The device is interesting. I like the overall design and engineering. However, being of Chinese manufacture it is not something that I would purchase. Instead, I can make this in my shop with scrap pieces of metal in less than a day. I do have to agree with some of the other commenters that you did stretch this out a bit longer than necessary. We all go the idea of what you were doing so shorter sequences would have worked better. Another thing that you may wish to consider is either adding a vocal track or some music. The constant hissing was really quite annoying. Even if you had just had a radio playing in the background it would have been better. Just some ideas for you to consider. Thank you for showing us this tool and how it works.

Hi can you tell me where to buy this? 😁

What knife is that?

But these are not the original Diamondstones from the manufacturer right ?

Maybe interested in Indonesian natural Whetstone?

I think you mesured the angle wrong, or almost. Why don't you put on the knife, why only on the base?

Забыл показать модернизацию планки под угломер, штанги для держателя образива, и еще массу вещей которые далеко не от руиксин про 9 из коробки, делать так делать видео от и до а не 2 добавки и идеал у вас в кармане!....

Would you attempt a katana on that?

What are you using for lubrication on the stones?

i am about to get mine soon

use the knife as referance not the stand, the edge of the knif isnt the same angle as the stand

impressive

Заусенец вытянул на рк, один раз хлеб отрежет и все, больше резать не будет. На зерно надо камнем с каждой стороны!

I am going to get one of these sharpening systems. Which stones are you using (they look like diamond stones)

so, you added $80 worth of parts, and $200 worth of time to a $40 sharpener to NOT purchase an actual high quality sharpener? How about the stones? are they up to the task?

Ну такой вууумный, аж офуеть. Другие не догадались.

hi i tried the bearings they worked ok but one collapsed after a couple of rotations china bearings poor quality

wow beautiful... Where can i buy this knife sharpening system and how much does it cost?

Fake damascus😂😂

Здравствуйте один вопрос угол заточки как выставляли угломером или на глаз. Прикупил точилка смотрю ваши уроки провожу модернизацию изучаю все нюансы. Успехов и добра.

How low can this go? 10 degrees per side? And how high can this go? 30 degrees per side?

Excellent.

Приветствую! С этим станком можно и на коммерцию точить,а почему нет? Я сам видел в городе заточку коммерчискую на Руиксине 008 пару лет назад, а эта привосходит 008-й многократно. Со слов работника он точил 10 ножиков в день плюс минус.

Я соглашусь с предидущим оратором что этот костыль облегчит обучение заточки на руках. К тому же можно потренироваться работать на суспензии!!! 👍

For anyone struggling with freehand I'd say this is the perfect stepping stone to learning.

❤❤❤❤

Best knife sharpening tool :)

How many mm of blade can it hold

Good job sir Pakistan me price kiya hy iska

I saw that sometimes you passed the knife in something that looked like leather, its leather? For what does it work?

To be honest, ZDP-189 powder steel, except for the soft layer pattern steel forged by Japanese knife-makers, I haven't seen the original ZDP-189 with composite steel layer in the market for the time being.

이것 구입하려면 얼마인가요? 구입하려면 얼마나 걸리나요?

I actually have looked the back of the blade with a microscope and I was actually able to count the layers.... I'm serious... And can confirm it's a 67 layer Damascus 😅

Olá. Tudo bem? Ótimo vídeo! Sou katana Kaji. No Brasil. Saberia me informar se estas dimensões deste equipamento comportam uma katana? Teria como eu estar afiando uma espada de 1.2kg e lâmina de 70cm nisto? Obrigado.

Will this large bar with clamps fit the ruixin 009 too?

this is my sharpening station kzfaq.info/get/bejne/h55xepZyxsjSZo0.html

Hello here, i'm looking for a sharpener for kitchen, hesitate between the K09 and the Beast in is simple version. Does Beast justify the price difference ? is it more stable ? more precise ? more confortable ? stronger ?

Great job, whats the angle you set ?

What is the lowest angle you can get with the rx008 ?

Hi, great videos over all :-) Does itz make any difference other then flipping more comfortable? Thx

Good alternative? this looks better in every way!

Gostaria de comprar como faço para adquirir uma maquina dessa

how sharp do you want your knife? lightsaber.

like the jaw mechanism smooth flip over don't like the ball bearing swivel and it needs some safety stops on the rod, and an handle that takes your fingers above the blade

I have the same system which I found on Amazon for $157.00. You do not demonstrate in your video hiw the slider point and elevation assembly can be slidl Left or Right roughly 6 inches. . this comes in very handy for large knives. Mine also included stoppers and springs to limit the stones travel each way. It is built like a tank and best value I could find by far at well under $200.00.

🟦…IMAO You've been way more aggressive with that blade than need be,..you've Way overworked it!... You keep creating a burr and then orienting that burr & then creating another Burr!.. Your strokes should always sweep AWAY from the Spine at some angle, Not TOWARD it!

ЖАЛЬ ЧТО ТАКОЙ КОРОТКИЙ РОЛИК ЗАПИСАЛ. Я НЕ УСПЕЛ ПОНЯТЬ ПРИНЦИП ДЕЙСТВИЙ 😄😉

Nothing about this looks amateur. I'm gonna stick to something a little less complicated. I just want my tomatoes cut smoothly, not trying to go back in time

Nice but after 60 years of hand honing all sorts of tools using only stones of different types, I can get a good steel just as sharp.

In the link you gave, the price of the "bar with clamps for sharpening knives" cost more than the whole KO9 system with 4 stones... adding to this the Rack lift, ball bearings and your time, made It too expensive and not profitable for amateurs, better for you to invest in system that works right out of the box.