All Things Clean!!

Пікірлер

@thegovna4u 13 күн бұрын

Can you do a video cleaning upholstery with this machine?

@Metalhead0426 13 күн бұрын

I actually have one.. kzfaq.info/get/bejne/f9x_ft102tCtY3k.html

@JuanPerez-vv5lk 13 күн бұрын

I'm trying to buy the spartan products but I can't find them. Where to buy them?

@Metalhead0426 13 күн бұрын

I buy the wax and stripper locally at Brady IFS. But I also see where you can buy it on Amazon if you cant find another distributer.

@antoniovasquez1089 15 күн бұрын

Where did you buy this machine, and the attachments did you buy separate.

@Metalhead0426 15 күн бұрын

I got pretty much every thing from JonDon.

@123MATEMATICAS123 21 күн бұрын

how much make a estimate for school similar to video, thanks only aprox you make this 2 days with 4 people, 20 hours in total, ahhh 80h x $20 = 1600 dollars for the job , what is you opinion thanks

@Metalhead0426 21 күн бұрын

@@123MATEMATICAS123 I think $1600 would be too low. You need to make that at least in one day with you buying the materials and paying employees

@123MATEMATICAS123 21 күн бұрын

in computation the honda what is the best and how much is the cost the you motor thanks

@Metalhead0426 21 күн бұрын

@123MATEMATICAS123 I've only owned the Kohler so not sure what is the best. This motor is probably around 3k new

@Bayenseltd 24 күн бұрын

I was stripping one room for 3days... Layers upon layers wax and never end

@robertgibson8979 25 күн бұрын

How did you know it was thee breaker

@Metalhead0426 25 күн бұрын

The breaker should have been able to carry the load I put on it

@runzization 27 күн бұрын

Good to hear you've got it in time for warranty. Have you thought about taking those LX or ZX motors and retrofit into something like All American Mack? for a reliable legit backup, you've already got your fuel fire heat

@Metalhead0426 27 күн бұрын

No I haven't. I wanted to get away from ETMs all together. This machine has proven itself to be way more reliable even with this breakdown.

@DP-jb4yo 29 күн бұрын

I wanna get the prospector but I run a mobile detailing business and it doesn’t look very portable

@Metalhead0426 29 күн бұрын

This machine weighs about 150 pounds but they do make machines half this size. It may not be prospector brand. I seen them at TCS in Georgia

@DP-jb4yo 28 күн бұрын

@@Metalhead0426got ya I have the hp60 just arrived yesterday what you you use these machines for mostly? Are you strictly carpet cleaning?

@JacksonHomestead Ай бұрын

Was this just cleaning the floor or also removing a layer of epoxy? Our epoxy is flaking and I wanna strip it to the bare floor.

@Metalhead0426 Ай бұрын

Just cleaning. If I remember correctly it did remove some of the old sealer but it will not completely strip the floor

@JacksonHomestead Ай бұрын

Thank you

@Sliezo Ай бұрын

Have you done any work with burnishing? If so I'd like to see your process if possible.

@Metalhead0426 Ай бұрын

No I'm sorry I haven't

@Sliezo Ай бұрын

those waves arent going to cause that much stripper to be left behind i use the same machine and I work on a building where they laid the tile over a dirty floor which left massive waves.. my fix was to replace the builds frequently maybe once every couple of weeks cause the blades will ware out decently fast cause of the stripper all its good to wipe the blades to get out any gunk you are dragging to keep maximum contact with the floor hope this helps

@Metalhead0426 Ай бұрын

Thanks. We were new to using the machine. We realized that we didnt have the blades all the way down

@AldrichCarrasco Ай бұрын

how long do you have to wait between each coat?

@Metalhead0426 Ай бұрын

I normally have to wait 25 to 30 mins then about an hour after the last coat before I walk on it.

@cherylanderson1308 Ай бұрын

Love this Job

@Cynthia-qo9wu Ай бұрын

Lighten it up I see the difference immediately that carpet was dirty love seeing that soil thru that tiny window 😍😍😍😍😍😍😍

@tonicroteau5700 Ай бұрын

Should clear the entire floor.

@jasonsmith2953 Ай бұрын

Are you having any problems with your prospect 500. Any issues yet

@Metalhead0426 Ай бұрын

Zero issues

@jasonsmith2953 Ай бұрын

Not sure I think the Prospect500 is a good

@damonmd3 Ай бұрын

Great video Thanks

@olemendoza Ай бұрын

Look better with the pad one, not mop

@22huracanes Ай бұрын

Wondering how much did you charge for this job , thank you , new follower here!

@Metalhead0426 Ай бұрын

.60 per square feet is what I charge so this job was around $2700. 3 of us stripped it because I was busy at the time and needed to knock it out fast. 2 of us waxed it the next day. This job could have easily been done in one day.

@equalizer2233 2 ай бұрын

Well u showed the process of stripping and waxing the large open area, but what about the small rooms, restroom, etc with obstacles to work around. Thats where is gets interesting and noone seems to show those areas on video.

@Metalhead0426 2 ай бұрын

Same process but a little slower and do smaller sections. I will try to include some smaller areas in my next video

@codydavis3698 2 ай бұрын

How do you price a job like this?

@Metalhead0426 2 ай бұрын

I charge by the square footage. Price per square foot will depend on your area. It ranges from .60 to 2 dollars a sf. It comes down to how much people are willing to pay and how much profit you need to make.

@patrickclark4583 2 ай бұрын

Have this machine but the spray is not coming from the wand ,

@Metalhead0426 2 ай бұрын

Check the quick connects to make sure they are connected. Sometimes when new they can be a little harder to connect. Be sure to connect the solution line before you turn on the water pump.

@patrickclark4583 2 ай бұрын

The liquid is not coming from the wand

@cashew1392 2 ай бұрын

Gf owns a massage studio. Cannot find help. What would be a good pre spray to get out of smashed down, slick, glue down commercial carpets squares? Slick because of feet body oils, massage lotion and massage oils. Iwill be using a new Oreck 12’ floor scrubber to bring the pile up but need to know what spray to use. ……. Brushed it by hand and Dawn Powrwash little bottle, then Big Green machine. Took 4 hours ONE room!!! (Why I bought an Oreck now) I have 24 rooms left to go. Please provide an answer, and thank you !!! I want to: pump bottle spray pre cleaner, Oreck floor scrub it, Big green carpet cleaner - clean it, Big Green rinse pass. Is this efficient?

@mrtonygeetur 2 ай бұрын

Have you ever rented a generator from Home Depot for a job like this?

@Metalhead0426 2 ай бұрын

I havent. On this job it wouldn't be worth the trouble as you would have to run 2-150ft extension cords from the generator outside to the machine. Its whole lot easier to just use their power.

@niklaslandahl7753 3 ай бұрын

Does the machine warn you if both outlets are on the same circuit?

@Metalhead0426 2 ай бұрын

Yes it has a built in circuit locator. I didnt know this when I made the video

@jasonsmith2953 3 ай бұрын

What do you think about the prospect 500 so far?

@Metalhead0426 3 ай бұрын

I like this newer model way better than the last. Bigger tank, built in circuit locator, different pump, and its more quiet

@pedroandrade2103 Ай бұрын

Is Prospector brand better than the Sandia Sniper 500?

@Metalhead0426 Ай бұрын

@@pedroandrade2103 I think they are the same machine with different branding

@mrtonygeetur 3 ай бұрын

Nice video, thanks. Hope this helps, look at the plug one is bronze colored the silver colored, they should always match up that way.

@christopher3073 3 ай бұрын

I love big wide open floors like this! Well done guys! Looks nice.

@Metalhead0426 3 ай бұрын

Thank you!

@kyler7305 3 ай бұрын

Are these pre sprays safe for pets?

@Metalhead0426 3 ай бұрын

All I know is that they are safe for pets after the cleaning is done. Any pet should not be walking around on the carpet while you are cleaning.

@WatchmeNaNaaa 3 ай бұрын

awesome!🤩

@84blingbling 3 ай бұрын

Price per sq ft ?

@Metalhead0426 3 ай бұрын

The price per square footage depends on your area. For instance, in the south where I am located prices are around .75 per sf but in California it could be as high as $2 per sf.

@chingosote 2 ай бұрын

What do you think good price to charge a Costco in Michigan?

@LoudStereoTINYDICK 2 ай бұрын

$3 per square foot @@chingosote

@ShmooyShmoo 3 ай бұрын

What was the name of that vacuum machine??

@Metalhead0426 3 ай бұрын

This one is Viper brand but same as this one. Wet Dry Vac with Front mount squeegee www.amazon.com/USA-Clean-X18WD-Vacuum-Floor-Cleaner/dp/B0B1PDVY3T/ref=sr_1_3?crid=8MWN8XI85VN5&dib=eyJ2IjoiMSJ9.bigA2Ec2pTTG2A2ZrIQXxPpyuMuILlse791SxsSYvKWGIhmkgbXNhoOwot8kiO3Qlcklnz2So_1dK3UBM0PzIYMNV5m6c_ndANcuyDu11B0lUi0XRdQ4oB5Ji78_eKaSzpi7cRN8_YYxVzeeCizEbABExXuELl8uc7WJZJJS_f3lLJEUVl_C3QA_uOk_sKNkH5GyUTNONVj7hVqRzeUsqiiImKC88z6cF3Qo84XoUEtYz9AFxIrHKFb3rAeozQzaQyi3ODFjHuY3bOfXotLI78RTwZq2GPnIahMPMRHdoIE.S0_FchDe04IiMGohvtzs9ZP5o911PxP0lLxVXkhAutc&dib_tag=se&keywords=front+mount+squeegee+wet+dry+vacuum&qid=1713215531&sprefix=vacuum+with+front+squ%2Caps%2C93&sr=8-3

@ShmooyShmoo 3 ай бұрын

@@Metalhead0426 thank you. I hope my company will pay for it. Bc we’re doing it all with mops and scrubbing

@sandovalsuarezmh6939 3 ай бұрын

We tried on the SANDIA equipment (300) but didn't work .... Pressure seems to be there however the still dropping 100 psi every trigger squeeze ... Thanks for the video though

@Metalhead0426 3 ай бұрын

It's normal for it drop on the pressure gauge while using it. Just so the flow is consistent, you are ok

@richvasquez2034 3 ай бұрын

2:50

@richvasquez2034 3 ай бұрын

How long are them electrical cords? Can you use longer ones? Separate grounds are necessary correct? 2:50

@Metalhead0426 3 ай бұрын

They are 50ft 12 gauge. You can use longer cords but over 50ft you need a heavier duty cord to carry the amperage. Yes you need 2 separate grounds and circuits. One plug on the machine pulls around 15 amps and the other around 19.5 amps. Usually commercial building like these are set up with 20 amp circuits.

@shawnsturgeon1014 4 ай бұрын

Is 9000w or more really need to run these machines? The reason I’m asking is I have the predator 4375.

@Metalhead0426 4 ай бұрын

Yes. Just the machine pulls near 40 amps. Then add in the turbo heater. You can suck up some watts pretty quickly

@shawnsturgeon1014 4 ай бұрын

@@Metalhead0426 without the heater, just the water hog and air hog, you’re saying 40 amps?

@Metalhead0426 4 ай бұрын

@shawnsturgeon1014 yes pretty close

@alihapali 4 ай бұрын

Is the air air hog pump out OK I want to buy it for carpet cleaning only

@Metalhead0426 4 ай бұрын

I had some issues with mine. Sometimes the pump out wouldn't kick on. Also had trouble with the filter getting clogged too easy. You can use a sock filter but it only holds so much.

@shawnsturgeon1014 4 ай бұрын

How do we know you’re not a salesman for prospector? This is the only negative video for Mytee.

@Metalhead0426 4 ай бұрын

Well I guess you would have to trust me 😂

@Metalhead0426 4 ай бұрын

If you want to see more negative videos on mytee, join the Facebook group "All Things Mytee"

@Shwayz 4 ай бұрын

Great simple video. I’ll be stripping and waxing a floor tomorrow for my job for the first time and I can always appreciate a job well done both with the floor and instructions in video. Thank you for the help!

@Dreaming87_ 4 ай бұрын

How do you quote these cleans if you don’t mind me asking? I have an office I am going to do this with but it’s my first time and I’m clueless on pricing 😭

@Metalhead0426 4 ай бұрын

I charge by the square footage. The price per square footage depends on your area. For instance, in the south where I am located prices are around .75 per sf but in California it could be as high as $2 per sf.

@Pullover420 5 ай бұрын

My old boss said that magnets are a dumb idea. I knew he was wrong.

@2eagle86 5 ай бұрын

How about corners? Do you use water and mop to pick up stripper?

@Metalhead0426 5 ай бұрын

Yes anything else that is left can be mopped up. Just keep an eye on the water to make sure it does get too contaminated with stripper.

@robertstinson1349 5 ай бұрын

Forgive me for not thinking of that BUT the pipe over the faucet was worth video!..I had been filling up the mop bucket with a pitcher..simply great ideas. Thanks

@gorrilaz27 2 ай бұрын

I so love that

@Bayenseltd 24 күн бұрын

Let me tell you how I handle it when I need water so fast 😂 I tape a trash bag on the tap and turn on the water ...

@jhop5632 5 ай бұрын

I thought you were supposed to cover the wall borders to avoid getting any floor stripper on them. Also u would love to know if tou let the floor dry on it's own between each coat or if you had a fan going..

@Metalhead0426 5 ай бұрын

You can cover the base boards if you feel it is necessary. We never do. On the wax drying, I prefer for it dry on it's on so not to stir up any dust. Always have some fans just in case.

@jhop5632 5 ай бұрын

@@Metalhead0426 ok cool! Thank you!

@youngnreckles47 5 ай бұрын

What if not producing any electricity I connect equipment and the generator completely shuts off

@pipjr8685 5 ай бұрын

Do I have to replace the pump if the heater isnt working on the prospector 500?

@Metalhead0426 5 ай бұрын

You should be able to replace just the heater

@LimitedWarranty 5 ай бұрын

Came out very nice 😊

Ең жақсы KZfaq

Пікірлер