TRASH VIDEO. COULDNT EVEN TELL US WHATS SIZE STAR BIT OR NOTHING AND THE THING YOU CALL A CATCH CAN IS A DRYER LOL
@Gatsu3D2AАй бұрын
Took a few tries and an extra screw driver to guide the tip a little but thank you, I got it on!
@justheretoinspireyou5803Ай бұрын
😂😂 I’ve known that trick since I was 5 years old I saw a guy hurt his finger trying to fight that spring Grandpa came with his flat head and bing that spring was in place in a second
@gbcsterbear7206Ай бұрын
A lot of extra shit just to get that tube out of the way smh gotta love jt
@davidgilley5717Ай бұрын
I had the same rattle on my 2017 Camry and this fix worked perfectly for me... thank you!
@ulisestj62 ай бұрын
thank You men !
@DjReQuan3 ай бұрын
Thanks Terry
@ayebruham123 ай бұрын
Hey I need some help connecting the wires. So the red wire that’s with the video output connects together with the reverse light cable?
@terrywalters54103 ай бұрын
Is the red wire on the back of your radio? If so it's an input and the wire from the reverse light goes into that activating the screen to allow the reverse camera video input to be shown
@KateSucksAtDrawingCharacters5 ай бұрын
I didnt want to have to remove that pipe, but this video confirmed it. Thank you
@Gator-3576 ай бұрын
I'da just leaded it and be done.
@terrywalters54105 ай бұрын
Yeah I need to get me one of those lead kits . Can I use lead to fill up dings before I paint a car? Is it better or faster? Never seen it used for that
@terrywalters54105 ай бұрын
I still couldn't get to the backside of the hole so I think I would need to add Support behind the hole before I added lead anyways?
@robertkenney60026 ай бұрын
Could I just attack some clear 3/8 tubing as the plug and just fold it over and zip tie it off?
@terrywalters54106 ай бұрын
Yeah that should work :-)
@robertkenney60026 ай бұрын
@@terrywalters5410 it did, thank you!
@nathanflake12077 ай бұрын
this is hard to access. Thanks for the info!
@robertkenney60027 ай бұрын
What did you use to plug the expansion tank after disconnecting return line
@terrywalters54107 ай бұрын
I just picked up a vacuum hose plug assortment kit from advance auto parts and found the one that matched 👍🏼
@robertkenney60027 ай бұрын
Awesome. Thank you.
@robertkenney60027 ай бұрын
What plug siZe did you use
@terrywalters54107 ай бұрын
Just get the assorted pack from any auto parts store they’re cheap :-)
@richardhowells58049 ай бұрын
It's a HYDRAULIC system, it takes hydraulic Oil! An Electric power steering system is ELECTRICALLY driven and needs no oil as it's a closed, greased system!
@terrywalters54109 ай бұрын
OK I hear you and I understand but the hydraulic fluid needed to be replaced and others may need to do it and this video is still very helpful right? Should I edit the title differently?
@robertkenney60027 ай бұрын
Bro, just stop…
@robertkenney60027 ай бұрын
@terry, no don’t change title. Obviously hydraulic fluid, guys one of them internet trolls that have to correct any and everything. General public is going to say electric power steering fluid, as the cap says E PSF or something off those lines. I have a 16” Murano sv
@terrywalters54107 ай бұрын
@@robertkenney6002 thanks buddy that’s what I figured😇
@richardhowells58047 ай бұрын
@robertkenney6002 accuracy is important, especially when it comes to engineering. Considering some people really are stupid enough to believe their headlights need fluid! Tou really want to see a troll, look out your window at the gumbies that populate this world.
@terrywalters54109 ай бұрын
I used a 3/8 adapter with a 3/8 inch hose
@alecsapp159 ай бұрын
You can’t change fluid for EPS.. it doesn’t use any. 😂
@terrywalters54109 ай бұрын
My customer put water in it accidentally ha ha. It looks like a yellow milkshake.
@robertkenney60027 ай бұрын
Lol, what?
@robertkenney60027 ай бұрын
No fluid? What do you Mean? It’s esp fluid for that Murano?
@herbienbrian22 ай бұрын
It has fluid, Nissan specific e-psf
@coritrottman969910 ай бұрын
I like the way you say grommet
@chrism657511 ай бұрын
What a truly terrible install. Why post this? You are teaching everything wrong!! You give us true installers a bad name!
@JaxTropics Жыл бұрын
same thing on mine, same exact car, the screw fixed it
@cincy9381 Жыл бұрын
What size/kind of screws did you use? Is it like #8 or #10 body screws you can buy at autozone?
@adamthewoodworker2571 Жыл бұрын
Hey, did you show in this video where you put the grounding wire?
@danieldavis6090 Жыл бұрын
Wish I knew what this noise sounded like from the inside of the car. When going around 55 or higher on the highway I hear what sounds like a tapping noise in the rear of the car. Almost like something is tapping the windshield but nothing is. Originally I thought maybe the third brake light was but I tucked something in between it and still heard it. I checked where these clips are and their semi loose. Maybe it’s the issue I don’t know entirely
@brina.b Жыл бұрын
Dude thanks! Couldn’t figure it out
@michael12125 Жыл бұрын
Is it the same for a 04
@terrywalters5410 Жыл бұрын
Yes
@ShrawanRegmi Жыл бұрын
Nice video dude.. can you tell me what colour is the brake wire and maybe the 12 volt accessories wire? I'll appreciate it. Also, was your reverse cam lines properly centered? Mines a bit off ..like if I park right at the middle in between the parking lines.. on the camera lines there's a lot more space on the right
@terrywalters5410 Жыл бұрын
As far as the camera not being centered you probably just need to bend it in the opposite direction a little bit? I'm assuming you have a metal camera frame that's different than the one I used in this video? I usually use just a regular test light and put the car in reverse to find the wire that has power. Accessory wire is usually found in the neck of the steering wheel just switch the key on and off till you find one of the bigger wires that light your test light. You might could Google those wire colors and find what you're looking for as well :-)
@ShrawanRegmi Жыл бұрын
@@terrywalters5410 thanks so much Terry. I actually went back and checked another video.. and they had the camera right under that crease ..I guess that's the middle..mine was off by an inch lol.. I'll move it to place and see if that fixes it :) ..I did use your wiring method though worked without any hassle.. have a great day mate..cheers
@rubenjotaru Жыл бұрын
kzfaq.info/get/bejne/jdJgpZupt5OoYnU.html
@chriscarachure9237 Жыл бұрын
youre sent from heaven bro thank you
@recyclops35872 жыл бұрын
This video didn't show anything so how could it help. You had parts off already. Why would you do this video over a step by step replacement. Your tip is moot without showing those with no car knowledge how to remove throttle body and housing.
@chrisnas14832 жыл бұрын
I need to watch Dean and Fernando, thar looks like a 911 to me..
@brucesanchez29402 жыл бұрын
Not descriptive at all. All over the place. “This is the ignition, now let’s go to the trunk”
@sabahjason12 жыл бұрын
What engine size please
@murrayndumba32902 жыл бұрын
Good job bro
@coalitoncoup2 жыл бұрын
id just try it right now and I f ing love you. 🤠🥳🤗
@jonathanm5052 жыл бұрын
Ha Gayyyyy!!! Lol Jk Some of these videos are headache savers for sure.
@dinhchieunguyen6842 жыл бұрын
So easy???? Why didn't you undone it and show us how easy.
@PheaktraTim25 күн бұрын
bro i should’ve done this a while ago😭
@tonistarks28742 жыл бұрын
Wack video..didn't even show how u did it.
@nervousordo2 жыл бұрын
I have a 1999 Honda Accord EX and tried to do this but it busted the wheel cylinder. Had to take it in to a trusted mechanic where it took two men to get it on.
@ruready23432 жыл бұрын
kzfaq.info/get/bejne/nciGpKmH2tDPhXk.html
@E3PS79102 жыл бұрын
Thanks!
@prophecy07313 жыл бұрын
🐐😎
@Godzilla201913 жыл бұрын
Maybe cuz it’s rusting and there’s no sides
@jkim49113 жыл бұрын
Easier said than done. Why didn't you show us? Too many videos of the finished step and nothing that shows. Thumbs down 👎
@terrywalters5410Ай бұрын
I don't have a phone stand. The people that tell you how to do something instead of showing you how to do something probably don't have a third hand like me ha ha if you can't take my directions and apply it yourself maybe you shouldn't be working on cars?
@ramblingwilly30243 жыл бұрын
Thank you man!
@chastityhenning19443 жыл бұрын
I wish I would have seen this before taking mine off. Omg it was a pain in the but. I wound up breaking the clips not knowing I needed to push them in cause I couldnt see anything.
@crazytech57553 жыл бұрын
"500-600 RMS VERY powerful amp" *Looks over at my hifonics 3200 watt amp* - "What are you"
@thomashernandez40273 жыл бұрын
Damn alternator is hard to remove and install. Getting that 12 mm lower mounting bolt to guide in is so frustrating
@josearaiza95193 жыл бұрын
Where'd you splice for ground
@terrywalters54102 жыл бұрын
Just ground it to any metal close to the amp I usually just peel the carpet back grind some paint and screw it down :-)
@juanrios50263 жыл бұрын
Wouldn't been even better if you did a demo
@joshw65783 жыл бұрын
We have an 06 and I'm trying to locate the coolant temp sensor. I've removed the air intake and throttle body but don't see it, can't find any good videos on it or pictures. Would someone be able to point it out? The car is still giving us issues with not getting up to temp and blowing cold air, at idle will over heat. Over the past year we've replaced, heater core, the radiator, the thermostat twice and had a coolant flush done. Nothing has helped yet. I have the new sensor but can't find the location. If this don't work I hear it could be a compression issue. Any help would be greatly appreciated. Thanks.
@atheaonpayne68632 жыл бұрын
Did you ever find where the sensor is. I’m looking for it and can’t find it.
@joshw65782 жыл бұрын
@@atheaonpayne6863 nope, I got tired of working on that money pit and sold it off and got a newer car with better gas mileage.
@gregorykusiak54243 жыл бұрын
These engines can be difficult to bleed the air out of the cooling system. I have an 07 rendezvous, and someone suggested I park it facing uphill at night, and raise the rad cap higher than the heater inlets on the firewall (I used a ramp). Using a spill-free funnel the morning after i replaced my ‘stat, I was able to get another 1/2-3/4 of a gallon of coolant in as it warmed up and cycled through, pushing the air bubbles out.
@Micscience2 жыл бұрын
I believe this style cooling system the air comes out threw the resevour tank since it is probably just as high as the inlet and outlet hoses.
@gregorykusiak54242 жыл бұрын
@@Micscience actually on mine the reservoir is higher than the rad cap. Unfortunately, air compresses more than liquid, so whatever bubbles are in the coolant system tend to get trapped in there, so giving them a few different places to exit when the system is open is usually best.
@Micscience2 жыл бұрын
@@gregorykusiak5424 Yea same with mine however the inlet and outlet hoses of the heater core are around the same height of the reservoir. I still notice when using ramps it does a better job. You can see the bubles come up into the reservoir. i have a video of it.