Question tho my fender does not have a hole to put a fastener in, is there a different one I can use?
@740Racing20 күн бұрын
@@kotadrifts2956 means you have an aftermarket fender and would have to drill the hole or go without.
@joshmarauder2 ай бұрын
There are 2 clips per side not just 1..there is another square clip that slides into the square notch into the bumper @39 seconds u can see..gm part number 11609871
@camdickens13 ай бұрын
Made my day been dealing with this issue for weeks now
@TitanTraveler3 ай бұрын
Where did you get that intake tube at? From the turbo oval to the air box?
@740Racing3 ай бұрын
CFT performance
@IsakYakubu4 ай бұрын
Hi
@maxwellwills18166 ай бұрын
Man its been a long long time since ive seen this old girl out! Maybe Niki could give it a drive again lol
@ahmedalial-saeed94716 ай бұрын
I have 2022 ECO DIESEL limited, if I want to do it so in the same place?
@banjobailey18497 ай бұрын
Ford for the win
@ChillOut17167 ай бұрын
Kobalt comes with a 5 yr on tool and 3yr on battery Bauer only comes with. 90 day unless you want to pay for extra
@TheMynig7 ай бұрын
Damn and that’s the coupe which is heavier than the sedan g37
@jonny6218 ай бұрын
Hello, please, I have the same terminal with 5 cables from the switch box and there are 6 cables on my remote start, I write: yellow kable (st), brown (key on2 ig2), black (b-), blue (acc), red(b+), white (key on2 ig1) …can you tell me which colors to combine? I have 1 red, 2 brown, 3 yellow from the right, I don't know if it's correct, and I don't know where to connect the rest, thank you
@kevingebert43168 ай бұрын
I'd be curious if you were getting a "service electronic speed control" message when that was dirty.
@740Racing8 ай бұрын
I was not.
@kyleyabut67518 ай бұрын
Hey brother question, I’m trying to purchase this car but I would like more info. Do you have an IG or anything so I can contact you? About this build?
@740Racing8 ай бұрын
Tim.u.33 ig
@kyleyabut67518 ай бұрын
@@740Racingcool gonna hit you up !
@HandSolo18 ай бұрын
C5Z all the live long day.
@dynotunemotorsports91568 ай бұрын
PopnBang
@orated7629 ай бұрын
600HP?
@Rick_B529 ай бұрын
I love seeing Altimas putting in the work! 🙌
@BladerRyu10 ай бұрын
Wow that was an awesome race 🤙
@michaelmartinez918511 ай бұрын
MICHELKKJROP
@trevorashton459811 ай бұрын
Hello hey I have a 2019 eco hey is there gaskets or anything either side of the EGR defuse tube ?
@trevorashton459811 ай бұрын
Ahh found it yes still stuck on the manifold just reused it
@trevorashton459811 ай бұрын
Yeah i had the pleasure of snapping my map sensor clean off had to buy a set of 3 picks to get the filter out the engine Moral of the story get your minni picks before hand and @Geno's Garage has map sensor for $89 Or $260 at a dealer ship
@Bishoff03 Жыл бұрын
And that’s why I left the RX-7 and Supra community for the late Model Mustang Cobra. You can build your own car to beat either one one of those cars in 4/5 things. When I sold my “ legendary” Supra for a 96 Cobra many in the Mustang community even laughed. I now own two. Mustangs for the win!! 😊 legendary
@sm-gj4rq Жыл бұрын
The Honda driver sucks! Up on the rev limiter between shifts is a guaranteed loss! Shifting gears clean is super important to have a chance of winning.
@timyanke9559 Жыл бұрын
definitely, he spent 2 seconds on the rev limiter would have been a closer race
@TheRealBootyWarrior Жыл бұрын
420hp on how many psi? My car makes 420whp naturally aspirated on the base tune, I have ported heads, forged rotating assembly, cam, 1 7/8 longtubes,
@Silney2010 Жыл бұрын
Fortin EVO-CHRT5
@StaxxxCmd Жыл бұрын
How long did it take?
@mrip3078 Жыл бұрын
bauer sucks! that's all i need to know
@seattlejdmcivic Жыл бұрын
My buddy had the Mazdaspeed RX-7 with 240 HP 6-speed manual with cold air full exhaust and header and I have the very rare Edition 7th gen Honda Accord V6 6-speed manual coupe with the HFP Honda Factory performance package and I have cold air J pipe AKA header and full exhaust and I was able to beat him every race we switch drivers same thing happen the Accord one every time
@nepzski Жыл бұрын
rolling at 20 mph knowing full well integra gonna spin its tread off
@davegeisler7802 Жыл бұрын
That TTA was right with you SS
@christopherbutcher5373 Жыл бұрын
Best video to install a remote start on 06 Chrysler 300. Factory instructions were nowhere close to as useful as this video. Cutting wires seems skeptical but everything worked. It was a pain to splice under the dash so leave enough wire to get your fingers around them to twist them together.
@petrolhead8851 Жыл бұрын
That z06 sounded lovely
@Hulk-g4v Жыл бұрын
That TA turbo was my dream car at the time it came out , they had under rated their hp on paper because it beat the corvette at the time 😭
@qashas5780 Жыл бұрын
Great video how long does it take to change each gasket? Thanks
@740Racing Жыл бұрын
Just depends on how caked on and reaching everything. I’d say 30 minutes or less per side
@PhoenixRising251 Жыл бұрын
There's a guy in my area that still has a TA just like this. Not sure of all the mods done to it but it's absolutely horrifying in a straight line pull!
@nzb699 Жыл бұрын
So why did you cut the yellow red again? Can you just go straight to the 5 pin? Also, I thought I did it right but when I hold the button down, they just keep blinking? What am I doing wrong?
@Usmc9132 жыл бұрын
How much boost was this on? Which pulley
@740Racing2 жыл бұрын
Not sure on exact pulley size but it was 13.5lbs
@Usmc9132 жыл бұрын
@@740Racing thanks. I just bought the same kit so I'm trying to figure out what pulley I want to run.
@Overlord2772 жыл бұрын
I miss these old half minute videos. No talking. No BS. Just pure racing at its finest.
@matthewm3252 жыл бұрын
Wow can't wait to see what my h/c/I e85 & 200shot c5 makes & runs after seeing this blue vette!!
@Escalofrios292 жыл бұрын
Probably a running anti lag and better tires would have helped the teggy
@k.a.d.msrt83262 жыл бұрын
So does the kit come with everything? Or do u have to buy the T harness separately?
@cundoheredia85302 жыл бұрын
Thank you. Very helpful, never worked in Subaru until today 👍
@lucidrebuilds61292 жыл бұрын
You can do this with engine in car? I did a clutch and forgot to take care of my valve cover gaskets while had the engine out.
@740Racing2 жыл бұрын
Yes. Engine was in car when I did it.
@k.a.d.msrt83262 жыл бұрын
I want the same system but I also seen people installing push buttons to replace the ignition. I feel if I got one I couldn't use a remote start also. Not entirely sure
@k.a.d.msrt83262 жыл бұрын
Finally someone with a kit using the factory fob. Been searching forever now!
@WILLYSCHNUCK2 жыл бұрын
im going for it now.. Where did you mount the controller?
@crazydrivergsx16602 жыл бұрын
Week
@WILLYSCHNUCK2 жыл бұрын
Thanks for the video, but I think I'm mailing my setup back to pushstart