All push to start Honda / Acura vehicles have this feature. Same way it will not auto lock the doors if you leave a fob inside the vehicle. You can't even lock them with another fob if it sees one inside the vehicle.
@briankholidayКүн бұрын
Can you do a video on removing the grill also?
@mauriciowinston5293Күн бұрын
Excellent
@ajsmith95302 күн бұрын
Cool😐
@kenneththomson94924 күн бұрын
Great video! Anyone know if any generation 1 bumper cover will fit on a 2015
@hoomanity5 күн бұрын
Worked as described. Thanks!
@hoomanity5 күн бұрын
Perfect instructions. Thank you!
@ironpickX5 күн бұрын
thanks for video
@dennisalcordo27897 күн бұрын
Does anyone know the part number for the screws? Im missing a couple
@HowItsFixed7 күн бұрын
Screws usually don’t have a part number. Best way to get the missing screws would be to visit the main dealership and provide them the VIN number of the car. They can then provide the missing screws. Hope this helps….
@shaniyasims162611 күн бұрын
Thank you!
@vio50311 күн бұрын
Pretty efficient short but gold video. Thanks buddy.
@danielbrewer-i8d13 күн бұрын
I need to replace only the bottom part is it a lower bumper or valance?
@danielbrewer-i8d13 күн бұрын
I need to replace only the bottom part is it a lower bumper or valance?
@Marcodelahuen115 күн бұрын
Muchas Gracias,me ayudó mucho el video.
@Ghost-hk1kc24 күн бұрын
Perfect, thanks for uploading
@lincoln64continental27 күн бұрын
Have you the oem number on the bumper?
@Gh0ulzTY27 күн бұрын
Do you know why it would have not started back up when the car had the same amount of damage but on the Driver side?
@fanzfanzilla28 күн бұрын
Nice!. Thank you.
@BloodofaFool29 күн бұрын
Appreciate it! Just scratched up my passenger fender yesterday. The part isn't cheap so I was going to install it myself. Your video was efficient, to the point, visually reassuring, and so well done. I appreciate you mentioning the screws you didn't have rather than fast forwarding. 😊
@HowItsFixed29 күн бұрын
Glad it helped!
@elink786Ай бұрын
Thanos ❤❤❤
@USN_Ret-Ай бұрын
Thank you
@DokemsyАй бұрын
hat about the sensors?
@karenk3986Ай бұрын
How do you replace the slash sheld
@manu2good11Ай бұрын
Hello, it would be nice if you could list your tools.
@HowItsFixed21 күн бұрын
Hi, Here is the list of tools: - Door upholstery remover (clip remover) - Phillips screwdriver - Phillips screwdriver bit with small wrench - 10 MM nut setter with wrench
@Teresa-zy4zoАй бұрын
Thank you!! I tried for an half an hour to install the blades. The directions say to put bracket on blade first and try as I could I couldn't get on the wiper arm. I tried it your way and I was able to get the new wipers on. Thanks. 😊😊
my car got messed up from the right and this definitely helped bc i have ZERO confidence in taking my car apart but thank you ! i have a better look at what am doing now
@HowItsFixedАй бұрын
Glad it helped!
@marynelson4626Ай бұрын
OK, so I know it’s been a little while since you posted this video and it helped me a ton and saved me a lot of money. I was able to replace the bulb, but when I went to put it all back together, I dropped that stupid plastic nut down the inside of the flannel backed cover! Do you have a video on how to take that stupid flannel back cover off so I can get the nut? Or should I just get one at the auto parts store? I just might do that.
@HowItsFixedАй бұрын
Depends on how deep the plastic nut is gone. Try to see if you could squeeze in your arm, hopefully you can find it.... Other option: I think there are two plastic nuts, I guess it should be fine if you can only get one plastic nut tightened just for the time being
@sabrinafelberАй бұрын
Thanks
@Adolfo1330Ай бұрын
Thanks this bumper sucks breaks really easy
@reimelcamacho34542 ай бұрын
where can I buy a replacement bumper?
@jaywilliams44992 ай бұрын
Need one for side finder front passenger side
@Falcon-tf4ww2 ай бұрын
Thank you for the video. It helped me in replacing my speakers. Thanks
@HowItsFixed2 ай бұрын
Glad it helped
@alexandrealmeida29322 ай бұрын
Bom trabalho de reparo.
@user-dt6ff3pn5s2 ай бұрын
What sensor is behind the Toyota emblem??
@HowItsFixed2 ай бұрын
This Rav4 had a 360 degree camera. It was the plug for the camera
@briangray76142 ай бұрын
Excellent tutorial! Thanks.
@josephsosa55882 ай бұрын
Yeahhh I’m not doing all that
@HowItsFixed2 ай бұрын
lol
@josephsosa55882 ай бұрын
@@HowItsFixed okay wow! I have a 2020 Nissan versa and the mirror is in a completely different spot but with this video I did it! It took 5 hours but I did it!😊
@nataliaarizpe26862 ай бұрын
Thank you so much I’m going to have to try this by myself. Do you have a list of what tools you used?
@HowItsFixed2 ай бұрын
Thank you for watching Tools: Door upholstery remover 10 MM nutsetter with wrench
@johnobrien60522 ай бұрын
I'm actually doing this today. The center of the grill/bumper feels like there's something holding it. Both sides are free, all the clips are out top and bottom.. How much force does it take to pull off? I don't want to break anything.
@luisaguilar753972 ай бұрын
Amigo, por favor podrías hacer un video acerca de la activación de control crucero en versa versión básica con hardware externo de alliexpres, sub, like, y compartido
@kielseveseverino79412 ай бұрын
Hi friend, how are you? Can you tell me if I get a whole front of the Rav4 model 2018 with all the radiator... Will it fit the 2015 model...change the rav model 15 to model 18
@phoneonly102 ай бұрын
Removing too much now, there is no need to touch the tweeter, that was for a chance to damage it, this video is no bueno
@HowItsFixed2 ай бұрын
Wrong. Taking out any part on the car has the chance to be damage/broken. Not just tweeter. One has to be careful in taking it out properly :)
@GiveAway-ud9jo2 ай бұрын
Hai.. I lost my bumper screw at the bottom inside the tire that you open at 0.40 min... Can I know the size of the screw? I want to buy new one...
@xandrodist46052 ай бұрын
where is the best place to buy a front bumper? I am in need to replace mine
@llamacebu216Ай бұрын
I'd call junk yard. Civics are pretty popular cars
@ToadalSimplicity2 ай бұрын
Thank you! Very straightforward tutorial. Using this so I can try to clean my condenser coil to improve my ac performance.
@meadow91653 ай бұрын
Thank you! Appears I need clips and screws. I wanted to remove the wrecked bumper (i ran over tire tread and want to replace with a bumper I ordered from a wreck yard . I'm missing my wheel well liners on both fronts and the bottom liner... I bought all.... so I just need screws and clips....