I'm a mechanical maintenance technician. I basically work with big and small mechines in plants which are automated , trouble shooting and repairing etc. I would like to learn more about programming plc's and physical installation as well. What is a good path to take?
@FATSNAIL-FPV5 күн бұрын
Same question for me. Heavy equipment/truck and trailer mechanic. My joints and lower back are reminding me daily to go look for a les physical job lol.
@myplctraining12384 күн бұрын
We have helped multiple maintenance technicians break into PLC programming jobs with our programs. Already being in a plant environment working with automated equipment gives you a big advantage.
@user-it5vd4nt8h16 күн бұрын
Very correct!
@pjtaze1218 күн бұрын
You're very right.
@user-vp7pw9ib5d4 күн бұрын
Tell why please
@germanzolansky944318 күн бұрын
hey beauty ❤
@ajoshdoingthings54119 күн бұрын
This advice seems more like the overall concept of "Doing Stuff"™
@myplctraining123813 күн бұрын
🤔🤔
@ripewhensoft974319 күн бұрын
100%
@andersnrregren908719 күн бұрын
Sad you ppl need to hear how basic work is done
@bravobooty210719 күн бұрын
It’s hard to care man
@roberdanger19 күн бұрын
This is how to quickly become severely underpaid in your job
@myplctraining123813 күн бұрын
🤔🤔
@patrickmiedema5019 күн бұрын
I try to but they keep telling me im not maintenance so stop fucking with the machines. 😂😂😂
@joemccallum71019 күн бұрын
Whoever made this has never been a machine operator in any factory.
@mouse254219 күн бұрын
i was about to say the same
@myplctraining123813 күн бұрын
🤔🤔
@Skibidi_Male_X20 күн бұрын
This is great advice I usually go in arguing with Management in wanting to be right. And I refuse to learn anything about the job
@myplctraining123813 күн бұрын
🤔🤔😄😄
@carloscesarcesario184120 күн бұрын
Hello, I would like your help, I need to do a project. The PLC, an FX3U, will send the MR JE C servo to rotate to one side a certain amount of pulses entered into a register on the Sankoom HMI, when it reaches the count, the servo returns to the value of 0. Could you help me with the pins of the CN3 connector and the configuration parameters in mr2?
@stephendgates17 күн бұрын
Carlos, sorry can't help with that at this time
@team_jeo23-TV22 күн бұрын
Yes i want to learn PLC
@josephdaquila247927 күн бұрын
Is there a balance between pushing forward and taking a step back when your brain is tired? I know automation can be go,go, go, but I don't think any plant manager or supervisor would want someone trying to program a system when they're half asleep. Let me know what you think based off your experience
@stephendgates11 күн бұрын
Yes, things can become a much clearer after good nights sleep. Sometimes you need to take a break.
@Jerseydude07Ай бұрын
Awesome program! And you work at your own pace.
@fade8358Ай бұрын
What program?
@myplctraining1238Ай бұрын
Learn more about our programs here: www.myplctraining.com
@user-vp7pw9ib5dАй бұрын
I'm student of automation but in Algeria
@mctiliАй бұрын
100% agree
@mansourbouchelouche262Ай бұрын
❤❤❤
@DukeOnkled2 ай бұрын
I'm an IT guy looking to pivot to learning electrician work, this algorithm data skimming shit is craaaazy.
@uncle_salty_36752 ай бұрын
my logix designer studio 5000 desn't have the st code option????
@ice93ac2 ай бұрын
Yes I want to keep learning
@paulwood34602 ай бұрын
Schneider Electrics’s EcoStruxure Automation Expert is the way forward 😮
@TheJoeMoneyShow2 ай бұрын
To much work
@stephendgates2 ай бұрын
😃fair enough, more opportunity for someone else I guess
@TheJoeMoneyShow2 ай бұрын
@@stephendgates they can have it I’ll bring power to it and make way more from being in the union
@kolayskyboy2674Ай бұрын
You should not do. Pursue Business😂
@TheJoeMoneyShowАй бұрын
@@kolayskyboy2674 doing PLC is for useless underpaid car plant workers and factory workers that try to be electricians
@ShrekDavid-uu7rb2 ай бұрын
Kindly drop a link to your academy
@myplctraining12382 ай бұрын
sure thing: www.myplctraining.com/academy
@ShrekDavid-uu7rb2 ай бұрын
Where do we start from
@ShrekDavid-uu7rb2 ай бұрын
Nice
@lebogangntlhabane55963 ай бұрын
This was honestly one of the best explanations for the use of a UDT. I have a question, how do I assign a UDT to a physical I/O channel, so hypothetically how would you link the Start_Button and Stop_Button to actual DI's?
@jeffreyhall11053 ай бұрын
I'm in a maintenance technician position. I want more training. Can I get more info.
@myplctraining12383 ай бұрын
Of course, start here: go.myplctraining.com/cppaccel
@lamarcustaylor48253 ай бұрын
Is there a way to access functional diagrams on different devices
@leonelsolis54113 ай бұрын
Do I need a high school diploma to start this program? I’ve been in the oil and gas industry as in electrician for the past 6 years and would like to learn more about to automation side
@luciddream2033Ай бұрын
Did my comment even show up? God I hate youtube
@nooodsweet6173 ай бұрын
😊 a kid is good give you that😊
@hermannelson4894 ай бұрын
hello. please do you have a vfd course ?
@Nicofish20234 ай бұрын
I will mention that if you already have rslinx in slot 0 for another project. To get rid of the virtual backplane you should go in configure drivers, select the old virtual backplane and click delete. This will allow you to allow to change rslinx slot number. Hopefully it helps somebody 😉😉
@myplctraining12384 ай бұрын
yep, good tip!
@Zain.2634 ай бұрын
Does us companies hires automation engineers from foreign countries like india pakistan
@josephdaquila24794 ай бұрын
I think thinking of the various different states of your system can be a good place to start
@Rain-DD884 ай бұрын
If you need to buy various brands of industrial automation products, you can contact me, ABB, Schneider, Siemens
@josephdaquila24794 ай бұрын
Once you get to code it should be all fun though!
@aemaaddaudi59215 ай бұрын
❤
@hadleymyron35035 ай бұрын
Promo SM
@josephdaquila24795 ай бұрын
Where did Trenton start?
@myplctraining12385 ай бұрын
Trenton, started as a maintenance technician I believe.
@josephdaquila24795 ай бұрын
Hi Stephen, Hope you're doing well! I see your marketing is more directed towards technician with have lots of experience with circuits and mechanical hardware presumably. If I don't have this background, but have more of a (knowledge) background in programming, would your coursework help fill that gap as well? Thank you, Joey
@myplctraining12385 ай бұрын
Joey, great question. We have had IT/programmers do well in our program before too. I do recommend some basic DC circuitry knowledge though. Hope this helps. Let me know if you have other questions.
@josephdaquila24795 ай бұрын
Do you think its possible to get an internship in the field even if you don't have an engineering or technician background?@@myplctraining1238
@tubedoode23455 ай бұрын
Where can I do this course. Are you running one.?
@myplctraining12385 ай бұрын
You can learn about our stuff at www.myplctraining.com
@garretappleton48475 ай бұрын
Good on you bro!
@chunky070119946 ай бұрын
not sure why you zoomed in before telling us to "click on the network icon down here", a bit pointless when you cut it out the video, lucky for me, i know what a network icon is
@PvPDrewOp6 ай бұрын
I am trying to get a start in the plc world. I already have an automation technonlogy certifiacte and I am wondering where to go from there.
@myplctraining12386 ай бұрын
Send me an email at [email protected] Will try to point you in the right direciton.
@RenataMachado-ed6xd6 ай бұрын
Legal
@salimyasini31005 ай бұрын
hmmm, white helmet....
@-esthetic_editx6 ай бұрын
I also like how to learn
@toddmorningstar42066 ай бұрын
Funny how this short does not describe what it is titled. "You'll become better at problem-solving" Yeah, no shit. How about explaining ways in which that skill can be applied for monetary gain?
@myplctraining12386 ай бұрын
Watch some of my other videos for the answer to that question.