Hi, I am also making a S550 hexacopter using pixhawk 2.4.8. I am using a R9MX OTA receiver and X9D plus 2019 Taranis transmitter. I am able to spin my motors using pwm channels of receiver but when i am connecting the receivers SBUS out port with the RCin pin of pixhawk the motors are not spinning. When i am switching my transmitter on and it connects with the receiver, the pixhawk is showing an error sound like it is in your video at 36:48 minutes. Can you please help me with this? How can I contact you?
@RakishRcКүн бұрын
@@karmayogi5531 hi, so are you sure the signal wire on receiver is on sbus out and not subs in? Secondly the signal wire on rc in Port of pixhawk is connected to the bottom pin and middle being power and top being ground so the order of wire is correct? When you hear the alarm sound do you see the error message on mission planner hud screen? If the above steps are correct then it's mostly like the sbus protocol for receiver is not set correctly in radio. Do you see channels active in receiver menu of mission planner?
@karmayogi5531Күн бұрын
@@RakishRc yes, whatever you said, I have done all these things correctly. I am able to arm the drone but motors are spinning automatically, i am not able to control the motor speed using transmitter throttle stick. I have calibrated the radio transmitter again and all the channel bars are moving...this means pixhawk is receiving the SBUS signal from transmitter through receiver. I think there is some settings I need to do in mission or in transmitter to take control of the flight controller. Can you give me your whatsapp no. or any email id?
@ericrchobbies16105 күн бұрын
Nice 👌
@kojiodo33718 күн бұрын
Hello! If I have any questions, where's the best place to reach you?
@K.D.valvi_8 күн бұрын
Sir i have bought second hand hsp 94111 car without ev so please suggest me best motor esc and servo
@Cbsetopper20248 күн бұрын
Rakish please please please reply . Can I use 2000 CST . I am left with no other options . Please reply rakish
@Cbsetopper20248 күн бұрын
I don't have an international card so I can't buy and import but I have one more option of 15000 cst . I will need to invest 700 rupees more . So I am thinking of 2000 CST
@Cbsetopper20249 күн бұрын
Bro please help me 😭🙏 . I want to buy silicon oil from robomart but i have to purchase in usd . How do you purchase in usd please reply??
@Cbsetopper202410 күн бұрын
Bro how did you got that silicon oil in 850 i am getting it for 16$ + i need to pay jn dollars so extra charges. Please tell me how did you order in 850
@Tetroner11 күн бұрын
Hey i recently watched one of your APM 2.8 setup video and i am going to create on myself. I wanted to know just like pixhawk does APM support flight automation? where we configure the path /checkpoints in mission planner software
@raghavgoel258011 күн бұрын
will it work on a speedybee?
@bigdeadlykicksandkickflips12 күн бұрын
im lost 3km you need more than that?
@PandaHiveGaming14 күн бұрын
dam using a lipo battery is one thing i haven't thought of also is that a 2s or 3s battery
@zardion420415 күн бұрын
I thought that all I had to do was connect it via a USB port and I could play any car game on my PC XD
@globalmovieman16 күн бұрын
where can i buy the esc in india
@spacemoses016 күн бұрын
Great timing! I just got back to setting up my pixhawk and lost all of my old work. Your video with the newer firmware and mission planner version saved me a lot of troubleshooting time with my power module. Thanks for keeping this old tech's resource material up to date!
@RakishRc16 күн бұрын
@@spacemoses0 glad to know this was helpful...I was sceptical whether to post this series or not...but since I had purchased this setup a year ago and had it pending I decided to complete the project and upload. My aim is to experiment with autonomous flying using the telemetry module.
@gilbertopelaez162416 күн бұрын
Question: is the metal upgrade a good thing to get for the hyper go h14bm?
@jehovanysmilian34317 күн бұрын
The go pro 8 can enable preview to my iPhone not sure how far it will work before freezing tho . Prolly a couple meters
@nino7118 күн бұрын
what if the RC brakes? Is it replaceable?
@driftzy9597Күн бұрын
You can buy upgradable parts
@gilbertopelaez162419 күн бұрын
can you make one like that on the front side please and thank you for the video it helps me a lot!
@RakishRc19 күн бұрын
@@gilbertopelaez1624 okay will post a video soon... although it's similar to the rera assembly.
@gilbertopelaez162417 күн бұрын
@@RakishRc thank you!!! I’ll be waiting ❤️❤️❤️
@StudyConcentrate-y1z19 күн бұрын
Bro what do you do for living ??
@Radhikasinghrajput70720 күн бұрын
Give your number please
@hardin130621 күн бұрын
From where have you learnt about all this about apm 2.8 and using all the peripherals.
@luisaugustohernandezrodrig467922 күн бұрын
Hi, i do the mod battery with my flysky but indont know how i connect the battery to the module.. donyou have any graph or video tutorial?
@j1ivibo23 күн бұрын
I can't tell you how grateful i am for this post. I still use my gopro hero 5 and decided to grab a karma grip off ebay. It wasn't updated and wouldn't work with my gopro at all. I couldn't figure out how to do it until this video. I went down the rabbit hole and found this video at 2am. Did it first thing when I woke up and now everything works! Again, very grateful and much thanks!
@RakishRc23 күн бұрын
@@j1ivibo Glad to know this video was so helpful! You're welcome 🤗
@gilbertopelaez162424 күн бұрын
Can you please do it for the front area full video like this one ? Thanks
@ooIISturmIIoo25 күн бұрын
un grand MERCI depuis la France pour l'aide afin d'installer le Usbasp avec Zadig!!!
@StudyConcentrate-y1z25 күн бұрын
Why did not you change the front and back spring to hard one . I changed mine spring was always compressed so i changed from black to silver one . Why didn't you??
@Rocky009-24 күн бұрын
What will happen if we change ?
@StudyConcentrate-y1z23 күн бұрын
@@Rocky009- the silver ones are more hard and stiff which means it will absorb more shock . It will increase the life of the rc car
@Rocky009-23 күн бұрын
@@StudyConcentrate-y1z and stability on road ?
@StudyConcentrate-y1z23 күн бұрын
@@Rocky009- mind was five times more stable after changing the springs because it absorbs more shocks
@Rocky009-23 күн бұрын
@@StudyConcentrate-y1z any sort of break or damage happen till yet bro ? I'm wondering to know everything cuz i have ordered this truggy and it reach to me by tomorrow
@aranavjoshi917428 күн бұрын
how do i solve "is this a linux board"
@RakishRc28 күн бұрын
Are you using latest mission planner software? Try to use an old version of mission planner and select download firmware option when updating firmware...you'll need to download the firmware file manually from arducopter website and then flash the file.
@StudyConcentrate-y1z29 күн бұрын
Bro where did you get that 7000 cst oil? . Please tell me 🙏
@RakishRc27 күн бұрын
@@StudyConcentrate-y1z I ordered it from rc mart
@StudyConcentrate-y1z27 күн бұрын
@@RakishRc please tell me the price in rupees
@RakishRc27 күн бұрын
@@StudyConcentrate-y1z around Rs.850 www.rcmart.com/team-associated-ft-silicone-diff-fluid-7000cst-for-gear-diffs-5454-00034390?search=7000cst
@StudyConcentrate-y1z12 күн бұрын
Bro i don't have budget please help me . Bro can I can I use silicon gresse or white lithium gresse . Please reply?? @@RakishRc
@StudyConcentrate-y1z12 күн бұрын
@@RakishRcbro 850 including delivery and GST ?? Please reply
@StudyConcentrate-y1z29 күн бұрын
Did you break it ??? Please Reply??
@RakishRc25 күн бұрын
No not at all 😎
@StudyConcentrate-y1z25 күн бұрын
@@RakishRc do you take it off road in bumby areas. Please reply
@StudyConcentrate-y1z29 күн бұрын
Bto please post hyper go 14210 videos. We loveit . And please do some upgrades . I will share with all my friends
@sadhiq186729 күн бұрын
This pickup good yes or no can you please reply to me
@LovesGames113Ай бұрын
Cool
@praddy1353Ай бұрын
Need battery and waterproof case where i can get it ??
@mmrx428Ай бұрын
Sir, the accelerometer calibration was giving an error for several days. Thank you very much.
@RakishRcАй бұрын
@@mmrx428 you're welcome
@CHRiSzFLАй бұрын
Hello dude, good info, was just looking for a program card for these but I guess bad luck. Do you have any experience with the Surpass Hobby ESCs by chance? Are they any good?
@RakishRcАй бұрын
I have one 60amp esc in my kyosho rc boat. It's actually good and it has option for programming with the program card.
@ovenxxxxАй бұрын
what about power output. 45Amp vs 35 Amp? and what about 10BL30 because i cant find LC35a in my country
@RakishRcАй бұрын
45amp stock esc is more powerful but the 35amp hobbywing esc is more balanced. Search for hobbywing 30am esc it's the same
@ovenxxxxАй бұрын
@@RakishRc thanks
@cinerigsindiaАй бұрын
Superb video.. all your videos are very nice and to the point … keep up the good work
@RakishRcАй бұрын
Thank you!
@GATTERAMOАй бұрын
I am looking for OpenTX 2.X firmware for Turnigy 9X but today it is no longer available for download due to companion certificate issues. How to get it ?
@RakishRcАй бұрын
drive.google.com/drive/folders/1nSvxngnG0C63F4jmztDvxGwcRvlw6pg4 Download from here
@GATTERAMO27 күн бұрын
@@RakishRc Thank you, thank you .... very kind
@RakishRc27 күн бұрын
@@GATTERAMO more than welcome!
@GATTERAMO27 күн бұрын
@@RakishRc Thanks again. One question, the language in the firmware is English ? And which version of Companion should I use 2.1.9 ?
@RakishRc26 күн бұрын
@@GATTERAMO yes it's in english. Use 2.1.9 because that's the last firmware and companion for it which is supported.
@GATTERAMOАй бұрын
I am looking OpenTX 2.X firmware for Turnigy 9X but today it is no longer available for download due to companion certificate issues. How to get it ?
@kanartechАй бұрын
It works in mine, but do not use rc battery with a higher C rating, you can only use a mobile phone battery
@feverexplosion1968Ай бұрын
hi, is a 3s battery fine on the 16bl30 form this model?
@RakishRcАй бұрын
Yes 3s is supported on that esc.
@SateeshKushwaha-lc8izАй бұрын
Please help me
@SylvanDiasАй бұрын
What happen😊
@SateeshKushwaha-lc8izАй бұрын
@@SylvanDias firmware not upload
@SylvanDiasАй бұрын
@@SateeshKushwaha-lc8iz we r also trying
@SylvanDiasАй бұрын
@@SateeshKushwaha-lc8iz me and my frd I'll tell u then
@SateeshKushwaha-lc8izАй бұрын
@@SylvanDias your contact number
@SateeshKushwaha-lc8izАй бұрын
Firmware not upload
@SateeshKushwaha-lc8izАй бұрын
Can you please help me
@rennestrubberg9737Ай бұрын
Hello do you know if there is any difference at all between the HW 16bl30 and the lc racing 35 amp? Thanks
@t3flozАй бұрын
Great video man. What’s your experience on the durability on the diffs with these cars? I might get one but I really don’t like changing diffs often. I would drive on 3s
@RakishRcАй бұрын
It's definitely durable and handles a lot of abuse. Just that it's a bit tedious to work on because of the screw positions and small size to work with overall. Diff you can use 10k or 20k oil if you're planning to run on 3s. But overall I really like the robustness of this model. Check my running videos of this car
@t3flozАй бұрын
@@RakishRc oh thanks. Ye think I’ve seen every video man :)
@nishantpawar3984Ай бұрын
Thanks a very informative video
@AyushRaj-ck4xcАй бұрын
Price
@RakishRcАй бұрын
@@AyushRaj-ck4xc Rs.14,000 available on Flyrobo and robu website.
@niharranjanmahali8549Ай бұрын
These flight controllers are dying now a time, but i love those❤…….having so many wonderful memories while using these in past.
@RakishRcАй бұрын
True...apm boards are outdated and the pixhawk series are still receiving updates but not sure for how long. Although working with these boards is a lot of fun. Pixhawk 2.4.8 is still very reliable and used a lot due to mission planner's host of options for waypoints and gps flight modes 👍
@niharranjanmahali8549Ай бұрын
@@RakishRc correct! Latest pixhawk flight controllers are very expensive but this is the only one having all the necessary inbuilt sensors and bunch of ports to connect bunch of modules you like, also at a affordable price.