good PCM? I'm also going to do rear polyurethane arm bushings.

@JSparkGarage 3 ай бұрын

I can't help you with the PCM question. Sorry :(

@carkid3025 3 ай бұрын

Flagship has a lifetime warranty send it back I just ordered one from them waiting for it to get here now

@TheGuifarroFamily 2 ай бұрын

Flashmasters from ohio

@lilzywer8421 3 ай бұрын

Hey I was wondering what wires did you wire up the purple and white and yellow wire to on the harness of the first plug ?

@JSparkGarage 3 ай бұрын

For me the purple wire spliced into the Pink/DkGreen wire in the ignition harness and the White/Yellow wire spliced into the Violet/Brown in the same harness. But make sure you look through the install instruction on Flashlogic's website for your specific car.

@lilzywer8421 3 ай бұрын

@@JSparkGarage thank you for the reply very appreciated 🙏

@bigdaddyww1 3 ай бұрын

I’ve tried 2 China cameras and another more expensive one replaced wire harness in tail Gate comes in scrambled for a few seconds then says no signal it’s the one that comes in from sync

@JSparkGarage 3 ай бұрын

That's why I went with an OEM camera. It's expensive but it works without any issues and keeps all the features.

@srt.hunnid 3 ай бұрын

where did u get the metal srt8 pedals at??

@JSparkGarage 3 ай бұрын

They were on the car when I bought it 10 years ago.

@c.g.vproduction9410 3 ай бұрын

Hey, where did you get those SRT8 pedel covers from?

@JSparkGarage 3 ай бұрын

They were on the car when I bought it 8 years ago.

@tayala8426 3 ай бұрын

Thanks for that video. That exhaust sounds sweet. What kind of catback is that? Stock?

@JSparkGarage 3 ай бұрын

Glad you liked it. The exhaust is just a pieced together deal with flowmasters under the car and 12" bullet resonators toward the back. I've got a new 3" exhaust going on in a future video.

@iced_pearl8190 4 ай бұрын

It would have been easier just to take the ignition cylinder out its 1 less screw lol

@JSparkGarage 3 ай бұрын

Interesting..... I didn't see this screw. If I have the lower dash apart again I'll take a closer look.

@josebonillajr4586 4 ай бұрын

Link to where to buy it at ? Thanks

@JSparkGarage 3 ай бұрын

@bricks-mortar 4 ай бұрын

TY. I chose Ford manufacturing agenda over GM, and I am comfortable that, despite that same stuff being in my wheel wells.

@grampymeyer6603 4 ай бұрын

What was Ford thinking? They were thinking make it thru the warranty period and then it isn't their problem..my '09 has 141K on her.. I hide relays and electrical connections behind these (air diverters) fortunately mine are still in decent shape.. But replacement is in (the warm weather) future.. THANX for posting the video and explaining the (replacement) product.

@JSparkGarage 4 ай бұрын

They definitely could of done better. Glad I could help.

@suchefinde 4 ай бұрын

This is 100000% what Ford does, makes sure most things last until the warranty expires then go f yourself

@hookitupfat7692 4 ай бұрын

2005 dodge magnum

@loudom3217 4 ай бұрын

I own the same Bauer band saw but I went with the Harbor Freight portable bench top band saw stand. The stand can be used in the horizontal or vertical positions. The vertical set up comes with a steel plate that attaches to the band saw and looks much like the Swag stand, but for cutting square steel tubing or angle iron to length the horizontal position of the band saw is best for me. The Swag stand looks great and appears to be very functional but it is one dimensional, you can only use the saw vertically.

@TheBuildist 4 ай бұрын

I've been running a setup similar to this for years now, but a bit better, in a single regard: Harbor Freight's older Chicago Electric portaband was more a clone of Porter Cable's portable band saw. That model has the motor sticking out the backside of the drive pulley, instead of vertically between the two pulleys. It's probably less ergononomic for handheld use due to balance issues, but it's way better for stand mounting. A stand mounted old Chicago Electric or Porter Cable bandsaw has the motor down behind the table/stand, out of the way of the table. The key difference is that it leaves the blade "in the clear" with a full passthrough gap to the left side of the blade, just like a "normal" bandsaw. So on my Chicago Electric version of this I have similar overall clearance for cutting, but on stock up to about 3" wide, I can cut ulimited lengths, as the stock passes fully past the saw structure and out the back. This Milwaukee type saw can't do that. So if you're considering a stand mounted saw, you might investigate the Porter Cable/Chicago Electric option.

@777smitty4 4 ай бұрын

Only advice I can add is don’t waste money on that saw it is total garbage mine didn’t last 6 months after inspection the wires to the motor is very very small and you can get to them to repair it. Just go ahead and get a dependable saw !

@JSparkGarage 4 ай бұрын

Thanks for the advice. I'll keep an eye on it and plan to upgrade it in the future.

@Georgiaguntraining 4 ай бұрын

Links to the two would be cool. Yes, I am that lazy.

@Showandperformance 4 ай бұрын

Check out the Harbor Freight band saw stand. It works in vertical like the Swag and you can also use it like a horizontal band saw. I haven't touched my Swag stand since I bought it.

@JSparkGarage 4 ай бұрын

I’ll have to check it out. Maybe do a comparison video.

@Jursaw 4 ай бұрын

I’d buy your SOR stand

@gilhernandez605 4 ай бұрын

It would be nice if you post where you got the stand from.

@JSparkGarage 4 ай бұрын

You can find the table at www.swagoffroad.com

@garycorbin2789 4 ай бұрын

1:01 good to see you back 👏

@nicklashway6636 4 ай бұрын

Does this make the car easier to steal for these dumb criminals out there? I want this but don't want to make it any easier for them.

@JSparkGarage 4 ай бұрын

I don't believe so.

@wjye 4 ай бұрын

I actually replaced my pan with a Dorman pan with a drain bolt, and would drain my fluid every other oil change until it had all been changed.

@JSparkGarage 4 ай бұрын

When I do my next fluid change I plan on swapping in the dorman pan with the drain plug.

@jeremiahwashington8973 4 ай бұрын

Was it the yellow and white wire that you clipped?

@JSparkGarage 4 ай бұрын

Yep the white/yellow wire (next to the white/gray wire) coming off the VS2 plug.

@lilzywer8421 3 ай бұрын

Hey man so when you go to connect the purple and yellow and white wires to the first harness which other wires do you connect them to ? Or where do they go put ?

@mrrife1359 4 ай бұрын

How can I put that in my car Sir

@thatbaggedsrt 4 ай бұрын

My man!!! Thank you for the upload. I have had this kit sitting in my garage for two years now LOL.

@JSparkGarage 4 ай бұрын

Glad I could help!

@thatbaggedsrt 4 ай бұрын

@@JSparkGarage most definitely! As soon as I get a warmer weekend I’ll definitely be installing mine.

@thatbaggedsrt 4 ай бұрын

@@JSparkGarage update! Installed mine earlier this week. Your instructions definitely filled in the gaps where the kit instructions left room for interpretation. Once again, I can’t thank you enough for this upload.

@JSparkGarage 4 ай бұрын

Hell yea!!!!! This is going to be my year on youtube. I have so many parts and projects planned for the car. Stay tuned!!!!

@thatbaggedsrt 4 ай бұрын

@@JSparkGarage can’t wait!!!

@Rrottweiler 4 ай бұрын

Wonder if trunk/hatch release works in Magnums.

@superiergaming5463 4 ай бұрын

Hey man any tips for break dust on my 06rt no brembo breaks

@bigdaddyww1 4 ай бұрын

Can u use for scan to program keys or no

@JSparkGarage 4 ай бұрын

Yes, with the paid version you can program key fobs.

@bigdaddyww1 4 ай бұрын

@@JSparkGarage cool thanks

@spencer1695 5 ай бұрын

Awesome video! Thank you. I look forward to going through all your videos.

Ең жақсы KZfaq

Пікірлер