Hello Sir, please make a tutorial on STAR-CCM+ for High pressure Die Casting simulation. Thank you in advance.
@savage22bolt323 ай бұрын
Constructive criticism, no disrespect; lose the background noise. The subject & your narration of it is great! The addition of distracting, monotonous & annoying music ruined the vid for me.
@honestdudeguru4 ай бұрын
BOM lines?
@el_passant4 ай бұрын
Worse quality of the demo video was not available?
@tmzhakan7 ай бұрын
Hello dear, ı want to learn this module ( line design ) of nx please support me about that
@habibkhan22328 ай бұрын
Songs
@mortenlund141810 ай бұрын
As a complete beginner I can say this software is awsome. It was a dream that came trough with the community edition. The learning curve is actually quite flat. There are so many ways of completing every task. Technical objects are a walk in the park. Just blown away.
@Ivan_dzn9 ай бұрын
solidworks best
@chandrew-do9xk11 ай бұрын
I use UG12.0. Although the interface is somewhat different, the basic operations are similar.
@astafzciba Жыл бұрын
Doe nx uses a mesh similar to fusion 3d or is a proper cad gyroid?
@Desbubulles Жыл бұрын
Hi, after the Gyroid generation, do you have the capability to perform FEA simulation on the generated CAD design ?
@sriramneravati5048 Жыл бұрын
I know they usually do a flow simulation to validate the flow and ensure there are no stagnation points in this system.
@cebyms1339 Жыл бұрын
Which NX version area you using?
@memingineer Жыл бұрын
Not sure about the surface roughness, internal features with precise dimensions and anisotropy of the material and manufacturing process, but inventions need these novelties, great. (I wathced the video when it was first released, today it is still up to date)
@hasanc2020 Жыл бұрын
Is it possible to scale the Gyroid inlets so that there is a better flow transition?
@Erik-gg2vb Жыл бұрын
Siemens, please don't rely on China to much. Russia should be a clue to what can happen to you.
@davidswanson5669 Жыл бұрын
I’d hope you are printing the parts on their side. Those layers would hold up better under rotation if they aren’t naturally wanting to shear at any layer.
@regeman100 Жыл бұрын
metal 3d printing works a little differenty than the typical plastic filament 3d printing. there are oher things to worry about here tho
@PicasGames Жыл бұрын
Can You share this?
@6X00X6 Жыл бұрын
Finally i've found what I'm looking for! tq sir for the info!
@rsdesign3742 Жыл бұрын
Sir ye ko sa nx hai
@Mayank14may2 жыл бұрын
I purchased a solid edge licensed but there Is not not available harness design can you tell me how to add this feature
@sssfsfdfsdsdffsfsdf42 жыл бұрын
Its missing select vector and looping
@kathymcgary66002 жыл бұрын
The image is too offensive
@_Its_Vestige20042 жыл бұрын
I want dimensions of that blde sir please
@annakquinn7084 Жыл бұрын
We got the India guy!
@midhunr31762 жыл бұрын
Could you please put link for this cad file in description of video it would be very helpful
@user-pn1cx1xg4e2 жыл бұрын
Hello. Is it possible to get Stp output from a porous part in NX? From which version is the gyroid lattices available?
@nguyenvantuan59732 жыл бұрын
Can you help me run this CFD problem by FloEFD . I need to know the results are relatively accurate in order to judge according to reality, Thanks
@nguyenvantuan59732 жыл бұрын
Hello, Hello I am using FloEFD for Catia V5. I do the centrifugal fan CFD simulation with the model I send the stp file. I want to simulate with the following fan parameters - The number of revolutions rotor is 2135 rpm - Pressure difference of fan: 2500 Pa - Flow of fan: 15000 m3/Hour All considering the medium is air with a temperature of 90 oC Please help me, I have done this problem in Catia but it seems the pressure is too big, it's not realistic - maybe I set the wrong boundary condition? Thanks
@brackbrains44962 жыл бұрын
I have a question, how to use NX to build lattice construction, my software does not have this function, do I need any paid plug-in
@beneveritt27202 жыл бұрын
I have a question, how does this affect the overall airflow?
@kaizenplm2 жыл бұрын
Hello, It will cause a pressure drop which will vary dependent on the fluid properties. We can use integrated CFD to determine the effect more precisely.
@dr.jayantthakare87072 жыл бұрын
Single crystal without directional solidification, is it really possible ?
@anshulbhardwaj40382 жыл бұрын
They are not crystal blades
@majesticrattoon4429 Жыл бұрын
@@anshulbhardwaj4038 I see someone has not been paying attention in his materials engineering classes.
@anshulbhardwaj4038 Жыл бұрын
@@majesticrattoon4429 3d printing is welding unlike casting which produces single crystal blades One more thing in laser metal printing grains follow direction of laser unlike single crystal blade casting where cooling metal forms single crystal .
@anshulbhardwaj4038 Жыл бұрын
@@majesticrattoon4429 I might have missed materials class but i did attended my solid state devices class.
@majesticrattoon4429 Жыл бұрын
@@anshulbhardwaj4038 Yeah and the guy is asking whether it's possible to 3D print SX alloys. The answer is no. But theoretically you do not need SX alloys heat resistence if you can cool the blades more effectively thanks to 3D printing. Having SX alloys with complex inner cavities is the dream here, which IMO isn't conceivable.
@hieuoan57872 жыл бұрын
Hello! I am learning about this and i really need this module Multi axis depositon! Can you give me that module? please! Thank you very much?
@Erik-rp1hi2 жыл бұрын
So what is it that China has such a hard time making that holds them up in make reliable long lived jet engines?
@TheNefastor2 жыл бұрын
The list is very, very long.
@celestialmedia22802 жыл бұрын
China's acient scholars used to come to Bharath to seek knowledge But here because of invasion most scholars were killed and scriptures were burned The list is long very very long.....
@user-uk2du2jc6n2 жыл бұрын
Hi Kaizen, May I ask you what software are you using for implement gyroid lattice structure into the part? Thanks a lot
@kaizenplm2 жыл бұрын
Hello, It's Siemens NX
@69mrnikolai2 жыл бұрын
what would be innovative is a single printed mono-propellant high isp engine, with nitrated alcohol-group chains as a fuel source
@paullangford81792 жыл бұрын
But that wouldn't be a gas turbine.
@celestialmedia22802 жыл бұрын
That won't be similar to gas turbine engine
@69mrnikolai2 жыл бұрын
@@celestialmedia2280 im simply talking about manufacturing. and to be able to put this process onto something like that would be a total game changer. every one makes gas turbines but no one has done a rocket engine like this
@FutureAIDev20152 жыл бұрын
Huh?
@bruhholmes2 жыл бұрын
Tesla Turbines did it better.
@paullangford81792 жыл бұрын
Any flying?
@bruhholmes2 жыл бұрын
@@paullangford8179 flying?
@celestialmedia22802 жыл бұрын
@@bruhholmes bro it's flying? This technique is groundshattering in our business , this cuts our 75% of majority execution of manufacturing But they have been patent already
@bruhholmes2 жыл бұрын
@@celestialmedia2280 I’m sorry, lmao what are we talking about? Hahah what is this technique, what is flying? Is it an object in the air we are speaking of, a state of completion or a technique in production? I am very confused
@K-Effect2 жыл бұрын
Wind turbines are the ugliest thing man has ever created right up there with billboards
@anuardalhar67622 жыл бұрын
We are talking about Gas Turbine here, not Wind Turbine😉
@paullangford81792 жыл бұрын
Wind turbines are beautiful, like giant sunflowers.
@celestialmedia22802 жыл бұрын
Wind Turbine are the most significantly simplest form of timeless beauty in form of design And u r saying it's ugly? Dhuhhh What r y on? Meth cocaine chars janja opoide heroine tablet weed feni
@denismilic18782 жыл бұрын
Of course, in contrast with a crude oil refinery, or a coal powerplant.
@pizza35122 жыл бұрын
I find wind turbines beautiful, but to each their own.
@blueactive30692 жыл бұрын
you are creating new boundaries which we avoid with single crystal casting ???? how you can come back to single crystal structure or you have hidden steps ?
@SafetyLucas2 жыл бұрын
I know Boeing was recently researching HIPing (Hot Isostatic Pressing) SLS printed parts to diminish the grain size and porosity. It's not as strong as single crystal though so I imagine they modified the design to reduce the material strength requirements or perhaps are only using them for the LPT section. Perhaps they are doing the same thing.
@erkintek2 жыл бұрын
this video is for bussinesspeople, not for enginners :D
@69mrnikolai2 жыл бұрын
@@erkintek too true
@blueactive30692 жыл бұрын
@@SafetyLucas could be but i think the whole technology going to be disrupted by electrification remember PV=MRT you can increase air temperature with electricity thousands degree without any moving parts ? temperature and pressure can proportionally increased ???
@regeman100 Жыл бұрын
@@SafetyLucas increasing efficiency at cost of strentg in LPT section makes much more sense than using this in highier temperatures. It is important to remember that turbines have many stages some of which doesnt need exceptionaly resistant materials. It is also possible that the material they used can actually get stronger from 3d printing process as new materials are invented every day
@pranav82682 жыл бұрын
Which version of NX is this?
@chandrew-do9xk11 ай бұрын
UG12.0 or newer are ok.
@chandrew-do9xk11 ай бұрын
NX2212,excellent
@twofacedmctwoface48762 жыл бұрын
We've been root cooling for 35+years... where's the innovation in that! And weve also achieved boundary layer pressure control...
@kaizenplm2 жыл бұрын
Thanks for the insights Twofaced McTwoface
@rkan22 жыл бұрын
What are you on about? This cuts like more than 50% of steps in the manufacturing process lol. That is groundbreaking in anything that is being produced.
@celestialmedia22802 жыл бұрын
This is groundshattering inovation, This cuts all the majority of 75 % in the execution of manufacturing
@zentriceggofficial2 жыл бұрын
When you don't understand the point of something and other people have to explain it to you.
@desaradhankumaran5122 жыл бұрын
Great.
@atleast2minutes9162 жыл бұрын
Video looks awesome. However I wish there was an audio or someone talking us through this video, such as what the component does and stuff
@sharylholt40383 жыл бұрын
g7i vur.fyi
@CAMER_213 жыл бұрын
How to setup workpiece like hold on vise or hold with clamps with supporting or with rigid support with bolts... And how to generate tool path that tool doesn't touches clamps/vise/bolt/bolt head.... Please make videos like..how to setup
@SURAJKUMAR-qz8pd3 жыл бұрын
Want to join
@CAMER_213 жыл бұрын
How to setup workpiece like hold on vise or hold with clamps with supporting or with rigid support with bolts... And how to generate tool path that tool doesn't touches clamps/vise/bolt/bolt head.... Please make videos like..how to setup
@ad3ddesigning7303 жыл бұрын
Very nice
@ai_designdevelopment62523 жыл бұрын
How to add this feature in system can u guide us plzzz...??
@memocontini3 жыл бұрын
Nx 11 have this texture module?
@joaopedropatricio60163 жыл бұрын
Dear all, How did you define the initial areas? Thanks