What's the size comparison from the mtu14 and mtu15? Never mind, I just got to 2:20
@nickholashaney928914 сағат бұрын
I don't suppose these are the same for the EXT models are they? they look really good. I also need to replace my fog lights, those also look pretty good.
@beardedreviews12 сағат бұрын
yea they would work, as long as you have the HID bulbs
@GD4AWG17 сағат бұрын
I’ve got an 04 Yukon xl denali, bought it at about 150,000ish miles lifted it added quite a few more cosmetic mods even a train horn and I plan to add much more to it they run forever and if you had to get a engine transmission etc they’re easy to find and fix only thing I don’t like about them is the fact I get 8 miles per gallon 🤣
@RicoAllen23 сағат бұрын
Great video man. I don't usually watch these type of videos in their entirety but i this one i did. Thanks for psoting it.
@richardgreene3460Күн бұрын
Wondering how these would compare to the "My Pillow" that was popular years ago?
@beardedreviewsКүн бұрын
Never tried one, but I know they're really expensive
@weskirkland5850Күн бұрын
That's badass!
@beardedreviewsКүн бұрын
thanks man! Glad it was helpful
@paddlepower8882 күн бұрын
Those swivel wheels seem small. Pretty funny that I bought the HF utility cart to hold my welder, cutter and other stuff when I could’ve built one! 🙂
@beardedreviewsКүн бұрын
I never thought about trying that!
@paddlepower888Күн бұрын
@@beardedreviews that service cart was a mistake bc the shelves have a 3.5” lip that gets in the way of welder cables that come out of the lower front. I made a table frame of angle iron that sits on the top shelf. The table top is a wood plank on which I strapped a welder and a plasma cutter. I welded a couple hangers to each side of the table to hang cables. The $60 (now $90) Harbor freight welding table hangs on two hooks on one side. The cart holds PPE, welding, rods, angle grinders, and everything but raw metal. I guess I should make a short video showing the cart.
@iDrkTV2 күн бұрын
From someone who's also a side sleeper and also gone through many, many pillows of all cost ranges- I completely agree with this review. Well said, sir! 👌
@beardedreviews2 күн бұрын
Yea these things are a game changer!
@iDrkTV2 күн бұрын
@@beardedreviews Asolutely! 🙌
@RetroRiders_250R_Magazine2 күн бұрын
Love your Camaro videos
@beardedreviews2 күн бұрын
thanks so much man! I'm doing a video summarizing all the mods here soon on the channel
@@beardedreviews ahh yeah I think most cars gets old after 3 years. It’s a problem us car guys have lol
@ciarancaplan46783 күн бұрын
Hey man, great review as others have said!!! How’s it going a year later? You still using it on set and forget and still using the same scent? Any updates you can quick give in a reply would be much appreciated.
@spencerd10793 күн бұрын
Does your end locker have four threaded nut inserts on the top? Wondering if they will eventually release top cabinets that ago across a hutch, similar to snap on/icon….
@beardedreviews4 күн бұрын
Get it here: amzn.to/3VwZmNL Bamboo Sheets: amzn.to/3VvQ6K3
@kimberlyloeza98984 күн бұрын
Link for bamboo sheets?
@beardedreviews4 күн бұрын
amzn.to/3L9TfZy
@mikeo6104 күн бұрын
Hey man I came across this video kinda late. So why are you welding in the rear spring perches? Are the springs a different length? Just curious. Btw I have a 88 Toyota pickup standard cab long bed. 🤘🏼
@beardedreviews4 күн бұрын
The previous owner moved the perches forward to do a lift on it. I was just undoing everything he did on it. Is your truck stock?
@mikeo6103 күн бұрын
@@beardedreviews Ok that makes sense. I was lucky enough to inherit the truck from my old man, he bought it brand new in 88. I added a 3in body lift, 1.5in suspension lift, thicker torsion bars. 33in BF MudTerr on 15x10in wheels. It wasn’t my daily driver. I’m thinking about doing a solid axle swap up front or changing everything back to stock?
@beardedreviews3 күн бұрын
@@mikeo610 For a daily driver, you want the IFS front end man. That's what I have and would never swap for solid axles. Does yours lean front or back as far as when you raised it?
@mikeo6103 күн бұрын
@@beardedreviews The older I get the more I think about changing everything back to stock. Right now the truck does look a little higher in the front but just a little adjustment with the torsion bars will fix that. Is yours not even height wise front to back? And how is it driving with a turbo?
@DAVIDVAGNETTI4 күн бұрын
YOU Are hilarious if you buy from them, there is a place called VINEVIDA, YOU ARE GONNA THANK ME!
@lawrenceonyeagusi74645 күн бұрын
Nothing wrong with the 2018 they all drive the same
@beardedreviews4 күн бұрын
true, but it doesn't have apple carplay
@mattpollock72825 күн бұрын
Did you have to raise your garage framing? If so, do you mind outlining your process?
@beardedreviews5 күн бұрын
Get it here: amzn.to/3UfA5Xm
@saadalghamdi32035 күн бұрын
Thanks pro its help
@beardedreviews5 күн бұрын
Glad it was helpful!
@JoelGeorge5 күн бұрын
Bro thanks so much for this video! So informative and you even updated a link to the newer model! That's awesome! Thanks so much!
@beardedreviews5 күн бұрын
no problem at all!! Glad it's helpful!
@thomasgarone27255 күн бұрын
I Mask off cars all day at work I would get fired for that this blows my mind
@beardedreviews5 күн бұрын
thankyou for understanding. Most people in this comment section have no idea what I'm complaining about
@finkoflame51685 күн бұрын
I’m using paddle shifters in my 3rd gen with 4l80 and manual controller from eBay
@beardedreviews5 күн бұрын
that's awesome!! You could use this wheel and hook up the paddle triggers to your transmission controller
@jaleelholloway69185 күн бұрын
I wanted to know where did you get your radio from and does it come with CarPlay because I was looking for one and didn’t really know a good place to find a one ?
@beardedreviews5 күн бұрын
Here is a link: amzn.to/3UfA5Xm
@alcha936 күн бұрын
just loop your chunkier charger cables down into the bottom drawer for the chunkier chargers. But then you'd be using another drawer for charging. The bad opening on the bottom drawer might be the lock thing not installed properly. i saw another video where you can easily slide the lock out. maybe take it out and put it back in. might solve your issue.
@toddgoulart69616 күн бұрын
Tbh you should have gutted the car completely like lights, seals and put the car on donuts is what I’m going to do without my new suspension too I’m using the old suspension I think that’s my best bet
@garryrscott7 күн бұрын
Stop whining! The car looks fine! Who cares if the wheel wells have some over spray? Your only real argument may be the one door sweep.
@dominickmckenzie52267 күн бұрын
80% of the comments are answered within the video. Stop asking and watch the video.
@different-abled53327 күн бұрын
Traveler traveler
@different-abled53327 күн бұрын
The travelers seat
@user-tf3sx9ih2y7 күн бұрын
Would you get the Escalade ? same year ?
@beardedreviews7 күн бұрын
I did get one:) I have a video about it
@abdoolsaleem34507 күн бұрын
It's a walnut wood and Yamaha was part of this car I just bought a 2005 same I love those cars I will buy another one soon you have a beautiful car my friend they don't make cars like these anymore
@beardedreviews7 күн бұрын
They really are awesome!!
@williamfolk30998 күн бұрын
Awesome video! I could not find a decent review for the Luxury Mats. Great Job!
@beardedreviews8 күн бұрын
Yea I couldn't find one either, so I figured I might as well make one
@jeronronnunkoffunk46919 күн бұрын
Love the drivetrain in these trucks even the rare 8100 vortecs v8s!! I’ve been looking at these trucks as well as the second gen Escalades, I do notice that one frequent caveat particularly with the half tons is the transmission failures , but still I know that can be fixed for not too crazy amounts of money and you’re good to go!! I recommend maybe using upgraded trans coolers in many cases! Thanx for this coverage and tips🔥🔥🔥🙏🏽👍🏽👍🏽
@durdicamac96629 күн бұрын
I have a favor to ask. Anyone please. I have LS 430 2004 that has issue with OBD2 wires. I think my mechanic put at least one of the wires into the wrong opening. On my other LS430 2002 wires are different. right now my wires are as follows: top wide side: #2 is white/green, #3 is black, #4 is Brown, #5 is white/black bottom narrow side: #9 is black, #10 is black/green, #11 is white, #12 is pink, #13 is black and #16 is black. Anyone with 2004 LS430....I can not pass the emissions.
@andresreyes752610 күн бұрын
Bad ass tool box just subscribe to your channel bro
@beardedreviews10 күн бұрын
thanks so much man!! Glad to have you here!
@michaelhammond602910 күн бұрын
Where did you get that ported sub box
@beardedreviews10 күн бұрын
I got it on ebay. I don't think they make them anymore though
@michaelhammond602910 күн бұрын
@@beardedreviews lol nope they dont
@deborahanderson421110 күн бұрын
I have a 2004 esv since 2009 and now I'm having a/c problems
@beardedreviews10 күн бұрын
like its not blowing cold? If you dont have a leak, it's really easy to charge up
@aaronwood813410 күн бұрын
They had keyless entries then I would watch salvage yards and find wreck one with keyless entrie
@beardedreviews10 күн бұрын
yea it would be cool to retrofit one in there!
@danielpeaire161511 күн бұрын
Next time do a video from other shops to compare prices and procedures , then cry about your car……..
@beardedreviews11 күн бұрын
too busy drowning in my tears to take the time to do that man
@coloradobiker848311 күн бұрын
Bro that Milwaukee ratchet is better that the snap on! I have both and the Milwaukee has consistently performed better! Snap on is faster but the Milwaukee has more torque
@beardedreviews11 күн бұрын
Yea I really do like that ratchet, especially with the extended reach
@coloradobiker848311 күн бұрын
@@beardedreviews it’s great! No need to be ashamed of it! Nice set up brother! Just subbed
@beardedreviews11 күн бұрын
@@coloradobiker8483 Thanks man!! Glad to have you
@xxMTxxDEWxxКүн бұрын
@@beardedreviews You know Dewalt has some extended reach ones out now don't you? **hint** **hint** lol
@edhuslik11 күн бұрын
Bought a 2005 with less than 40,000 miles from senior lady, original owner. Driven one year, 6000 miles, and absolutely no problems. Hard to fathom how good a car this is as it still drives like a new car. This car was arguably better when new than a S Class or 7 Series and you would have to be nuts to buy any other used luxury car and expect this kind of reliability.
@beardedreviews11 күн бұрын
very good point! Amazing cars!
@fortyfiveacp693911 күн бұрын
awesome tool box
@fortyfiveacp693911 күн бұрын
I like the DeWalt power tools. Ive been interested in the 3 in grinder so I might have to pick one up but I'll stay away from that heat gun.
@beardedreviews11 күн бұрын
thanks man!!
@douglasbarr263611 күн бұрын
Are the stock speakers mid bass or mid range?
@beardedreviews11 күн бұрын
mid bass
@mrchillpill862511 күн бұрын
I like the honest review 🤙🏽 I’m looking forward to fixing a trailer I have half way built that was given to me. This might be the welding machine to finish off the project. Just to haul trash or junk nothing too heavy. Could you do a video on the machine running on 110?I would like to see it running on 110 since I don’t have 220 plug outside my house. That would really help in deciding if this is the machine to get. Plus affordable (cheap) too. Thanks great n funny video 😆