The sliding clamps wouldbe better for the lifting Sven, as they are more compact and less likely to distort under load. The other clamps failed because of the extended length of the threaded part which was less able to withstand the load, it seems they deflected first and this caused them to slip.
@MiQBohlin4 сағат бұрын
Smaller are definitely stronger. I bet the clamp screw can be straightened.
@TikunOfanaim-ng2di8 сағат бұрын
A well for a Dagger board?
@michaelmovie9 сағат бұрын
She's starting to show some nice lines.
@christopherbrand53609 сағат бұрын
I am a fan of the change to the sailplan!
@kabuti283911 сағат бұрын
you cannot hurt that boat
@boooshes11 сағат бұрын
You could always go with a narrow chord dagger board forward that has significant depth capability. It doesn't seem you should have to be adjusting it continuously, so maybe going forward to reach through and adjust would be fine and you'd have alot of range to adjust the CLA. (This is just a consideration in lieu of a pivoting type to simplify things)
@SvenYrvindExlex4 сағат бұрын
A problem with that is that it will interfere with the sail in the up position
@boooshes11 сағат бұрын
Well, the boat is not fragile. No worries.
@mitrauz12 сағат бұрын
What matters is that you are not injured!🦾
@ryder607012 сағат бұрын
Strong hull! Was cool to see the bboat viewed from that angle. satisfying to overcome difficulties.
@melinda577712 сағат бұрын
Oh no! I'm glad yours is ok! ❤❤❤❤❤
@kdowensjr12 сағат бұрын
Dear Sven, Glad you and the boat are ok! Your scale model is one of the best balanced and simplest boats I have ever seen! I like its size, its sheer, its sail plan, and how it can sit on its keels and skeg. I miss those keels! It seems that removing them and using chine runners is forcing you to add the centerboard in the stern. Perhaps it is not worth the shallower draft? Kind regards, Ken.
@MiQBohlin4 сағат бұрын
As far as I understand the “centreboard” is planned to be up in the bow, not in the stern. The skeg in the stern will balance this.
@mattevans-koch935312 сағат бұрын
While it was accidental, the slipping and falling was an indication of impact resistance of the boat. Good to see no damage occurred to the boat and to you. Thank you for the update, sir and have a good evening.
@billotim12 сағат бұрын
So the unscheduled stress test was successful and better still you're not back in hospital with a broken foot or leg.
@DavidD696912 сағат бұрын
The plywood is slippery...I've always wondered about a front ruder facing back..
@SvenYrvindExlex4 сағат бұрын
It is epoxy that slipped
@FertanUK12 сағат бұрын
I'm sorry you had a difficult day.
@ryder607012 сағат бұрын
things happen!! without hurdles....we have no reason to jump! we look up to those who can jump high....do you see?
@TikunOfanaim-ng2di14 сағат бұрын
The scientists have now found out that bacteria carry and use molecule sized electric motors with huge geared axles to move around. Life is not simple.
@craigh338116 сағат бұрын
I feel it is an over kill on the amount of sails..enjoy your building and dreams of the future.
@stephanelaflamme88817 сағат бұрын
Could you put a small fix daggerboard in the front so you don’t have to build a box inside ?
@javierperezfernandez3353Күн бұрын
Hallo sir dont you think the deepth of the keel or so small, and is not good for the stability in big seas? thanks from canary islands
@SvenYrvindExlex17 сағат бұрын
I think it is very good. I sailed a chinerunner 2011 to Martinique. 2018 an other to Madeira. 2020-2021 The latest boat similar depth 150 days offshore in northern North Atlantic, no problem. It will be OK
@TikunOfanaim-ng2diКүн бұрын
What to do with noisy neighbors. I use earplugs, but it's not for everybody. Also, I guess old apartments distribute a jungle dance base beat better than my camping gear.
@kdowensjrКүн бұрын
Dear Sven, what was the reason for reducing the draft of the chine runners from the model?
@SvenYrvindExlexКүн бұрын
Less resistance and more shallow draft. The chinerunner is also a swim ladder. Now the step is not to deep
@mattevans-koch9353Күн бұрын
Thank you for the update, Sven. Have a good evening.
@mitrauzКүн бұрын
👌
@mitrauzКүн бұрын
I lake this work!🦾
@josephpotterf9459Күн бұрын
Thanks
@melinda5777Күн бұрын
You keep amazing me! ✝️🙏❤🇺🇸🇸🇪⛵👣🍍🤗
@ryder6070Күн бұрын
Heck Yeah! "Ideal Conditions" happy days:) Life!
@ximonoКүн бұрын
Nice job on the chine runners! I'm no expert, but a strong jigger sail sounds like a good idea.
@johnparsons9084Күн бұрын
Can’t wait to see you foiling on those beautiful chine runners!
@stephanelaflamme88817 сағат бұрын
😂
@johnparsons9084Күн бұрын
Looks great!
@1fishinghuman208Күн бұрын
Happy boat building.! 👍
@scottcates2 күн бұрын
Looks good.
@melinda57772 күн бұрын
It looks sooooo gooood! ❤❤❤❤❤
@melinda57772 күн бұрын
Been looking after Mom. Sorry I'm responding late. Your boat s looking so good!! ✝️🙏❤️🇺🇸🇸🇪⛵️🪴🍊🤗
@melinda57772 күн бұрын
CAPTAIN SVEN, HAPPY 85 1/3 BRTHDAY! Your 2 1/3 older ta my Mom! ✝️🙏❤️🇺🇸🇸🇪⛵️🪴🍊🤗
@melinda57772 күн бұрын
Cap'n, things are looking good! ❤❤❤
@boooshes2 күн бұрын
Thank you sir
@robvannNS2 күн бұрын
During WW2 my grandfather made a wooden tire to replace the rubber one as rubber tires were no longer available. Cheers.
@hugin-bb6cz2 күн бұрын
Thanks for the update, Sven! Is it possible to add a bowsprit and mount the bowboard in front of the boat?
@SvenYrvindExlex2 күн бұрын
It is not practical
@ximono3 күн бұрын
I think there should be an honorary pension for people who have given others inspiration and joy. You would totally qualify for that!
@SvenYrvindExlex3 күн бұрын
Good idea.
@oscar11073 күн бұрын
Will you still be able to beach the boat without ruining the chinerunners?
@SvenYrvindExlex3 күн бұрын
I am making the chinerunners strong and the boat is not very heavy.
@ChrisSzulwach3 күн бұрын
Possible to just make the chinerunners deeper instead of adding complication to the boat?
@SvenYrvindExlex3 күн бұрын
The bow board have a purpose. Moving the center of lateral area forward so that I can make the rudder deeper. Making the chinerunners deeper will not achive that.
@jeffoneill34293 күн бұрын
What do you like to eat for your one meal a day? (If it wasn’t a one time thing)
@carlanderson41393 күн бұрын
He had a video on what he eats at sea. Muesli and sardines I think it was. He showed his recipe for muesli and how he package it.
@SvenYrvindExlex3 күн бұрын
Muesli and sardines
@andreascarlberg39984 күн бұрын
Looks smart on soft ground. I wish you well.
@ximono4 күн бұрын
Happy 85 ⅓ in the Gregorian calendar! Grattis 🥳
@mikaelfransson36584 күн бұрын
Love it❤!!! /Mikael PS. Calcylate on 3 liters a days!
@SvenYrvindExlex4 күн бұрын
For more than 50 years offshore 1 liter a day have been ample. No need to restrict myself
@richardwennberg4 күн бұрын
👍👍👍
@NavigateNest4 күн бұрын
Happy birthday Sven! Keep up the great work. Ive been really intrigued by your manifesto. Especially your insights on how many people misunderstand life. I came across it on your website and would love to hear more about your perspective on this. If youre up for sharing, Id be excited to see you dive deeper into that topic in a video. Looking forward to the next update on your boat! Cheers!