How old was that ram. About 7?

If you would place your feet at 12 (left foot) And 3 right foot Bend your left knee just a little And lean into the rifle just past your bent knee And then you can roll with the recoil Great video

Was that S3? I had that tag a few years ago and had to return it due to stuff that came up. It looks a lot like what I had scouted on Google Earth.

I’ve always wanted a 375 but couldn’t afford the H&H the Mossberg came along and I bought one some said it was plastic garbage but I thought it has to shoot a bullet I looked in the barrel and it looked like it had been shot at least 20 times it was filthy I cleaned on it for an hour and it still didn’t look all that good the crown look like shit wasn’t at all square and had carbon built up in it a new gun doesn’t have this anyway took it and shot it 5 times and it turned my arm purple it was way to light brought it home and decided I would keep it I took the stock and filled all the voids with fiberglass resin and fishing sinkers the back stock I stuffed wheel weights in it and brought the weight up to 11 lbs I fixed the crown I put hash marks on the iron sight so I could adjust it I don’t think I will put a scope on it because it kicks so hard shooting the Hornady 270 grain DGX it will hit dead center of the bullseye at 35 yards with the iron sights the barrel is still rough inside I may lap it eventually but it’s nice to have a rifle that will drop anything on the planet it has quite a bit more fpe than the 338 and about 200 fps faster than the H&H but more recoil.

how much did this cost you?

Isn't that isn't that called there Safari" instead of being part of the Patriot series? Maybe it is a patriot .

This is how all gun videos should be very nice job 💯👍

mossberg, and ALL rifles need a safety that locks the bolt close, otherwise ...walk 10 feet and the bolt is open, filled with trash, and the cartridge has fallen out.

A little less scuzzy but not in the white yet!

Great video! Windy! Beautiful ram! I was very lucky in drawing a Desert in Colorado, my first year applying. Deserts are straight lottery, no points used. I ended up with a small ram, but I could care less. Very very difficult hunt. I said I'm done sheep hunting. Two years later, I can't wait to draw a Rocky. I am obsessed with sheep now. You are 100% going to want to do it again.

My M18 in 308 feeds best with Russian PPU ammo, I was looking at a Howa 1500 rifle, the bolt breaks down like the M18 bolt.? are they made by the same company?.

very cool

The recoil isn’t bad at all. All of you were being dramatic and had horrible shooting form. Be funny to see you sissies shoot a real big bore.

Congrats on the great ram. I enjoyed watching your video. Last year I drew the one Colorado desert sheep tag it was a fun hunt and great experience also.

This would be nice with a muzzle brake for backpacking great 400 yard and under round

Savage 16FCSS is the true Weather Warrior. You can tell from the rifle mounted magazine release, metal magazine bottom plate and Accustock. Other Savage 16/116 with the cheap Axis plastic magazines and non-Accustock are not Weather Warriors. I have 2 Savage 16FCSS Weather Warrior rifles in 223 Remington and 338 Federal cartridges.

Great video, man. Been on the fence about this 375 Ruger. Some folks say it’s more powerful than the 338 win mag, which I own, but idk, that 338 slaps’em hard, but I can’t say for sure, having never tested the 375 ruger. Any input from you guys, and even y’all here in the comments, would be greatly appreciated. Just sub’d to the channel btw.

This gun would kill a Bigfoot.

Is for 7mm remington magnum?

I would of liked to see what kind of accuracy you got with it

I have 2 of these rifles one in 270 one in 300wm. Love them both

Wicked

Great job capturing the scenery and scale on video. Congrats on the sheep!

Looks like you still have a lot of copper in that barrel. Hoppe’s #9 is good for a deer rifle or a light use gun but these old military guns have a lot of rounds through them with usually not high quality ammo. I would use something a little bit more potent like gunslick foaming bore cleaner or solvent 7.62 bore cleaner.

Another question! What rifle caliber/build was used? Looks custom! Thanks again for sharing this great video!

So awesome! I like how excited he was after his first ram! And the line of saying, "I don't know if I'll want to do this again lol!" It really resonates the famous Jack O'Connor's quote, "There is no halfway.. After his first exposure, a man is either a sheep hunter or he isn't. He either falls under the spell of the sheep hunting and sheep country or he won't be caught dead on another sheep mountain." I can't wait to go on my first sheep hunt, being a first generation hunter, I've never had the opportunity to accompany my father on any hunts. He has fully supported me on my venture and I just hope I can go on at least one sheep hunt with him by my side! Congratulations to your son, I know this memory with you will be with him forever. I'm pretty sure by the excitement it brought him that this is his first of many! Lastly, did he draw this tag as a resident or non-resident? Great video, again!

Id call that more of an view than review. Nice looking rifle overall. The bolt is like the post 64 model 70 Winchester in the appearance of the extraxtor and lug arrangement. I like it but the detachable mag on this rifle is a sin. Ive got the Ruger Alaskan in 375 and prefer the control feed. Also got an Rigby 416 mauser and its an huge rifle with massive reciever. I find the small Ruger Alaskan much handier

Great Ram! Congratulations. Love to see the video. I have been blessed to take my Rocky and California in Idaho. Nothing like sheep hunting! My wife got her Rocky in Idaho. Now if only she could draw the California tag......

Good review. Might be the one I got out bid on gunbroker haha !

Good review 👍🏻

I also see you went by the mall and my house on the way

What unit is this in I am looking for sheep hunts in my home state of Colorado

I have this rifle in 6.5 prc it’s worked flawlessly so far and with 156 Berger’s its consistently shooting .75 or less at 100 .

Супер

Love those high country rams! Congratulations!

Nice job

The accu stock adds weight.

Awesome ram congratulations, how many points did it take you to draw the tag

My 110 storm which is the newer version of the weather warrior shoots lights out.

Glad you liked it and thanks for the feedback!

Thanks! So many videos on KZfaq review the Raven Pro, yet almost all are long-winded and rarely show the scanner in action at a reasonable greyscale level. Your video gets to the point quickly. MUCH APPRECIATED!

Yeah no

I have one, the extractor has to go over the rim of the brass, just push it hard. Edit: don’t mean to offend with the “it took me about a minute” I just like to manhandle my rifles and treat them hard.

With groups like that, it becomes harder to justify a $2k rifle... amazing.

1 in the chamber and 4 in the clip, if you have 5 rounds in the clip the action has to be open. My fathers 308 does the same although it is lever action instead of bolt action.

TOM DID YOU GET A REFUND OR ANY CUSTOMER SERVICE? Do you have an update I’m in the market to buy this rifle but need to know more

Truth is- I hope you tried this........ Mauser is very German. Not American. You can’t handle it like a Frenchman..... Mauser has very tight tolerances and the bolt locks in the barrel very tight. I own an m18 in 7mm. The bolt is tight. You slam it. You don’t finger it. You slam and whack. It fits tight and for me has been sub MOA. Will say, as time goes by- you don’t have to slam it, just firm. But when new, you slam it like your trying to detonate it.

This just happened to my brand new mauser m18 in 6.5 prc. I did finally get it to chamber after getting it stuck... Only chambered when applying brute force to the bolt or by leveraging the bolt by the knob. Sounds kinda weird but that outer torque was needed to reliably pick up and insert the round. Which seems likely that it's the extractor. Could also be a tight chamber. Calling eurooptic tomorrow to facilitate a return. I'll be sure to link this video.

Just hit the bolt with a hammer....jk. Ever find out what the problem was?

Checking this out because I just purchased one of these in 7mm RM on Gunbroker- 600 bucks new now. I suppose they are closing these out since the new Savage 110 Storms are out. Actually I like this stock profile better as I'm used to it with my Savage 10 and Savage 11, and I think the stock's cleaner looking without all the new bells and whistles I don't need on the new ones. Ammo will be more with this than my 308's, so this will be strictly a hunting rifle. Can't wait to see how it groups after breakin.