well, we'll never know what really happened, bro got picked off by a sniper
@AntonioDaddio75Ай бұрын
Yes it works. Have been using it since I upgraded the video.
@ICONFESSONEBAPTISMАй бұрын
@@AntonioDaddio75 yeah man I done the same thing, seems the teeth on the smaller cogs wear down over time so they don't push either side into the main big cog fully allowing it to slip, hence the weakened power, so doing this fixes the issue however they will wear down again over time quicker than usual so it's better to order a new one for when it fully shits itself, or order a couple of those smaller cogs to put in the old trans. But yeah good trick, most people at this point would just get a whole new trans. I had to cut the gasket paste with a razor blade, it was hard to open it up but glad they put a wedge on the side so you can pry it open without damaging the faces. Not gonna lie it's really awkward to get into the trans and awkward to put it back together again, almost needed a second person to help lol... anyway big thanks
@DanBee1232 ай бұрын
Im a knucklehead as well and for a long time didnt bother with full gear but my friend please at the bare minimum wear some eye protection
@USMARSHALL20114 ай бұрын
I’m guessing it was a fail
@user-de3mg1hg5l5 ай бұрын
XR is the only good one
@HappyRZRrider5 ай бұрын
I have these ramps too. I like 'em !!
@HappyRZRrider5 ай бұрын
Thats the reason for 8 foot beds. Get 'em in there, set the brakes, and close the tailgate.
@klesko555 ай бұрын
You left us hanging . . . Did it fix your problem?
@Martinruizthemerchant6 ай бұрын
I bought this set it was my first Dewalt tools I don't like that they add some brushless and the rest brushed they give you the old 885 and 771 set I have upgraded my driver and impact already to 845 and 779 over all not a bad starter set but wouldn't recommend buying this buy them one by one instead
@anishkumar-si3yk6 ай бұрын
0:01
@anishkumar-si3yk6 ай бұрын
0:02
@nadakidd6 ай бұрын
Those gloves look even more comfy than my BM88 :)
@nayefalkurahi33576 ай бұрын
I mad a similar one today and that ting bent lol was trying to lift a 4000lbs trailer 😅 😂 tried it on 19ft boat with inboard motor prob weighs around 3500lbs and couldn't move it.. it barely lifted it and the bottom part of the dolly bent!!
@TheTreasureHuntingKH6 ай бұрын
i am new to magnet fishing hobby please support me channel : kzfaq.info/get/bejne/iM-RraZeyLnZg30.html
@damonshort24966 ай бұрын
I cant get it to work, i got the heater, 20lb tank conect the 2 and nothing so ima just give up on dis
@sadkiwifruitboy92196 ай бұрын
come on man we have to see it run now
@AntonioDaddio756 ай бұрын
Chainsaw muffler mod sound and speed test on ms 261 (John walker muffler) kzfaq.info/get/bejne/g8VzmtRisbiWl6s.html
@adrianstefan236 ай бұрын
👌👌👍👍
@imretoth23416 ай бұрын
🤣👎🤮
@White_devil19807 ай бұрын
Do you have to do any re calibration for a longer bar?
@AntonioDaddio757 ай бұрын
No modification
@memoorozco66457 ай бұрын
brand folding ramps??
@AntonioDaddio757 ай бұрын
Cargo master
@jeff0nyschuk6707 ай бұрын
I will put my Homerlite XL76 up against you. Opened up ports.intake and exhaust and a sniffer pipe,,8200 rpm..😮😢
@Buddha-of8fk7 ай бұрын
I like a longer bar so l don't have to bend over much. It's a old fellow trick.
@stevengonyaw16177 ай бұрын
I converted my 261 to 3/8 bar and chain. Now my 261, 362 ,and 400 m tronic all use the same bars and chains
@user-le6tr3go5o7 ай бұрын
Where did u get the correct 20 inch bar to fit on the 261 ? What size chain ?
@user-le6tr3go5o7 ай бұрын
Is this a slighter bigger chain size on the 20 inch bar then standard? Where do u get a 20 inch bar to fit the 261?
@MrBaptiste0037 ай бұрын
Chain full chisel or semi chisel rm or rs chain?
@AntonioDaddio757 ай бұрын
Super/ rs /20 in bar
@MrBaptiste0037 ай бұрын
Thank
@kacper35017 ай бұрын
I have the impression that this diameter is too large
@koneyisland14327 ай бұрын
What precious meek fawns ❤
@adrianstefan237 ай бұрын
👍👍👍👍
@FLYGUYMTWC7 ай бұрын
Nice to see someone cutting hardwood instead of pine.
@christopherfalconer92657 ай бұрын
I bought a T splitter and heater mounts to tank much easier
@chriscolvin26407 ай бұрын
I am a firm believer on chaps,, I love my 261 bucks a lot of firewood heats the home here in Pennsylvania
@Jon_REDACTED7 ай бұрын
Aaaaaaawwwwwww so cute and precious ❤ glad the babies are okay
@maxpinson50028 ай бұрын
Yeah I know Late to the game I've witnessed this before, and the warden was showing tremendous restraint to keep from telling me that I was F.O.S. I could tell he sure wanted to
@slowb4lls19 ай бұрын
Now this my kinda guy/ fix lol. That’s exactly what I prolly would do also, then there’s everyone else who’s like poindexter and be like that’s not correct it needs a transmission blah blah. And then there is us who wanna understand okay it ain’t working right so why not, good stuff
@bushratbeachbum9 ай бұрын
No footage of it in use?!
@AntonioDaddio759 ай бұрын
It’s in action in this video thanks Stihl ms 261 c-m bucking wood kzfaq.info/get/bejne/mrtkrJmZq5nJYZc.html
@jeffsmith1830 Жыл бұрын
Did you turn up the oiler? My 261 came from the dealer with a 20. Uses oil, but not as much as my 026 with a 20 inch.
@AntonioDaddio75 Жыл бұрын
Yes to the max
@dmaxrobful Жыл бұрын
How did this fix work for you?
@harveyexum Жыл бұрын
is this a honda forman?
@giovannisersale2925 Жыл бұрын
che catena adoperi?
@colindriedger7158 Жыл бұрын
Seems to handle the 20" bar well, any mods done to it or just stock.? Considering putting a 20 on mine...
@AntonioDaddio75 Жыл бұрын
Stock chainsaw
@sarahtodd9994 Жыл бұрын
Ma
@kenw9681 Жыл бұрын
Brute Magnetics has recently said that their 3,600 pound magnet is actually a 4,250 pound magnet, and they have done various tests that demonstrate this. This means that each side of this magnet has a magnetic lifting force of 2,125 pounds, instead of 1,800 pounds. But if you still have any doubt about this, get on their website and send them an email about this, to be sure that your 3,600 pound magnet, that you bought in the past, is actually one of their 4,250 pound magnets. If you don't already have it, seriously consider buying it now as it's probably one of the strongest neodymium fishing magnets that you can get at this time.
@RussellHoughton Жыл бұрын
I was just given 2 of these. I think one will become my backup saw.
@brianbelchuk9612 Жыл бұрын
Nice
@johnanthonyalberola6252 Жыл бұрын
CAN U MAKE AND MALE ME ONE YUR IN BUSINESS
@karminhoffman1468 Жыл бұрын
Supaman. Is that his track?
@lapalmeal Жыл бұрын
Awesome ,not what is that black flange? And where did you buy it. I would recommend using a filter and a hose with a regulator. Aftermarket stands are available which are more more stable.
@benvasilinda9729 Жыл бұрын
The 20” is better when using it on the ground but the 16-18” is great when up in the trees. This and the the MS200T are the only ones I use up in the trees.