Double headlights can get you killed as cars think you are another car far away at night.
@Ifeelgreyt17387 күн бұрын
Whats gonna happen to the ram intake?
@slashgilmour0021 күн бұрын
Can the RS 2023 use it? Thanks
@motodemic13 күн бұрын
No, sorry.
@slashgilmour0013 күн бұрын
thank you
@hgm833724 күн бұрын
I swapped out my H4. bulb for a yellow one, same voltage. LED headlights are shown to dazzle oncoming traffic, so they are not an upgrade imho
@motodemic13 күн бұрын
The dazzling you are referring to is when you add an LED bulb to the stock reflector. These are projector based systems so the lighting is going through an optic with much more control. That allows a much wider beam pattern that goes much further down the road. It is absolutely an upgrade.
@tomek0073325 күн бұрын
Pokaz jak swieci w ciemnosci
@VendettaFXR29 күн бұрын
I wish I would've found out about this instructions video prior to installing this. I figured, how hard can it be? Didn't see the 2 screws you included until after I was done, managed to strip a phillips bolt, and what took you 5 mins, took me an hour. Mostly because of that darn bolt. But end result was fortunately the same. 😂
@MrPlod999Ай бұрын
Is there a uk stockist
@motodemicАй бұрын
Sorry, we do not have any stocking dealers in the UK.
@jakobkristensen2390Ай бұрын
That is not a screwdriver; That is a man's left nipple
@viniciusrickert8355Ай бұрын
What about tue ram air, isolated?
@motodemicАй бұрын
The opening in the frame still gets direct airflow. Check out the many responses to this in the comments for more info.
@cloud98472 ай бұрын
I just installed mine on my 22' street twin. Absolutely love it. DEFINITELY pricey but seems to be well built and FAR brighter than stock
@FuriousGerbil52 ай бұрын
I got this setup on my 2018 and all I can say is I always have old heads asking what kinda bike that is and then see it’s a triumph and they just love the headlight look. Makes the bike looks like a cafe demon
@NB-ir1me2 ай бұрын
Why do they need to be 1 3/4" from the bottom triple clamp? I've done this conversion on my 2014 speed triple and have the motodemic fly screen as well, the wind is just barely too low, and goes directly up my helmet. If I just so slightly tilt my head down it completely stops the buffeting at 70mph. My thought is if I raise the light another .5 inches (give or take) it would make a night and day difference on highway comfort. I have the classic flyscreen btw
@motodemic2 ай бұрын
There are several factors to consider when dealing with wind, especially on a naked bike. Have you tested the wind with and without the screen or with the screen at different angles? It is definitely not a one setting/size fits all situation. To answer your question as to why the kit is located on the forks where it is - It has to do with the location of where the fork rings make contact with the fork tubes. The non-R model has long tapered sections on the tork tube, that is why we use shims. Our suggested installation height was to get the camps in the correct location on the taper for the diameter of the fork ring. You can move the brackets up as far as you can as long as the fork rings are still are still clamping. If you run out of clamping, then you would need thicker shims.
@Am0Am03 ай бұрын
Could you pur the cluster back on again after the install? Is it possible?
@matejslavik31833 ай бұрын
Where can I buy the adapter? I have the light.
@itskearny3 ай бұрын
Are there any of these left to order :(
@miatamadness95353 ай бұрын
How does this affect the bikes performance now that it's little intake is removed?
@motodemicАй бұрын
It is not affected at all. Check out the many responses to this in the comments for more info.
@davidmartin-pi6me4 ай бұрын
Hello, is it possible to mount the sentence of the Street triple 660 2020 on the street triple 660 of 2017, I thank you in advance for your response.
@motodemic3 ай бұрын
For the most part, those two models are the same. Only the headlight connection is different.
@qontrast10064 ай бұрын
This makes it look so much better shut up and take my money 😅
@motodemic4 ай бұрын
Do it 😎
@afiqafiat76614 ай бұрын
Ever try with ducati scrambler 1100? Any of this fit with it?
@motodemic4 ай бұрын
Sorry, it will not work on an 1100. Forks are a different size.
@afiqafiat76614 ай бұрын
@@motodemic how about the headlight socket? Can it fit 1100? headlight fork clamps i can get it from other brand..
@motodemic4 ай бұрын
@@afiqafiat7661 THIS conversion won't work, but we have Custom Headlight Brackets and all components are available separately. Please follow the link in the description and contact us so we can get you sorted.
@alessandrogiordano74995 ай бұрын
Hi. i noticed you did not connect the front position bolt. Isn't it necessary?
@motodemic5 ай бұрын
The front position is not reused because it is not needed in most cases. See at 1:12, where it is disconnected and then tucked away. If you absolutely need front position functionality, you could wire in the positive lead from the sub-harness going to the stock light to the red wire.
@alessandrogiordano74995 ай бұрын
@@motodemic I mounted a generic led one and the unique issue that I'm having is related to the handbar switches. The one I used for flashing the high light now turns on the high light while the one I used for turning on the high light turns off the headlight 😅
@dwaynthomassen42075 ай бұрын
Where can i buy the the headlight? Cancit be installed on street triple 675 from 2009?
@motodemic5 ай бұрын
Follow the link in the description. We do offer this conversion for the first gen 675.
@dwaynthomassen42075 ай бұрын
Do you gave a website where i can buy this headlight? And gauge?
@motodemic5 ай бұрын
Follow the link in the description 👆
@Johnnyreengo5 ай бұрын
is this the one that moves the beam into the turn?
@motodemic5 ай бұрын
Yes! Follow the link in the description for details and photos of the adaptive functionality.
@XlawSpencer6 ай бұрын
Now it looks much better
@boyzstuff12346 ай бұрын
Pointless vid without a comparison between old and new.
@motodemic6 ай бұрын
This is an installation video, it assumes you already have the product. Output photos are on the product page that is linked in the description and you already know how poor your stock headlight is 🙃
@gianfrancobarilari63956 ай бұрын
Dove si può trovare il faro?
@motodemic6 ай бұрын
Follow the link in the description 👆
@tommasofumisetto55317 ай бұрын
How many inches is the headlight? Thank you
@iamsa43357 ай бұрын
I like the windshield
@INFINITUM_TV7 ай бұрын
is this alowed in the EU?
@motodemic7 ай бұрын
Yes 👍
@takmutu4737 ай бұрын
Hey! Does this kit work on a 2016 Street Triple 660?
@motodemic7 ай бұрын
As far as our conversion fitment goes, a 660 is the same as the 675 or 765 models they were sold next to. With that said, It all depends on which headlights your bike has. Do your lights match the 13-16 675 or the 16-19 765?
@Serginhoz9008 ай бұрын
Não curti esse farol prefiro o de fábrica com as sobrancelhas 😁
@krzysztof_tactix9 ай бұрын
Is the LED lamp you are installing approved? give me the link
@motodemic9 ай бұрын
Yes! Link is in the description 👆
@krzysztof_tactix9 ай бұрын
Is this lamp approved and roadworthy?
@motodemic9 ай бұрын
Yes 👍
@kampanatthalangkarn22779 ай бұрын
Can I use this headlight with Triumph T100 black without modify cable?
@motodemic9 ай бұрын
Yes 👍
@francescovecchini9 ай бұрын
With this conversion you can also put on the original windshield?
@motodemic9 ай бұрын
Not on this model, but we do offer a flyscreen accessory. Follow the link in the description 👆
@calebaustin148610 ай бұрын
Will I still be able to put on a wind screen?
@motodemic10 ай бұрын
Yup! We offer a Flyscreen for this conversion. Follow the link in the description 👍
@JS-to9vc10 ай бұрын
I want but not for $720
@VinCode1711 ай бұрын
My 2023 SV650 looks amazing with the EVO S - this upgraded headlight really makes the front of the bike look awesome.
@JimmySnakes11 ай бұрын
Great video guys I know it's from a few years ago, but would this conversion work on the newest available Street Triple RS?
@motodemic11 ай бұрын
Still works on the latest RS 👍
@michaelb.4211211 ай бұрын
Well, I started and the screws in the headlight were SO tight, I just ended stripping them out and installing the old headlight. This SUCKS ASS.
@motodemic11 ай бұрын
The screws can be a pain, that is why we include a high quality screwdriver. Just to make sure, you are only removing the top and bottom scres as shown at 1:20. The side screws have red threadlocker and are very hard to remove. Since the top and bottom screws are not reused, you can technically drill them out and us the supplied screws with the upgrade.
@michaelb.4211211 ай бұрын
@@motodemic Oh !!! That's probably it. Threadlocker.
@Judgeshred8811 ай бұрын
This has made me wants a street triple now. The bug eyed headlights put me off normally
@MariachiPunoy Жыл бұрын
So nice! Can I find this headlight in Europe/Sweden? And what kind of gold forks is that? I have silver on mine XSR 700 from 2018.
@user-qh8xl4dv8k Жыл бұрын
Can you please provide a link to buy this light?
@motodemic Жыл бұрын
Link is in the description 👆
@jaromirbrancik9830 Жыл бұрын
Can you tell me where to get this light?
@motodemic Жыл бұрын
Follow the link in the description 👆
@charliei4030 Жыл бұрын
I can t find that instrument cover… its oem? I have an 797 but it looks way better
@motodemic Жыл бұрын
That is the OEM piece for this generation.
@mannyp1074 Жыл бұрын
Where can i buy everything you used in the video? I need it... please
@victormanuelcubero170 Жыл бұрын
De cuantas pulgadas tiene q ser el led para q entre en el de origen
@naps__4107 Жыл бұрын
It does change the look, but jeez man it's 2023 and they still don't get it??? Ridiculous
@Jakrabat948 ай бұрын
Well... The new 2023 Scrambler 800 has a LED headlight. But yea, oddly enough the 1100 doesn't have it though.
@felipeperezdecazarin8228 Жыл бұрын
El faro original redondo es lo que lo hacía una moto hermosa clásica de Ducati