Wow you are the best, thanks for your support... I'm telling you that I need to change the complete clutch kit, I don't know which one to buy, could you tell me which one is the correct one please?

Hello sir, could you help me tell me what type of oil I can put in the manual transmission of my Toyota Tercel 4wd? What quantity?

Hey where is this place i saw something I needed

Why Tercel? this is a Toyota Sprinter Carib AL 25?

Looked like a nice day for it

I love that you're passing $40-60K rigs and having way more fun! Keep at it!!

I just bought an '07 Camry. See you next year!

I know you will love this MG-MIDGET! I owned 2 Midgets. I loved the mustered color so much that I chose that color for both of my Midgets. My first MG-MIDGET was a chrome bummer 1072 model. My second Midget was the 1974 rubber bumper model like yours, except mine was the burnt orange color. I'm in my 70's and miss my carefree days of my 20's and my brand new MG-MIDGETS.

Damn, glossed over some of the best 😭😭

Hello sir, I have a question, to remove the manual transmission of a Toyota Tercel 4wd, do I also have to remove the engine? I want to change the transmission on my Tercel 4wd and the mechanic tells me that he has to remove the engine in order to remove the transmission. I want to know if this is correct?

I’m glad I got to make it to my very first Atom show it definitely was fun😀

Да, японцы умеют делать машины. 🔥🔥🔥

Thanks for taking a video of Atom, I didn't get to make it out this year, so I greatly appreciate getting to see it.

Always thought Tercels were the coolest little wagons. If I saw a crew of Tercels wheeling up my local trails I’d ask to tag along in my Tacoma 😂

How to make a tercel rust even faster 😂

My entire family learned stickshift on a 1984 sr5 Tercel 4wd. 7 people pounded that car for 15 years. The day my dad picked it up in the winter of 84' he took it drunk with a neighbor down the snowmobile trails in s. WI

Hello is for sale

Nice! I have a '77 Midget I rescued from a friend's garage. I wonder if you still have the factory electronic ignition, those were notoriously unreliable. It failed for the previous owner of my car, and I replaced it with a Pertronix when I resurrected it.

What I do know from having one of these cars and having gone through a similar flooded situation is that he is likely in first gear with his foot all the way to the floor. That engine is doing 123% duty to get through the bog. However, it WILL make it.

やっぱり、アメリカ🇺🇸🇺🇸の、国々に、現役で活躍されているのですね!!ちなみに、日本🇯🇵🇯🇵では、影も形もないですね!!

今から、綺麗に整備されるのですか!?

まだまだ、トヨタスプリンターカリブの、個体があるのですね!!もう、日本🇯🇵では、見かけなくなりましたね!!

thanks for this. So, a question: how did you manage to get to that lower nut? I can't for the life of me figure out how to get to it when i can't see it at all. I also couldn't see where you put the RTV - on the block after the gasket is put on or before? Thanks. I'm poor, old, female, and trying to do this myself. I have such great appreciation for mechanics now. You have to be part contortionist, and strong. I am neither.

国々によって、呼び名が違うのでですね!!トヨタカリブリピアというのですかね!!

ちなみに、どこの国ですか!?トヨタスプリンターカリブの、初代が、海外でものすごく人気ありますね!!

I have Toyota to sell 1983 overheat what should I check?

Another great vid...you guys have so much fun working on these cars together. Awesome to see that little 3A torn down and going back in. (LOVE the new 3A sticker). I've done my timing belt and water pump and cooling system refresh as well as a new clutch/flywheel machining back in 2014/15. (When I got the car, you could not let the clutch out without the whole drivetrain lurching like wild...it was way overdue to be done). I did not have the head off though so very interesting to see this teardown. I have a 6k pound scissor lift in my shop and I raised the car up....went out and cut five solid oak logs about 3.5 feet long and 18in dia., V-notched them with the chainsaw for the tires and dropped the car on them so I could drop the lift back to the floor and then dropped the tranny from below using a motorcycle lift sitting on a 5th log underneath. Def was some Houdini work but it worked quit well. Getting the input shaft of the trans back aligned with pilot bearing and such was a bit of a PITA, but finally got it after some angle adjustments with the tranny and some strap work. Seeing you do it with the engine out and back in was neat! GREAT vid!

That first bit looks a lot more like Yankee Boy Basin...weird. Most of Imogene from Telluride to the top, the drop-offs are on the passenger side. Are you starting in Ouray?

Привет. Классно покатались, тачки супер, я своего Кариба продал, кому продал очень довольны проходимостью. У вас в лесу также как и у нас заросли и поваленные деревья😊. Удачи и дальнейших побед в авто.

Thank you!!

This looks like a fun day.

there are very few videos of those toyota tercel on internet, i mostly see them in russia actually tons of them nice content btw!

Or….two priests and a rabbi walk in to a bar…..

The BMW needs far more lift

Hello, greetings from Costa Rica 🇨🇷, here we have a small club of these Toyota Tercel, we are surprised to see some new parts that you can get in your country, here in Costa Rica it is impossible to get new parts, only second-hand, I want to ask you where Do you buy new spare parts? Excellent channel 👍🏻

Cool love Tercel

Isn't that seal supposed to be inserted only to a depth of .22"? Did that bottom out on something or are you just eyeballing the depth?

You are Tercel Jesus

Welcome to the world of rubber bumpers. I also have a 76 midget. They are a lot of work, but well worth it.

Très bonne voiture 4x4 Robuste

Jesse, we have to cook.

That's cool old boy let you work on it!! Most people nowadays want you to drag it on a trailer and do more damage just to get it gone!!!

Did you ever check into the HRG lift kit.? I have a 1986 I want to lift a little bit!

My bad spoke to soon! I thought you were just using impact lol

Love your torque wrench 😂😂😂

Why not run the air lines under and into the bumper?? Had a 70 el camino with air shocks and it was easy to adjust and no holes in the interior!!!

I did this conversion a few times living here in Canada any Volvo after 1980 changed, when i did the conversion i opted for the glass units and could use replaceable Halogens Euro spec, not cheap , way better lighting at night time, you can't get them any longer which is too bad, 👍

Man These Little Cars where the BEST back in the Day, Right along with The Subaru Brat! NICE Video! I have found one of these behind some ones house North of me, its been sitting for Many many Years. Now I want to go see if I can Buy it! Trick it out Like its a Waste Land Warriors Car!! HELL YEA! Thanks All of you THIS LOOKS SO FUN!!!

great video, it just felt like hanging out. your expertise in these cars really shines - keep up the good work! i laughed way too hard at the ramp situation. took me 3 tries earlier tonight cuz i was holding back

I’m going to try this trail in a few months in my 57 Willy’s wagon.