I'm so upset with myself for buying this. The instructions say the receiver and sensor was paired in factory...then why doesn't mine work..smh. It would be great if the instructions showed you how to pair the sensor.
@juana38514 күн бұрын
I just bought this. Thank you for this instructional video. 💖💛💖
@nickmendezrico18 күн бұрын
Thanks a lot for posting this video...👍👍👍
@MfitumikizaHarunaАй бұрын
It' indoor leading or outdoor leading
@MengshenDirectАй бұрын
We think it's indoor leading.
@MfitumikizaHarunaАй бұрын
With hygrometer of indoor and outdoor which temperature leading can someone take important in the incubator
@MengshenDirectАй бұрын
Indoor temperature.
@AndrewNYJ3CKOАй бұрын
To do the exact opposite? Unpair the remote control? Thank you
@MengshenDirectАй бұрын
Long press the last key of remote for about 6s until alarm ring ""Bi"". Then press the third key once, alarm will ring twice ""BiBiBi"" which means the host alarm has delete all pairng connect.
@bradenmiller9916Ай бұрын
i got a two pack of these and out of the box one remote triggers both of the alarms and both remotes do this, is there a way to reset them? i know that its not supposed to do this because a family member got the same two pack and had no issues
@MengshenDirectАй бұрын
Hello, Please delete codes for one alarm, then pair one remote with this alarm. Delete codes: Long press the last key of remote for about 6s until alarm ring ""Bi"". Then press the third key once, alarm will ring twice ""BiBiBi"" which means the host alarm has delete all coded address. How to pair remote with alarm? 1) Use screwdriver and the blue tool to open the alarm, 2) Unload batteries, then load batteries 10s later, next long press the last key on remote control, you will hear sound ""Bi"", finally, press the second key on remote once, you will hear sound ""Bi Bi"", which means the pair is successful. Best regards, Mengshen
@ianmcklatchie43903 ай бұрын
I watched it and the only thing I want to know is how to pair additional remotes with bicycle alarm. That was hardly an instructional video. I watched it and I'm still baffled about how it's actually done.
@MengshenDirectАй бұрын
If you want to add additional remote control to use, you can do that like follows: 1)Take out the alarm battery. 2)After 2 minutes, put battery in alarm host and quickly hold on the remote control’s Learn button for 10 seconds and it will ring “Bi” which means the alarm host has opened learning mode and now release the Learn button and push Arm or Disarm button, the alarm host will ring “Bi,Bi” to hint success learning.
@lionel16323 ай бұрын
SUPER🤟Very useful✌thank you🤝
@MengshenDirectАй бұрын
You're welcome.
@BHAWANI816 ай бұрын
How to pair remote.
@MengshenDirect6 ай бұрын
Pair steps: 1) Load batteries for receiver(you can also use USB 2.0 micro-B Cable to connect receiver with PC) 2) Press ON/OFF button of the receiver for 2s to turn off it, then press volume button for about 3s, receiver will go into learning code mode, indicator is flashing. 3) Press one of the key of the remote control, indicator of the receiver will turn off, which means the pair is successful.
@ZYGTropicals7 ай бұрын
You didn’t even show what buttons you’re pressing! Worthless video.
@MengshenDirect6 ай бұрын
Sorry about it. The pair steps may be helpful for you: 1) Load batteries for receiver and motion sensor(you can also use USB 2.0 micro-B Cable to connect both of them with PC) 2) Press ON/OFF button of the receiver to turn off it, then press volume button for about 3s, receiver will go into learning code mode, indicator is flashing. 3) Turn on the switch of the motion sensor, indicator of the receiver will turn off, which means the pair is successful.
@user-BobbyM98648 ай бұрын
Can this be used on a front door by the handle for example ?
@MengshenDirect6 ай бұрын
Yes, easy to install on door by double-sided tape. It is sensitive and loud.
@MrTranquilini8 ай бұрын
Hello. How to unpair? I have 2 remotes that alarm 2 alarms. But i want each remote to alarm 1
@MengshenDirect6 ай бұрын
Long press the last key of remote for about 6s until alarm ring "Bi". Then press the third key once, alarm will ring twice "BiBiBi" which means the host alarm has delete all coded address. Then please try to pair remote control with each alarm, you can refer to this manual: m.media-amazon.com/images/S/aplus-media/sc/ff2ee009-cce8-47e6-b71c-7c3f563f41a8.pdf
@MrTranquilini6 ай бұрын
@@MengshenDirect thanks I'll try
@MengshenDirect6 ай бұрын
Any questions or requirements, feel free to contact me at any time.
@eddyboooy9 ай бұрын
Hi i have 2xtra remote from my old alarm that was stolen. How can i used the old remote to my new alarm?
@MengshenDirect6 ай бұрын
You can pair old remote with alarm(do not need to open alarm) Please refer to this PDF manual: m.media-amazon.com/images/S/aplus-media/sc/ff2ee009-cce8-47e6-b71c-7c3f563f41a8.pdf
@meowzic Жыл бұрын
Mine is not very sensitive, I really have to shake and bounce my bike until the alarm goes off.
@MengshenDirect6 ай бұрын
There are 10 levels of sensitivities, factory setting is the highest level. Alarm triggering is often related to vibration duration rather than amplitude There will be 2-3s warning sound when a first vibration is detected, if the vibration continues, alarm will be triggered and sound will last 30s.
@meowzic Жыл бұрын
So what level is the most sensitive the first beep or last beep?
@MengshenDirect6 ай бұрын
There are 10 levels of sensitivities, factory setting is the highest level.
@pirsensor1186 Жыл бұрын
I want only use sound no light how can i do that.
@MengshenDirect Жыл бұрын
There are 4 modes: welcome mode, alarm mode, colorful light mode and night light mode. You can press mode key to welcome mode or alarm mode. In addition, I recommend this remote control, it is compatible with this alarm kit: www.amazon.com/dp/B07THJWNHR
@siowyn Жыл бұрын
Hi is there a silent mode? Thanks
@MengshenDirect Жыл бұрын
Yes. There are 4 modes: welcome mode, alarm mode, colorful light mode and night light mode. You can set it to colorful light mode and night light mod that without sound alert.
@ido3733 Жыл бұрын
Hi! I placed the alarm under my bicycle seat and every time I ride my bike, after a couple of minutes it beeps 3 times if I sit (or put pressure) on the saddle, exactly like the beeps at 0:40. Do you maybe know what the problem is? If I just press on it with my hands it doesn't do the noise. and also, whenever it's in this mode id doesn't respond to the remote control, only a few minutes after I stop it responds. thank you!
@MengshenDirect Жыл бұрын
If you have used it for months or longer, I advise you to replace batteries and have a try. If there is still some issue, please just contact our seller for free replacement.
@crippleguy415 Жыл бұрын
So much easier watching this awesome video than trying to read the microscopic instruction it came with . 👍🏻 now how do I make sure each separate remote only triggers a single remote and not all 9 of my bikes ?
@MengshenDirect Жыл бұрын
Hi, original remote can only activate/deactivate its corresponding alarm, so you do not to worry about it. If you would like to use remote control A to control Alarm A and B at the same time, you need to pair remote A with Alarm B before using.
@hareriti2463 Жыл бұрын
this learn button is not working in my case, are there other methods or newer controllers?
@MengshenDirect Жыл бұрын
I guess the version of remote control is different. V3 version is old version which has rough surface in remote buttons, while V4 version is new version which has smooth surface in buttons. The original remote is the V3 remote, the new remote is V4 remote, they are not compatible.
@jducky3643 Жыл бұрын
What size is screw for replacing?
@MengshenDirect Жыл бұрын
M1.7x6mm
@antoniobadalucco6404 Жыл бұрын
Awesome video thank you now I can pair 2 remotes.
@MengshenDirect Жыл бұрын
It's my pleasure. Any questions or need, just feel free to contact me anytime.
@LindaCasey Жыл бұрын
My aIarm is beeping 3x fast, 3x sIow and again 3x fast .. what does that mean?
@MengshenDirect Жыл бұрын
I guess the alarm is under low battery condition, please replace battery then have a try. If the issue still exists, please feel free to contact us.
@LindaCasey Жыл бұрын
Which tone is the most SENSITIVE if someone touches the (in my case) car?
@MengshenDirect Жыл бұрын
The default is the highest sensitivity level. It has 7 level of sensitivities.
@marvindelrosario5699 Жыл бұрын
Good Day! Hello! Just to ask, how to pair an additional remote? Your other video isn't applicable to this kind of alarm which I have. Thanks much!
@MengshenDirect Жыл бұрын
Sorry for my late reply. Please refer to this video: kzfaq.info/get/bejne/bLp9ktWAvLmUY4U.html The process is totally similar though the appearence of remote control is different.
@MrJonbelt Жыл бұрын
Hi, I bought two pairs (each pair has 1 receiver and 2 sensors) off Amazon but I lost the user manual. How do I pair them all together in such way that all the 4 sensors will pair with the two receivers? Thank you.
@MengshenDirect Жыл бұрын
Please watch this demonstration video and have a try: kzfaq.info/get/bejne/o8moediDmKyRlHk.html
@MrJonbelt Жыл бұрын
@@MengshenDirect No this video is for one receiver and one sensor only. I have two receivers and four sensors.
@MengshenDirect6 ай бұрын
You have 2 alarm kit A and B, each kit include 1 receiver and 2 sensor. Please pair 2 sensors of kit B with receiver of kit A one by one, similarly, you can also pair all 4 sensors with receiver of kit B.
@zadahaluАй бұрын
@@MengshenDirect I have tried but it doesn't work, 1 sensor seems to work for 2 receivers but not 4
@nickthompson9192 Жыл бұрын
Hi. Can you pair multiple alarms with one fob ?
@MengshenDirect Жыл бұрын
Yes, sure. Please refer to this video: www.amazon.com/dp/B07THJWNHR
@gabby128bit2 Жыл бұрын
I can connect It with different model of remote?
@MengshenDirect Жыл бұрын
Hi, alarm can only connect with 2 kinds of remote below: www.amazon.com/dp/B071KF9ZG9 www.amazon.com/dp/B07THJWNHR
@oscarsbg5343 Жыл бұрын
I dont know why mine stopped working 😢
@MengshenDirect Жыл бұрын
Don't worry. We offer 12 month's replacement warranty. Just contact us directly on Amazon.
@jampantollano9412 жыл бұрын
how to adjust the sensitivity?
@MengshenDirect2 жыл бұрын
Sensitivity adjustment 1)Long press the the second key about 6 seconds until indicator solid on 2)Then press the last key once, the sensitivity drops to the next level...... press it again, and the sensitivity then drops until it returns to the first level sensitivity. 3) Finally you can press the second key once, the current sensitivity you choose will be saved. Please Attention: There are 10 levels of sensitivities, factory setting is the highest level 1.
@gevonnieharris79252 жыл бұрын
Exactly what I needed...thanks
@MengshenDirect2 жыл бұрын
You' re welcome! Any questions or needs about security alarms, just contact me anytime.
@johnbennet29432 жыл бұрын
If I bought two units, would it be possible to pair each fob with both sirens? i.e. could myself and another person each have a fob that controls both sirens?
@MengshenDirect2 жыл бұрын
Yes. Please refer to this video: translate.google.cn/ For example, Remote A can activate alarm A directly, Remote B can activate alarm B directly. you can pair alarm B with remote A, so finally you can use remote A to activate alarm A and B at the same time. Similarly, after process above, remote B can also activate alarm A and B at the same time.
@MengshenDirect2 жыл бұрын
Sorry, video link should be this one: kzfaq.info/get/bejne/bLp9ktWAvLmUY4U.html
@arunanchal90722 жыл бұрын
Can you show me step by step how to connect the remote to receiver
@MengshenDirect2 жыл бұрын
1) Load batteries for receiver 2) Press ON/OFF key for 2s to turn of receiver 3) Long press mode key for 3s, LED of receiver will flash 4) Finally, press any key of remote control once, LED of receiver will turn off, which means pair between remote and receiver is successful.
@arunanchal90722 жыл бұрын
I just purchased your product today What do I need to do to connect the receiver to the remote?
@MengshenDirect2 жыл бұрын
Please have a try. Any questions or needs, just contact me anytime.
@arunanchal90722 жыл бұрын
Can't connect receiver and remote as shown in your video
@MengshenDirect2 жыл бұрын
4 steps to pair Remote Control with Receiver: 1) Load batteries for Receiver 2) Press "Power/Mode key" of the receiver for 3 seconds to turn off it 3) Press "Volume key" for 3 seconds, receiver will flash 4) Press any key of the remote control, the indicator of remote control will turn off, which means the pairing is successful.
@arunanchal90722 жыл бұрын
I bought your product but can you tell me how to connect the included remote with the receiver
@MengshenDirect2 жыл бұрын
4 steps to pair Remote Control with Receiver: 1) Load batteries for Receiver 2) Press "Power/Mode key" of the receiver for 3 seconds to turn off it 3) Press "Volume key" for 3 seconds, receiver will flash 4) Press any key of the remote control, the indicator of remote control will turn off, which means the pairing is successful.
@mrvegas062 жыл бұрын
Thx a lot
@MengshenDirect2 жыл бұрын
It's my pleasure!
@albertedanan34092 жыл бұрын
How to pair it with other universal remote alarm
@MengshenDirect2 жыл бұрын
If you want to pair your remote with other alarm, please also refer to this video.
@nigoranigora93812 жыл бұрын
Nechpul
@podsada19772 жыл бұрын
Does the remote also make noise when alarm is activated?
@MengshenDirect2 жыл бұрын
Only alarm make noise, remote doesn't make noise.
@justinebrandsoncampo47852 жыл бұрын
How many range does it took?
@MengshenDirect2 жыл бұрын
About 15-20m.
@theartteacherdaniel50962 жыл бұрын
Would this not be to easy for a bike thief to just connect his remote and pair the alarm box and turn the alarm off
@MengshenDirect2 жыл бұрын
They must open the alarm if you would like to pair their remote with your alarm, alarm will be triggered and ring when he touch the alarm.
@theartteacherdaniel50962 жыл бұрын
Would this not be to easy for a bike thief to just connect his remote and pair the alarm box and turn the alarm off
@theartteacherdaniel50962 жыл бұрын
Please could you answer this.
@MengshenDirect2 жыл бұрын
They must open the alarm if you would like to pair their remote with your alarm, alarm will be triggered and ring when he touch the alarm
@allansinclair29212 жыл бұрын
Thanks so much for doing this short video. Saves so much time as nothing out there how to pair new remote for these very effective alarms. Would you no an alarm / tracker small enough to fix on the arms of kids glasses. Our 3 year old constantly loses her glasses around the house
@MengshenDirect2 жыл бұрын
I am sorry we do not have that small alarm at present. You can try to search "Anti-lost alarm" on Amazon to find one.
@monerroy72 жыл бұрын
I have bought this product but after few days it was just beeping abnormaly. Kindly help me. You guys don't have contact number?
@MengshenDirect2 жыл бұрын
Sorry for my late reply. Please replace batteries then have a try, if problem still exists, please try to pair remote with alarm, you can refer to this video: kzfaq.info/get/bejne/pJaEq6ueqc2XmYE.html
@monerroy72 жыл бұрын
@@MengshenDirect no the device was hanged. Just beep beep sound continuously when I put battery.
@MengshenDirect2 жыл бұрын
I guess you bought it on Amazon, please contact us on Amazon directly, I will send you item return instruction.
@monerroy72 жыл бұрын
@@MengshenDirect actually I have bought this product 7-8 month's past. So I have already many times trying to contact you guys but no one replied. Please inform me how can I repair this product?
@MengshenDirect2 жыл бұрын
Please use new Alkaline batteries to have a try. my email: [email protected]
@AndreiGrad0072 жыл бұрын
Can you add to alarms on same remote and to be activated in same time with one key remote?
@MengshenDirect2 жыл бұрын
Yes. For example, you have 2 kit of alarms. Alarm A with remote A, alarm B with remote B. You can pair remote A with alarm B, so remote A can control alarm A and B at the same time, remote B can be a backup.
@robblanorman71612 жыл бұрын
Jesus Christ cxould you hold the camera steady and explain what you're doing. This is not self expalnatory. What a shit device!
@MengshenDirect2 жыл бұрын
Sorry for the inconvenience. The video explained how to pair one additional remote with your existing alarm. Any question or need, please contact us anytime.
@tangyunyun37722 жыл бұрын
Hi,i lost my remote just want to know what can i do with my bike alarm on the bike.Is there possibilities that i can pair a new remote with the current bike alarm.Thanks in advance 🙏
@MengshenDirect2 жыл бұрын
Please buy one new remote control, then pair it with alarm before using. You can refer to my video: kzfaq.info/get/bejne/pJaEq6ueqc2XmYE.html
@zentreeno93462 жыл бұрын
how do you unpair ? for security reasons , to make sure it only has one key?
@MengshenDirect2 жыл бұрын
Unpair Steps: Long press the last key of remote for about 6s until alarm ring "Bi". Then press the third key once, alarm will ring twice "BiBiBi" which means the host alarm has delete all coded address.
@marvindelrosario5699 Жыл бұрын
@@MengshenDirect Good Day hello! Once it has deleted, how to pair another new remote? Thanks so much!
@MengshenDirect6 ай бұрын
you can refer to this manual: m.media-amazon.com/images/S/aplus-media/sc/ff2ee009-cce8-47e6-b71c-7c3f563f41a8.pdf