Great Tips to Avoid the dreaded Smoke ⚡ ☣️ ⚡ Hope all is well your way my friend 😎
@GroundControl20411 күн бұрын
@@miguelsalami Same to you Mike, thanks for stopping by. 73
@georgio4810117 күн бұрын
Might be a dumb question, but here goes. I just bought a used 655hpc, already converted. Love it. Band A starts at 25- something and Band J goes up to 30- something. CB range sits nicely on Band D. My question is.. what was this configuration out of the box? Published ad material says a 655 is a 10 meter, 28-29 mhz. This all looks so perfect now, a-e, f-j, etc. What did this look like before conversion? Thanks, 7-3.
@GroundControl20417 күн бұрын
@@georgio48101 10 meter band and the 12 meter band before conversion sir.
@PhoenixRising25117 күн бұрын
Not that anyone misses hearing the "back to the bench" boy lol... Does anybody have an update as to what's happened to the Narcissist in the Dessert? I haven't heard as much as a peep out of him in months here in the deep southeast.
@YouAreAOldFartIf18 күн бұрын
Can you stop the APRS and have the radio Screen only
@davidatkinson626722 күн бұрын
The one i got has 95 watt PEP....LOve it
@GroundControl20422 күн бұрын
@@davidatkinson6267 nice, hopefully it’s 95 watts peak with a clean waveform on the oscilloscope. 73
@gordonlovett7122 күн бұрын
I have a problem with my 955 and hopefully you might can help me. I did the 11 meter conversion sometime ago and it has been working fine. I soldered the jumper on and held down the function and color buttons and switched it on, rotated the channel selector to HF, turned off and back on and all was good. However, some how when I was trying to modify a roger beep using the software and programming cord I have inadvertently switched the radio back into Ham mode. Everything thing looked good before I wrote the new program to radio but when I turned it off and back on it was back in Ham mode. Then I attempted to put it back into HF mode the same way I did the first time but I'm not getting the Ham / HF option anymore. The odd thing about it is that I can still get the 11 meter band but only when the VFO switch is selected. It's not really a big deal but I can no longer select channels by number but now by frequency only. It takes alot of turns to go from say 26.965 to 27.205. Luckily I can still shift the frequency jump from 1K to 1M with the function button. Sorry for the long post, I'm just trying to give you all the information on what went on. If you have any idea on how to get the radio back into HF mode I would appreciate if you can help. Thanks
@GroundControl20422 күн бұрын
@@gordonlovett71 have you tried to reset the radio back to factory settings yet? If not, this may work. Stryker is having serious issues with their software and unfortunately this has been a reoccurring problem for them that they haven’t fixed yet.
@gordonlovett7122 күн бұрын
No I haven't tried to reset it I think. I've tried all kinds of combinations of buttons and powering up. I just can't get the Ham - HF to show again. How do you go about resetting it? Thanks for responding
@gordonlovett7122 күн бұрын
Should I desolder the jumper when I reset it? Then solder the jumper back and see if that works?
@GroundControl20422 күн бұрын
@@gordonlovett71 Don’t desolder nothing sir. Just reset the radio to factory settings on the radio or you can reset to default by software settings.
@gordonlovett7122 күн бұрын
Good call my friend. Did the reset with the software programming and it cleared it right up. Everything back to normal but I modified #1 roger beep and lowered the SWR protection from 10 to 3. Thanks for your help and I subscribed to your channel. U Da Man
@user-vi6lw8dx5f29 күн бұрын
Hey GC 204, What brand name is your multi USB is that? Ty
@GroundControl20424 күн бұрын
Follow the link my friend. www.ebay.com/itm/402994355408?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=b3jhxsa8tzy&sssrc=4429486&ssuid=yjbo8mqdtp6&var=&widget_ver=artemis&media=COPY
@terrymeyer708429 күн бұрын
Please do this for the 447
@petertyrrell669029 күн бұрын
Several years ago I purchased one of these. Stock, it drifted too badly to be of any use to me. My basement is not really heated and temp can range from 16C to 22C, and exacerbated thermal drift. Eventually, I replaced the crystals and the crystal tuning network with a thematically controlled frequency generator, which I control with a microprocessor. Now I stay right on frequency. I do not use the internal switching power supply as it generates way too much heat, as Galaxy has provided no way to get rid of the heat. One day, if I can figure out a way to neatly punch holes in the outer casing, I'll add an extract fan. I do not like modifying the clarifier to address the drift issue as then, "everyone " is off frequency, I prefer to fix the cause. Thanks for the video.
@GroundControl20429 күн бұрын
Nature of the beast when dealing with Galaxy and RCI. They are drifters right from the factory, this is why I gave up on those brands. It’s either a Stryker, Yaesu or Icom for me sir. 73👍🏻
@pg86131314Ай бұрын
Why don’t they just do all that at the factory why would they sell a cb radio that’s not on the cb band wtf
@GroundControl204Ай бұрын
@@pg86131314 These are not CB radios my friend, they are 10 meter band amateur radios.
@701easternNorthCarolinaАй бұрын
I watched your video but I'm confused did you have to do a special tune that you didn't show to get that what to do 50 Watts on a.m. or does the radio come doing that kind of power once you do the frequency conversion? I've been wanting to buy one of these radios so I'm interested to learn.. hope to get a reply thanks
@GroundControl204Ай бұрын
There is an NPC switch on the radio that limits or opens the peak wattage. They are really clean at about 40 watts peak, but with a few adjustments 50 watts can be achieved and the waveform is still clean on the oscilloscope. They are decent radios for the price but I personally have no desire in owning one. 73
@gregmacklin9758Ай бұрын
This is great content. I just bought a Lincoln ll+ second hand in mint / refurbished condition from Walcott. They say they did a peak and tune package and updated the software. I hope that wasn't all snak oil. I really like this channel man !
@GroundControl204Ай бұрын
@@gregmacklin9758 Thank you for tuning in sir. 73👌🏻
@gregmacklin9758Ай бұрын
@GroundControl204 Any time, bro.. And while I got ya , how can a guy get ahold of you to get some work done.?
@GroundControl204Ай бұрын
@@gregmacklin9758 It all starts with an email sir. [email protected]
@gregmacklin9758Ай бұрын
@GroundControl204 Man, that's fantastic, brother . I've got a Texas Star 250 1992. I'm not sure if it's a good fit for the Lincoln ll + , but I won't mind sending the amp to you just to make sure it's working right.. Your contact is really appreciated on this end. I'm going to figure out the cloud and see what you think . A big 76 to ya.
@jerrypolverino6025Ай бұрын
Well well. Looks like I just found a new source to help me decide on a new radio for my second vehicle. I really like the way you shoot straight. I’m a retired airline pilot, 77, and just returning to CB after many years. No doubt about it, I am learning that I have a lot to learn. Right now, I’m running a President McKinley with a heater on vehicle # 1. It took me awhile, but finally I have a very tight, and clean signal. I run a Wilson mag mount. SWR is kinda high at 1.7. Looking at a new Stryker, or the new President for vehicle #2. Does Stryker have an auto squelch? Thanks in advance man.
@gregmacklin97582 ай бұрын
Man , i wish I had seen this sooner . Watching you has taken some of the mystery out of understanding the principles of the sine wave. Reading about is one thing , bit what you just demonstrated is worth a thousand words .you've just inspired me to get back into the hobby . I apriciate your excellent content brother.
@fireslayer262 ай бұрын
Is this not just a rebranded Vero VGC-N7500??
@GroundControl2042 ай бұрын
Yes it is a clone.
@ChristiannTyler2 ай бұрын
Good stuff as always! What’s your lead time on a tune up/repair?
@GroundControl2042 ай бұрын
I stopped all repair work 7 years ago. Tune ups, customization, and mods only. Most times I keep faithful to a 5 business day turn around.
@ChristiannTyler2 ай бұрын
@@GroundControl204 oh nice okay well I can probably just get the final swap it myself then have you work your magic so it pairs well with my amp if that works for you.
@cobra3603604232 ай бұрын
Do u sell these?
@GroundControl2042 ай бұрын
No sir, customers have their radios shipped to me from the retailer.
@travischapin8862 ай бұрын
Another radio fixed up properly and another job well done.
@GroundControl2042 ай бұрын
Thanks Travis, hope all is well brother. 73
@ChrisMillerOPMG2 ай бұрын
This looks like a copy of the VGC VR-N7500, but without the remote access capability that the VGC does.
@GroundControl2042 ай бұрын
Yes, it is a clone of the N7500.👌🏻
@commslinktv2 ай бұрын
Great job correcting that radio, they are good talkers. 73’s
@GroundControl2042 ай бұрын
Thanks for tuning in. 73🤙🏻
@Warlock4852 ай бұрын
I see u have a few new pieces on the bench
@GroundControl2042 ай бұрын
Yeah brother, got some other equipment too on the bench behind me. Getting things back together once again. 73
@stonecoldfyu3162 ай бұрын
My bother from another mother. I am glad you showed this as I have one similar to this and I just ordered a cheaper studio michrophone for a trial from Amazon. I have been using my d 104 with it and every one says I am load but wanted to be better sounding. It will be deli cred today and I will be on air with it hopefully this evening. I love the info from. You . Keep up the great work my brother. Airwolf in the carolinas, 73 's my brother. We need to get together so.e day.
@GroundControl2042 ай бұрын
Nice brother, you will have fun with the mixer and studio mic. Waving at you Airwolf and thank you for the support.👋🏻
@Ass_Burgers_Syndrome2 ай бұрын
Nice work. Wish I could get my junker 148 to look that nice. I have a question maybe you could answer. When I transmit on AM, my voice comes through the speaker. (like it would with talkback) SSB is not affected. Someone who wasn't 100% sure said it's one resistor added. But I don't know if they meant a resistor was added that caused the issue, or one should be added to make it go away. If I knew I could likely do it myself but I have no idea where to start. Person I got it from said it was "working fine and in great shape when he stopped using it last year" which is likely bullshit considering the condition it's in! It probably has been tampered with at some point, there is a non factory drill hole in the back but no switch or wires there. thanks!
@jerryhitt99912 ай бұрын
Where are you located. Do you do radio tunes for anyone.
@GroundControl2042 ай бұрын
I’m in the Washington DC area, and yes my services are for the public. Everything starts with an email sir. [email protected]
@ChristiannTyler3 ай бұрын
I have a few fatboy amps that could use a little upgrading.. those tiny wires get hot as hell in there and I’m getting some feedback after keying down on one of the 4 pills any of this something you’d be interested in working on?
@@GroundControl204 it said address not found when I tried to email you
@GroundControl2043 ай бұрын
@@ChristiannTyler recheck your spelling sir, that’s my only email and also I’ve gotten plenty of other emails already today so for sure this is my email address. [email protected]
@ChristiannTyler3 ай бұрын
@@GroundControl204 I emailed you no rush just curious if you received it or if it’s still not going through
@bobbywhitt88303 ай бұрын
Can the 955 be turned down enough to use with a Texas star 667v and still work properly?
@bobbywhitt88303 ай бұрын
Yes but it has a built in 2290 driver as well so they say keep the input low. Thought about buying a Stryker 955V2 but wasn’t sure if the newer ones can be adjusted down to be compatible?
@GroundControl2043 ай бұрын
@bobbywhitt8830 Oh ok, so you have the low drive version, which max peak should not exceed 25 watts from the radio. Yes, the Stryker can be turned down to meet those specifications.
@FREDGARRISON3 ай бұрын
Just got my KL703 today. You say to open it up and clean up any extra flux or solder. There's one of those stickers on the back of my amp that says the warranty is void if it is broken or missing. So how do I open the bottom without violating the warranty? So should I check it out first by putting it through its paces to make sure everything is working properly before opening it up? Just wondering,,, Nice video though.....
@GroundControl2043 ай бұрын
If you don’t want to void the warranty, just hook it up and have fun buddy. I’m just meticulous with my equipment before I power them up. 73
@FREDGARRISON3 ай бұрын
O.K. Much thanks for the reply.
@stevenorcutt39133 ай бұрын
I think I've only seen a couple of your videos so far so I haven't seen any repair videos yet. Is this something you do I bought a 2950 last year and found out after i got home that the previous owner had pulled a diode to give it wide open talk back. I would like to have the radio repaired and if possible get it tuned to work to drive my 667 cleanly.
@GroundControl2043 ай бұрын
I stopped repair work about 7 years ago sir. Now I just mod and customize radios.
@stevenorcutt39133 ай бұрын
@@GroundControl204 Cool I can understand that thanks for the reply 😁
@joeymccombs86833 ай бұрын
I have 2 HR 2510s original owner since 1989. I need tobget caps changed Posslly new Finals. 1 powers on but want key. The other want power on. Theey have been in storage onw since 95 the other since 2003. I didn't have a vehicle I could mount them in. (Full Console) I now have a gen5 4 runner I can do a nice dash mount. I love how you did this and the respect you had for it. DM the approx cost (worst case) to repair an re-tune both. I also want LED light conversion (RBG) if possible orange if not. I run 11M SSB.
@user-ub6zt9xl1o3 ай бұрын
the irf 520's are good for around 50 watts, irf 530's are good for around 70 watts and they are a direct replacement.
@orazioscardace9113 ай бұрын
Una ventolina e tutto ok
@RayTaylor-vx6gc3 ай бұрын
Hello. How do I get in touch with you to see about sending you a qt40 14:32
So what is the difference between this radio and the Anytone...? Looks and acts the exact same.
@GroundControl2043 ай бұрын
It is the same chassis and set up as the anytone Aries ll. Honestly, I prefer Radioddity. 73
@thelostboyscout14893 ай бұрын
I was thinking of digging out my Black Water hat. Now, I gotta do it. :)
@GroundControl2043 ай бұрын
Good eye brother, it was a pretty good priv sec company until… Well, I’m sure you know the stories. 73
@sleeve86514 ай бұрын
I'm confused ? @ 6:50 you said, " Two meter conversion " ? I reviewed it a couple times, and pretty sure that's what you said ? So how's that ? 🤔...?
@GroundControl2044 ай бұрын
It was a simple verbal mistake, most know I meant 11 meters concerning the conversion.☑️
@sleeve86514 ай бұрын
@@GroundControl204 O.K. understood ! Thanks ! Any thoughts on my second question, about the distorted receive on these President Lincoln 2 Plus radios ?
@GroundControl2044 ай бұрын
@@sleeve8651 If you could email me a video of exactly what you are experiencing I could help diagnose the issue better. [email protected]
@spudrubble4 ай бұрын
Wish my QT40 did 50 watts AM. My Nissei RS-27 shows like 13-14 watts but then again I don't know how to get more out or it.
@GroundControl2044 ай бұрын
It’s all about the tune up sir. 73👋🏻
@tonyhook86564 ай бұрын
Is there any reason I couldn’t put that resistor on a micro switch to be able to easily put it back to 10m ?
@GroundControl2044 ай бұрын
Unnecessary work because you don’t lose 10 meters after the conversion.
@tonyhook86564 ай бұрын
@@GroundControl204 ah ha. Perfect. Thanks for clarifying. That’s ideal. I’ll be using 11m now and 10m later. Awesome. Subbed. Thanks again bro.
@user-xo1vc9um1w4 ай бұрын
Can you mount a frequency counter on top of radio?
@GroundControl2044 ай бұрын
It has a built in frequency counter sir.☑️
@davewinston4 ай бұрын
good video
@GroundControl2044 ай бұрын
Thanks for tuning in sir. 73👋🏻
@bradyseitz28834 ай бұрын
How do you keep these radios from getting hot
@GroundControl2044 ай бұрын
When they are peaked and tweaked to the max is when these rigs tend to heat up too much, don’t use any technician that does not use an oscilloscope to tune radios. 73
@ChristiannTyler4 ай бұрын
What would be considered over volting the rm Italy? I have 2 power supplies a 14.5 and a 13.8 would you recommend running them on the 13.8?
@GroundControl2044 ай бұрын
Anything pass 18 volts is definitely not good for the RM3 mosfets
@ChristiannTyler4 ай бұрын
@@GroundControl204 thanks I don’t have anywhere near 18v I’m using a president McKinley with 203 driving a 4x2879c or I just drive it with the Lincoln and cruise it but I have a 2x2879c what would you recommend to turn my 2 pill into a driver? Would it be into an 8 pill?
@GroundControl2044 ай бұрын
@@ChristiannTyler Just to stay safe, 2 pill can drive the 8 pill but make sure the 2 pill has a variable and keep the variable all the way down and let that 8 pill swinnng brother.
@ChristiannTyler4 ай бұрын
@@GroundControl204 ooo unfortunately it does not have variable neither of them do so what are my options? I have a kl503 and 503hd but I’d prefer not to use those as a driver I like my Lincoln and Stryker as drivers into the 2 pull to get on 10 meter would I need to sell my current 2 pull and get a new one?
@GroundControl2044 ай бұрын
@@ChristiannTyler You could always send it to Gatekeeper, he’ll slap a variable on it for you. His link is below 👇🏻 youtube.com/@1883GotDown?si=YPSnRAzDtutYudMG
@troyroesch4 ай бұрын
Hell yeah buddy 👍
@J.A_522594 ай бұрын
I know you did this video a while back just wanted to say I appreciate it and I've adjusted my radio according to your specs and I've already had feedback from people saying by sound better so thank you very much
@GroundControl2044 ай бұрын
High five brother, thanks for tuning in and dropping a comment. 73
@troyroesch4 ай бұрын
👍
@GroundControl2044 ай бұрын
Thanks for tuning in. 73
@Ricks2Cents4 ай бұрын
*Can a Stryker SR-955h be Modified just a Stryker SR-655 can?* *Is there a Advantage one Vs the Other?!?*
@GroundControl2044 ай бұрын
They are both the same type of radio and have the same mods. But the 955 has sideband mode and the 655 is strictly for AM & FM.
@PopeyeKF4LBG4 ай бұрын
Ive come to the right place... 73 de KF4LBG
@GroundControl2044 ай бұрын
Thanks for tuning in sir. 73👋🏻
@DanielBearinOhio-ly4xe5 ай бұрын
I like the MFJ digital meter. Guess I'm going to have to order myself one now.
@GroundControl2045 ай бұрын
It gets the job done for sure. 73
@sgsjdmst5 ай бұрын
I have a lincoln 2+ in my Subaru Forester and I get a lot of static. What could be causing this?
@GroundControl2045 ай бұрын
Make sure that antenna is grounded to the chassis of the vehicle, use ferrite cores on power wires to the radio and wire the radio directly to the battery. This will help against static that the car’s electrical system can cause in your transceiver. 73
@sgsjdmst4 ай бұрын
@GroundControl204 Where do I find the ferrite cores for the power wires to the radio which you suggest?
@GroundControl2044 ай бұрын
@sgsjdmst Mix 43 ferrite is what you need. Amazon, EBay, RFparts.com