Very nicely done! Where are you located? I’m in Innisfil and we get lots of snow as well. Nice to see your Gen7 doing good in it. Can’t wait to try mine in the Winter wonderland 😊
@roadstar49922 күн бұрын
Also added that cheap $8 external gyro..i adjusted mine pretty low around 20%..its amazing how locked in the truck runs..
@mikesrccorner21 күн бұрын
Good call on the gyro! I still can't believe how good this is for the price and spending 40-50 bucks more can make it awesome.
@roadstar49921 күн бұрын
Yes ,i agree great design...i actually have the new race care version that uses same chassis ..i added oil shocks and upgraded to a 2845 5900kv surpass and went to 22t pinion from its stock 18t and 2440 4500kv...on stock 2s it went from 25mph to 40mph mph with ridiculous power...
@КАПИПАТРИК24 күн бұрын
Я тут один русский её покупать собрался и обзоры смотрю?😅
@mikesrccorner22 күн бұрын
It's a great truck! Russian or Canadian, you can have a lot of fun for an affordable cost. Thanks for watching my video.
@pertttikeinonen26124 күн бұрын
How big tires you have this video??? 1/14 or 1/16 size? Any link give it to me? Thanks.
@mikesrccorner22 күн бұрын
I borrowed these wheels from another RC. They are better but not great. If you really like this RC go and buy some nice wheels for it, it's worth it! I would suggest 1/10 buggy rear wheels for all 4 but it's up to you.
@gatisadams26 күн бұрын
Thank you
@vaaljanАй бұрын
Have had mine for about a week and its so much fun. Got it on Prime day sale
@mikesrccorner26 күн бұрын
Awesome! It's a great truck for sure and we love ours too. Thanks for dropping a great comment!
@kultus26Ай бұрын
Hi just want to ask. In your video you break the car at 10:17...is it normal sound and quickness of breaking process (pushing backward throttle on remote control)? Because when mine was new it was breaking super fast even from really high speeds it stopped almost immediately, but now it breaks like your one, slowly with that howling sound. Is it normal? My car seems dangerous at high speeds as the breaking is unreliable. THX
@mikesrccorner26 күн бұрын
That is going to be normal hearing it whine when breaking. If you double brake it goes into reverse so that would make it stop extremely fast. One thing I would check is your throttle trim. Make sure it's in the most neutral spot. You can play with it with not touching the throttle on the radio and dial the trim up so the RC begins to move fwd... back it off and keep going till the RC goes in reverse... once you find that range, trim the throttle to have it in the middle as best as you can so you will have proper throttle and braking. This RC is a bit louder than most at this size but it has a lot of metal which the cheaper RC are plastic. So it will make more noise. It's a great RC and with a little maintenance it will last a long time and have fun. Hope that helps. Sorry with a delay answer... I was away on vacation last week.
@mikesrccornerАй бұрын
It's been a busy, wet and humid summer. Lots of rain and thunderstorms ruining my RC plans at times but it's all good! Kids are off from school, I'm heading into vacation time along with my wife, we have a couple nice trips planned! When I get back we'll do 3s on the SG116 MAX, new Temu MT wheels on the 4wd stampede, 3s on the MJX hoonitruck, build a SCX10ii LCG rig with a kit from Aliexpress and there's always more new stuff coming on top! Thanks for watching and have a great summer too.
@jda79Ай бұрын
Will std scx10 ring and pinion work in these?
@angelikakurowicka7182Ай бұрын
Nicely done parcour you got there, nu BS just lots of fun crawlin. ;-)
@mikesrccornerАй бұрын
Thanks! Yeah it's fun to go crawl and try things out when you tweak your truck. Course keeps getting upgrades and built out more every now and then when I find time too, more to come for it! Thanks for watching and leaving a comment.
@jda79Ай бұрын
You did the video about getting the bdxrc axles but i dont see any follow up on it ever
@roadstar499Ай бұрын
I got one a month ago..added gold oil shocks to mine..its a ripper on 2s..3s ballistic..mine had a weak servo i replaced with a quality metal gear one..😊
@mikesrccorner22 күн бұрын
Awesome!
@kjetilpedersen583Ай бұрын
Nice video 📷😊 Thanks 🙏 for sharing.This car is great I have the same in my MJX Collection😊 Really good car for the Money 💰 And loots of smiles 😁 Onroad and It's Amazing to Drift Soo fast little Car😊
@magnusstoneАй бұрын
Hey there! Nice upgrade. Are you sure you order 2x rear sets and they measure 65mm eye to eye? The listing says fronts are 65mm i2i. And 70mm rear
@stevenbhagwandat2828Ай бұрын
Check the tires they are directional
@mikesrccornerАй бұрын
Thanks! I noticed in the video and switched them a while ago. Always appreciate the help though. cheers!
@adriano1501Ай бұрын
Olá, esse produto serve no MN128
@LockRockRCsАй бұрын
Sweet. If you ever get board with it just tell me. I'd like it.
@mikesrccornerАй бұрын
Hey buddy.... yes this one is right up your alley! I won't be parting with it soon though, lets just say that!
@Mini-z1994Ай бұрын
Nice find, got a vintage Tamiya Boomerang myself recently from the e-waste recycling facility we swing by almost daily at work. And on January 2nd this year, literally first day i was employed officially there with pay. A brushed stampede 2wd monster jam grave digger version with no bodyshell, missing servo saver & some screws missing. Had that up & running in no time with the stuff i have sitting around. Along with no radio, charger ofc but have since converted it to brushless with a 3s lipo i also found there not to long ago in the battery recycling box. Lipo is a bit worn as for it's size doesn't last very long. I get like 20 minutes out of it atm but it's not running hot at least hitting the 3.4v lvc.
@mikesrccornerАй бұрын
Awesome stuff! I always check FB marketplace and also drop by the e-recycle place most days, it's right across from my workplace. The owner is super nice guy too. As you know you'd be amazed at what people drop off. He gets something cool at least once or twice a week whether it be a computer or electronics. Thanks for watching and leaving a great comment. Cheers!
@dub2536Ай бұрын
I own half a doven Hyper Go's and I love em. I usually am driuving trucks off ramps and desire to attain backflips etc. often with the Hypergos even landing on all four wheels often the rear left shock tower would break. I eventually drilled tiny holes into core of tower then ran very skinny long self tapping steel screws that fixed broken shock towers. hardest part was finding those tiny long screws. I recently ordered my first 1/10 scale Hyper Go. cool video. Happy trails.
@mikesrccornerАй бұрын
Good stuff! I'm happy with the MJX brand too and they are tough. I'll admit I'm not that hard on my stuff and don't jump my stuff often. In a few years i'll have more free time and can get into wrenching more but I'm in the mode of keeping things working and running. Having 2 kids who like to RC it's charging batteries and making sure things are ship shape to run! I've been watching the vids on the new 1/10 truck. I think it will be good but the reviewers seem to have got first version for feedback and they'll release a v2 soon. We'll see it's gotten praise and concerns from all kinds of different RC channels. You have to pay attention, they get it for free so their review might be biased. Everyone is talking it's cheap but it's like around $330cdn and that's still a decent chunk of change.
@taxirly9147Ай бұрын
can you change the bodyshell? and change some of the parts?
@mikesrccornerАй бұрын
Hey! I gave this RC away to my son's friend so that family could have fun with RC. Not sure if it's still in running condition but he had fun with it and got more RCs since. Sorry I can't answer your question.
@dub2536Ай бұрын
I got one of these a few years ago with the blue sweep" body metal difrfs and dogboneas etc.Agreed. shocks suck, butreplaced em with oil shocks, n it helps. bang 4 buck, i love the truck. great video. o7/
@mikesrccornerАй бұрын
Thanks! I've done follow up videos on my channel with this truck with good cheap upgrades. Check em out! Thanks for a great comment. Have a great weekend!
@dub2536Ай бұрын
@@mikesrccorner I like 1/16 scale trux, and I tried out a Traxxas "LaTrax" Tetom truck which I enjoy, but I bumped it into a blue plue plastic squarev recycling box and the Tetom broke its front left arm. I drove my Sweep into harder situations and never broke an arm. I once drove it into a sewer and had to use a "snake grabing stick" to reach inton "clean" street sewer and got it out and its fine. One thing I do is cut the front lower body by 3mm because the wires for headlights get messed up from the front lower part of body. This is the car that got me into RC's. I will look into your follow up videos. ty. happy trails.
@mikesrccornerАй бұрын
@@dub2536 Awesome stuff! Thanks for the ideas... I will looking into that. Cheers my friend!
@Iq9000RamAhmadАй бұрын
I have the h118
@CustomRcGarage2 ай бұрын
👍
@mikesrccorner2 ай бұрын
Thanks!
@roadstar4992 ай бұрын
Which mjx car did those come off of? The hyper go 16th scale or the 14th scale truggy...you said buggy,but they would not be that big...thanks once i know what those wheels are i will order ..seems like it has even a wider wheel base which will make it more stable..thanks for sharing 😊
@mikesrccorner2 ай бұрын
Those did come with the buggy. But order something else with foam in it, there were only slightly better than stock.
@roadstar4992 ай бұрын
Oil shocks and a good metal servo made mine amazing..quality servos are extremely important..stock servo on mine was crap..
@roadstar4992 ай бұрын
Added good oil shocks and installed a higher torque 17gram metal gear servo,added heat sink to motor and its pretty much perfect now...great truck..still under $100 shipped with upgrades.
@mikesrccorner2 ай бұрын
Cool stuff!
@user-xl5ym9lp3qАй бұрын
What does upgraded servo do?
@roadstar499Ай бұрын
Made my car drive straight...the stock servo was weak and would not center well..car would go left or right when i let go of the wheel.
@mikesrccornerАй бұрын
@@user-xl5ym9lp3q stonger servo (more KGs) will make it center and stay centered. a weak servo the car will not track straight at high speeds. When you watch RC videos on the cheaper RC cars and the dude is driving it and it's veering left or right at high speeds, you know the servo in it is garbage (which is 75% of the time).
@mikesrccornerАй бұрын
@@roadstar499 yeah man the manufacturers usually cheap out with weak servos or 5 wire servos. GARBAGE and annoying. I always have a couple cheap amazon stronger servos on hand.
@incontrojoel2 ай бұрын
Cool course!
@mikesrccorner2 ай бұрын
Thanks for the compliment! I'm slowly building and adding on more when I have time. I'll do an update video on it soon with all the things I've done. Cheers!
@roadstar4992 ай бұрын
Also its easy to lower this truck by installing silicone sleaves inside the shocks..yes you will lesson the travel,but it will still be able to jump and land fine as long as you don't lower it to much,plus it will better on flats...
@mikesrccorner2 ай бұрын
Thanks for the tip!
@roadstar4992 ай бұрын
I actually ordered matching orange aluminum shocks when i orderd mine..shocks look great..but had no oil and even with 30 wt oil they are no better then stock..bouncy..so i ordered wltoys shocks from ali...my wl buggy shocks are great,so i am hoping for same results on ths scy truggy...mine even came with metal knuckles..its perfect on 2s and stupid nutty on 3s...will just use 2s on mine..😊
@mikesrccorner2 ай бұрын
Yeah the stock shocks are not great to say the least. I list budget friendly metal shocks in the video description and they come oil filled and work great. I have a video on it too. WL toys shocks will work for sure. 2S is great and everyone is bugging me to do a video on 3s. I will do it but I need to get to a big parking lot that's wide open. Coming soon I have a few days off soon I can get to it.
@andrew44032 ай бұрын
I do like the body style and the paint job. Looks pretty well made for the money.
@mikesrccorner2 ай бұрын
Hey Andrew. I agree! I'm pleased with it and leaving it as a drift truck. Something fun, battery charges quickly and the kids can use it. I don't think it will break easy if you leave it stock. Just what I was looking for. Reminds me of the pinecone series (SG 1601, 1602, etc...) Those are better on road experience and worth spending the extra. Thanks for dropping by!
@theRCcarshow2 ай бұрын
that's really awesome rc Mike
@mikesrccorner2 ай бұрын
Yeah man I saw this and I had to give it a try. It's really cool. I appreciate the comment too! Thanks for dropping by!
@mikesrccorner2 ай бұрын
Hot weather is here... the pool is up and running! And what better than to have some extra fun. This Kayak works so good it's a fun time. My second one just arrived last night so the kids each have one to race another. I'll have some floating markers for a course and we'll have a hoot. Thanks for watching and more great RC content coming up soon on MRC!
@RACEABLE2 ай бұрын
15 for the rc and 1500+ for the pool😉! Nice little toy!
@mikesrccorner2 ай бұрын
Hehehe true true! Pool was $500 though and it's our 5th year running it so it's paid for itself. By august though, the kids are done with swimming. lol. More time for RC boats! thanks for dropping by and leaving a comment. Cheers!
@roadstar4992 ай бұрын
Just got mine..any idea why i have no brakes..mine just goes in reverse unlike every other rc car i have...maybe theres a way to program the 2 in 1 rx/esc? I have another car from same manufacturer uses same radio and 2 in 1 with great brakes...any help is appreciated..😊
@KUPHSER2 ай бұрын
Was this the full size wild thing? From memory they were 3 sizes, or maybe 2? If the drivers head turns when you steer it’s the biggest fastest model wild thing. May mate had one when we were kids, I was not so lucky
@mikesrccorner2 ай бұрын
Hey! Not sure if the head turned. I generally scoop these up from my buddy who runs an e-recycle business. People drop off stuff and every couple months something like this shows. He saves them for me. I do a video (cuz I think it's cool) and put them on marketplace. They usually sell within the week as someone had one when they were a kids and now they can get the model back. I have a couple guys now I contact too, they like scooping up this stuff.
@KPtain2 ай бұрын
Nice channel Mike!
@mikesrccorner2 ай бұрын
I've been looking for a while for a cool drift RC. I had an old HBX 1:16 sedan style drift car which I reviewed here on this channel, it finally died last year. I have the MJX 14301 and the Team Associated 1/10 Hoonitruck, but I have them as speed runners and want to keep them that way. I was browsing my email and I saw this from aliexpress. I checked it out to make sure it was hobby style and decided to go on it. Here's the complete review. I must say I'm quite happy with the drifting for the price point. It's fun for sure and it can get around in tighter places like my driveway. My kids will love it too, they don't care how much it costs as long as it's fun! Thanks for watching and more great content and reviews coming soon.
@jimbest24482 ай бұрын
Not to bad at s or drift truck but not my style
@mikesrccorner2 ай бұрын
Hey Jim! It's a different aspect of RC and it's fun to drive. Hope you are doing well! have a great weekend.
@PERTHWESTOZRC2 ай бұрын
Thanks for sharing Mike 👍🏻 it does look like a close copy to those SG pinecone and Udirc models for sure. I think if the fitted a 390 motor instead of the smaller 380 it would get around 30kph. For the price though pretty neat RC overall.
@mikesrccorner2 ай бұрын
Hey Dave. I totally agree! I've already put the drift wheels on it and calling it a day. My kids are loving it and I have some batteries that are same spec, JST plug Li-ion packs around 900mah. Charge fairly quick and each can drive a battery pack out and hand off to the next one. Thanks for checking in here with a great comment. Have a good weekend my friend!
@roadstar4992 ай бұрын
I know mjx 14 th scale hyper go has 12mm hex's,but i thought these were 8mm...am i wrong? So these bigger tires fix right on with adaptors? Thanks for sharing
@mikesrccorner2 ай бұрын
These wheels are from the MJX 1/16 buggy and were a direct fit. I believe its 12mm. No adapters needed. These tires aren't that great but they are better than the stock ones.
@0410jjy2 ай бұрын
Is it water proof?
@mikesrccorner2 ай бұрын
It's not waterproof. Thanks Jay!
@jimbest24482 ай бұрын
If it's alright ģòòd To seett whmh what is going on in the sheď😂
@mikesrccorner2 ай бұрын
LOL sounds like you are doing fine Jim! Everything is going good here. Thanks for watching. have another cold one for me please 😜! lol. Cheers!
@AddyRCBuddy2 ай бұрын
Really big collection on there Mike. Love the shed
@mikesrccorner2 ай бұрын
Thanks Adi! Yes the collection has grown over the 20+ years of being in the hobby! Lots of fun. I need more time to drive them all! Thanks for coming by. Take care my friend.
@mikesrccorner2 ай бұрын
It's been a busy stretch over at my place celebrating birthdays and working around the house. It's a great time of year for sure! Catching up with what's going on in the RC Corner, I got some new items here in the video that you will see individual videos on, from a new radio system to LCG 1/10 crawler chassis, new chassis for 1/18 crawler and more! Just after I uploaded this video I had 2 new RCs show up yesterday and i'll keep them a surprise, other than to say one is drifting and the other is for the water! Stay tuned for some great RC content coming up soon on MRC! Thanks for watching!
@si_mirage2 ай бұрын
where can i buy its parts. I have one
@mikesrccorner2 ай бұрын
Sorry dude i took mine apart, saved some screws and parts, then threw out the rest.
@mikesrccorner2 ай бұрын
I saw a post in the Niagara Crawler FB group about a 1/24 outing with competition course setup and I cleared my schedule to go. I think this will grow in popularity and it's a lot of fun! Thanks for watching and more videos to come soon!
@jimbest24482 ай бұрын
Was hoping to see the belld8ragger on that course
@mikesrccorner2 ай бұрын
@@jimbest2448 It will be out there next time. I need to make a mod on it so the servo has clearance and gives it more shock travel in the front. My buddy Doug just lent me his dremel so I'll get around to it this week.
@jimbest24483 ай бұрын
Nice video Mike 😂
@mikesrccorner2 ай бұрын
Thanks Jim. Hope you are getting out to RC! Have a great weekend.
@TheMiller6077973 ай бұрын
Do you know where I can get a body for this car??
@mikesrccorner2 ай бұрын
Hey I seen some on ebay.com (in the US) but not sure if they ship outside of the USA.
@brianhawkins8663 ай бұрын
I purchased the austar and the one I chose I picked the one with the tires that's on yours but when I got it,it didn't have those tires on it,I'm not sure if they stopped making them or not,I want the Ascent so bad but I hate the body on the redcat,I thought about buying it and putting the austar body on it if I could
@mikesrccorner3 ай бұрын
Hey Brian... yeah I heard of some people getting different wheels. I know the JJRC C8801 or Kootai versions come with the black rims and different tires. Not sure if they are a second run from the manufacturer and they sourced those different wheels. Anyway I think if you like it you'll upgrade the wheels and rims anyway. The ones though I have are pretty decent and work good on the crawler course I built at my place. I got a playlist on this truck here on my channel, check it out and in the video description is a link to a facebook group for this truck. I think there's a couple hundred people in that group now and there's post on this truck everyday with what people are doing with theirs or asking questions/posting ideas. Hope that helps. Cheers!