Can you take a picture without the visor please? Going to use it on dropbar.
@celoratv3 күн бұрын
Its 145 or 155 mm? Thanks sir
@pedalpowercycling2 күн бұрын
Size: 260mm x 160mm
@davem35645 күн бұрын
great review many thanks, I purchased one of the back of this video, shame for the cost you don't get a bag for it thou..
@Rickristian13 күн бұрын
That battery design with connector inside mounting plate looks sketchy for water ingress...
@pedalpowercycling13 күн бұрын
You're right. It comes with a battery cover. I think it might be highly recommended to use it with any chance of water (before, during or after a rain).
@Rickristian12 күн бұрын
Id apply a good blob of goop in and around battery/plate/connector...
@pedalpowercycling14 күн бұрын
What's your favorite bike?
@josiahduca404416 күн бұрын
hello, ik this vid is 2yrs old but may iask what you think would be the perfect size for me? My head is 54cm and im still debating whether id go for the s/m or m/l
@pedalpowercycling15 күн бұрын
I don't know because some heads are more round and some more egg shaped. I'd probably go m/l and get larger pads (aftermarket) if necessary.
@josiahduca404415 күн бұрын
@@pedalpowercycling sounds like a good idea. thank you so much.
@pedalpowercycling14 күн бұрын
You're welcome! I really like the Solstice but have now moved on to the Giro Aries as my go to daily helmet. The Aries runs narrow.
@sauceNkicks19 күн бұрын
Shame it doesn't have a place to store spare chain links
@pedalpowercycling19 күн бұрын
I have a little bag I put "missing link" inside my seat pack.
@ugglyfaceproductions26 күн бұрын
I have a battery that won't take a charge. I think it's because the battery went dormant. Will this charger make my battery charge?
@pedalpowercycling24 күн бұрын
I don't think so unfortunately.
Ай бұрын
Amazing content, thank you very much.
@alexBobleeАй бұрын
are you still using it? How does it behave on long rides
@pedalpowercyclingАй бұрын
Yes it's my main saddle on my 29er mountain bike as shown in the video. The longest ride was maybe 5 hours and it was still just as soft in the end as the beginning. Still very comfortable.
@alexBobleeАй бұрын
@@pedalpowercycling thanks bro
@queenofcopasАй бұрын
Out of curiosity, what is your seatbone width?
@pedalpowercyclingАй бұрын
Thanks for the catch, I may have forgotten to mention it in this video but mentioned it in the Specialized power saddle video. Sit bone width: 110mm
@NoName-nk8scАй бұрын
Thank you for this review. I really like it. Also, I will buy this helmet soon!
@pedalpowercyclingАй бұрын
You're welcome, I hope it fits well! I've had it for awhile now and really like it.
@NoName-nk8scАй бұрын
@@pedalpowercycling Can you tell me how to know my bike helmet size ?? So I don't know what is my size and if will fit or no 😃😅
@pedalpowercyclingАй бұрын
@@NoName-nk8sc Measure the circumference of your head and pay attention to the width of your current helmet and compare it to this one. This one is much more narrow than other helmets. www.giro.com/p/aries-spherical-road-bike-helmet/100000000300000146.html
@steveindorsetАй бұрын
Good vid mate. Blessings from England. 🙏🏻😎👍🏻
@nikcrosinaАй бұрын
I have got an Edge 520 Plus and still have issues like that. I cannot for the life of me understand why every Bluetooth speaker or earphone can connect pair and connect in a split second apart from being too far away from the phone to stay connected through whatever might happen. Still, these blo*dy bike computers cannot manage to connect correctly every single time if they are sitting right next to my phone on my desk. Let alone out on a ride when I really am not in the mood to start fiddling with tiny buttons and 'wait' - like 10mins on the side of the road - before anything happens...
@robertgomuka6466Ай бұрын
Unfortunately, it doesn't have a flat screwdriver. And such screws are present in my bike, so I have to carry another tool. A pity. I'd consider another multitool for this particular reason.
@206MatiАй бұрын
Great video, thanks
@adrian_zombturtle148Ай бұрын
That care parked in the bike lane is so polite by leaving half enough space to get by
@vincechittendenАй бұрын
Thanks for posting this video. Just one question: which rear cassette did you use ? Was it Tiagra 11-34T ?
@pedalpowercyclingАй бұрын
Shimano CS-HG500 10-Speed 11-34t Cassette. Good luck!
@vincechittendenАй бұрын
@@pedalpowercycling Thanks. That's the one I just bought, luckily!
@SweatSquad31Ай бұрын
Thank you!!!
@brucearkwrightjr.9246Ай бұрын
Damn, when I saw this on the site, I thought it was a mess type something or other, but it is a bloody quarter inch plastic wave form of a ton of plastic sheets... Not what I was expecting...might return...
@pedalpowercyclingАй бұрын
You're right, it's definitely not mesh. The wavecell plastic is angled to a point at places and sometimes my hair snags on the wavecell when I remove the helmet. It varies per individual.
@marianunez2767Ай бұрын
Didn't know there was even such a thing!!! Awesome!
@TheJMT2012Ай бұрын
I'm stuck at the step after crank arm is removed. It's like the crank is completely stuck on the cottom bracket. Have tried rubber hammer, but only tapping it without too much force
@pedalpowercyclingАй бұрын
Do at your own risk: After the left crankarm is removed, I've placed a cardboard over the end of the crankset spindle (on left side) and gave it a few forceful taps with a mallet. That has worked for me.
@TheJMT2012Ай бұрын
@@pedalpowercycling thank you for the advice. I gave it another go with the rubber hammer with a bit more force and saw some movement and decided to keep going. It came out finally 😊
@pedalpowercyclingАй бұрын
@@TheJMT2012 You're welcome and Congratz! Glad to hear it worked. I've been a bit worried about hitting too hard sometimes but that has always done the trick for me.
@DemiGod..Ай бұрын
Looks like velo or bicycle just a preference as similar overall speed unelss you live in flat terrain. Have a recumbent trike, got fed up of being slow climbing so stuck a motor on it; now alot more fun as overtake bicycles up hills aswell as down hills
@pedalpowercyclingАй бұрын
Velomobiles are much faster on the flats than they are climbing. I too put a motor on a recumbent trike (have a video of it), it's great for commuting or taking it easy with the motor's help.
@27bikebrothers27Ай бұрын
lol
@dt76sf2 ай бұрын
Hello, Great video. I have Shimano Ultegra 6600 RD SS with 11-28 cassette. 50/34 Chainring. Will this extender allow me to run a 11-34 cassette?... 12-36? Your video is the best yet I seen to answer questions thanks!!
@pedalpowercycling2 ай бұрын
Thank you, your 10s 6600 could work with a 9s Shimano MTB rear derailleur. Try the alivio, it should with an 11-36 cassette.www.rei.com/product/182379/shimano-alivio-m3100-sgs-9-speed-rear-derailleur
@genemcloud41142 ай бұрын
I appreciate that you didn’t hide your mistakes making this a true learning video. Thanks so much.
@bucefalos2 ай бұрын
Those... Nasty... Nails....
@girishkumar13872 ай бұрын
how can we fix the saddle light attachment with saddle
@pedalpowercycling2 ай бұрын
What's wrong with your light attachment? I believe this one only works with compatible lights such as bontrager lights.
@ninjascoob17 күн бұрын
It looks like you unscrew the bolts then remove the plastic piece before trying to attach the light mount
@treydrier31692 ай бұрын
Translated: Its a piece of s--t. You couldn't pay me to put this on my bike. Not being a dick just being honest. It looks like garbage.
@Taoweiji2 ай бұрын
I just so happened to have purchased this exact same GLT from there company in Israel. I'm happy to have found this video, as you answer a few important questions....like how to power the device! I'll be installing this in Barney the (Quattrovelo) Legborghini.
@pedalpowercycling2 ай бұрын
Super cool! Could I ask, what is the largest cassette you can fit in Barney? Would it accept a 12s 51t mountain cassette? Is it only HG Shimano or could it fit microspline too? Good luck with your project. Mine still works!
@Taoweiji2 ай бұрын
@@pedalpowercycling That is a good question, but I do not know the answer. Barney has a Rohloff installed. In addition, he has a 350W Tongsheng e-motor. I bought a battery from Electrify Bikes and will be installing that as well. He is still in his crate he was shipped with from the factory & Velomobiel.nl's workshop. I haven't had time to unpack and get to know him yet. I hope to do that this next week ,as I will have some tome off from work. My other velo, Mint Sauce the (Milan) Legborghini should be arriving this week too. I hope to make unboxing videos for both.
@faqhue96362 ай бұрын
Thanks buds
@skyilah2 ай бұрын
Considering they want 95.99 , while mine costed 25 and came with all the adapters for every existing connector on the bike they are real blokes.
@pedalpowercycling2 ай бұрын
Mind sharing what charger you got? Thanks!
@bill78532 ай бұрын
excellent and very helpful review ..thanks from UK
@trevordoyle62652 ай бұрын
This was disappointing. You didn’t even finish. Useless video.
@vesanicu59782 ай бұрын
Does anyone knows if the same medium cage will work on Dura-Ace 7970 rear derailleur?
@pedalpowercycling2 ай бұрын
Unfortunately I don't know but hopefully someone does. Thanks for asking and good luck!
@JitinMisra2 ай бұрын
I ride a hybrid bike but bought a road helmet, is that a bad idea , should have I gotten a solstice ?
@pedalpowercycling2 ай бұрын
Shouldn't be a problem. A road helmet is better than no helmet.
@dariuszgorczyca55492 ай бұрын
TH-883
@bikingchupei24472 ай бұрын
what a journey, now i might not be so afraid to buy the 105 di2 and install it myself, still is so stupid that you can't wireless update the levers.
@metallicknight23 ай бұрын
What front chain guide did you use to keep the chain from popping off the front sprocket? Link?
@pedalpowercycling2 ай бұрын
Non-affiliate link: a.co/d/6CV6kAO
@Sniper03 ай бұрын
Why are you on wall😂 you look like your taking a magshot..
@al-du6lb3 ай бұрын
how important is it to use a torque wrench for the compression part? my 5mm hex socket doesn't reach inside the top cap..
@pedalpowercycling3 ай бұрын
I'd say it's important. Carbon fiber can catastrophically fail (e.g. crack) so overtightening would not be good.
@al-du6lb3 ай бұрын
that's what I was thinking. I'm going to order an extended 5mm hex socket. Thanks.@@pedalpowercycling
@kurtriedel32083 ай бұрын
Thank you your help.
@Artikulo713 ай бұрын
Can support 50t cogs?
@pedalpowercycling3 ай бұрын
Shimano states: Low sprocket Max. 42T
@ubaldoih98183 ай бұрын
My previous hub had a 9 mm entry at the ends and I noticed that it is smaller, it seems to me that it is 5 mm, I wanted to ask you if it is compatible with my suspension
@pedalpowercycling3 ай бұрын
This is approximately 5mm for quick release. I'm not sure what's 9mm and this most likely won't work. I've heard of 12mm and 15mm thru axles.
@ryanhoward82383 ай бұрын
Very handy. Thank you
@Ram-ts1kh3 ай бұрын
This is one of the best helmet reviews I have seen. I wish others reviewers and manufactures would post the helmet measurements. I was about to purchase this helmet but i have 2nd thoughts. Do you know if the giro Helios is just as narrow?
@pedalpowercycling3 ай бұрын
Thanks for the kind regards. I don't have the Helios so I have no idea. Good luck finding the perfect helmet for you!
@vulgar_rider3 ай бұрын
Now, we know how much cyclist were able to pair their di2)
@vulgar_rider3 ай бұрын
thank you bro, this video helps me)))
@pedalpowercycling3 ай бұрын
You're welcome!
@pluton0343 ай бұрын
Hello, for the water to come out do you have to squeeze it or does it come out just by sucking like the previous one? thank you!
@pedalpowercycling3 ай бұрын
You have to squeeze just a little harder. I suppose you can suck out liquid but if you're using insulated bottles, they're already stiff to begin with. I still have that cap shown in the video and it's still working well, no leaks.
@Crand0m3 ай бұрын
Thank you for uploading this. I had taken my cassette apart for cleaning and couldn't work out the order to reassemble. Saved my bacon!