The cover is the most annoying part of the oil change. After watching your video, I went to Harbor Freight and bought a socket adapter for my drill. It made removing the cover and replacing it much easier and quicker. Thank you for posting.

Thank you for the video

Would this work on a 19 Transit custom European version?

Thank you !!!

Bought this stand for $15 at wally with free shipping. Pretty solid product.

worked for 2022 Transit connect

Thank you for this information. I will go pick one up.

Thank you!

Same raditor shutter for bronco sport?

I just got my stand today and looked at the directions and put them back in the box!!! LOL! I'm happy that I found this video! Thank you!!!

I got one today for $12. Probably should carry some compressed air cams and hand pump (harbor freight hand pump is $15) with you.

Thank you for this video. I busted the bolt on my mower blade and have been searching for something to get off Amazon that would do the trick. I am going to give this a try!

Hi! I can’t thank you enough. This saved my sanity putting it together!

Can the intercooler be replaced with the front bumper assembly on?

Thank you 👍

EXCELLENT HOW TO VIDEO!!!

Im not staying this will help a bad gun, a bad impact gun, is a bad impact gun. That said, your min. size air hose, 3/8". Coupler size, also 3/8." You need to give the tool plenty of air.

Since I don't live in a cold climate I never have used antifreeze. I have never had any problems.😊

Thanks ...ordering this week

Oh man, sorry. I assume you tried all the inputs and different hardware. As you know, if it's a display issue, it's not worth fixing. If it's a logic board issue, possibly worth fixing.

Perfect. Thank you,so much!

thank you!

Blackrepublic, dont be so ignoran! It definitely works? LOL Doesnt work on all problems!!! LOL works on some but not all!

Nice job

This video deserves more upvotes!!!

Thank you. This video just saved me $600. The mechanic was trying to pull a fast one on me.

Terrible video.. looks like you are learning as you go along. You should have practiced before so that you can give tips

Thank you so so so much!!

What battery are you using?

That's retarded in my armrest is always full

Well atleast on your 9th change you possibly won't have to buy more oil 😉 , thank you for good video!

Finally a car video that actually is helpful and informative....I appreciate you very much

Very helpful Thank you.

Thank you, for sharing this.

First off all great video bud. I was looking for my Ford Focus ABS sensor videos but found yours and watched fully as I enjoyed it. Few things though. 1. Not everything is supposed to click. That was the plug and adapter you were wanting to hear the click from. Like you plug the phone charger in the wall plug and it doesn't click right? It was the same thing with that sensor plug. 2. Always do step by step diagnosis. You realized the wire was faulty so soldered it and then went straight ahead to remove the new sensor and replace it with old one. What if the faulty wire and the original sensor both were the problems? Then you would have to replace the sensor again. Right? Always diagnose every step. 3. It can be a rat who ate the wire lol. Just a guess. Haha. But great and honest video. The struggle was real. What a great way to save that 150$ imo.

Your video gave me the confidence to tackle this job and I got it done ! Taking the whole front bumper and radiator support off made the job much easier. Thanks!!

Thanks great advice

Thank you for a great video on this 👍

These cars truly are junk!!

Thank u could not have done it without your video

Do 🍑 z takim tłumaczeniem po ukraińsku jest rosyjsku jest A po polsku już nie może być😡

Hey Try it yourself, your content is top-notch! Can I use it on my channel? I'll make sure to attribute it to you.

The very shiny side is the glass top and it has a label :this side up refering to the corrct side upward.

This side up is NOT the side to install. It jhas be the othe side? Am I wrong?

Slava Ukrani❤

Thank you!! Getting to the mechanic for one tiny bubble was going to be such a pain for me. I can deal with this annoyance to save some money and pass inspection.

Thanks ! I was about to order an entry keypad when I watched your instruction video. I feel foolish for not realizing I had the same ability to lock ,unlock my new Maverick with my phone. Again thanks!!!

I just had this same problem on a 2019 escape 2.0L Ecoboost. It suddenly happened and I was monitoring the temperature on live data beforehand and it was showing like 85C so it was not really hot but the temperature gauge was showing hot and I had that same overheat message. The temperature gauge would not go back down even after being shut off for a while. The coolant level was fine and the fans were running as this happened. The only way I could get the car to drive again (it was in limp mode) was to clear the codes. Then the temperature hand went back to normal right away and the car was driving perfect afterwards. Prior to this happening I was having a hesitation with a quick flashing engine oil light when I was starting out from a stop. Since this happened that issue went away. I’m not sure what the issue is with this vehicle as last week I had 2 codes for the 2 camshaft position sensors after getting a hesitation with the flickering oil light but that went away too. It seems I have some electrical issue causing problems. I don’t even know if changing this sensor will fix it.

Increase the air pressure if possible.

Found the fix, disconnect whatever you have connected to the usb port underneath the radio and it starts working.