Thanks so much for the tip. I was also wondering about using the baking soda, because I noticed in the video, after you pulsed the pesto, it was bubbling. So, I was wondering about the taste of the baking soda. But, I will take your word for it. I guess you can do the same by making arugula and cilantro pesto, etc? Can't wait to make it. 🤩 Now, to start growing my own basil. Absolutely LOVE pesto 🥰

You can never have enough clamps!

I had a similar project restoring my metal wheel barrow except the outside of it was fine. It was just the inside that had rust because I left dirt in it too long. I first sealed up the leaks around the bolt head and then poured several containers of Evapo Rust into the wheel barrow. Within 24 hrs it dissolved all the heavy caked on rust at the bottom. It left pock marks where the rust used to be which meant the rust had penetrated too deep for a grinder and the Evapo Rust solvent was indeed the best way. After I cleaned out the residue of the Evapo Rust solvent I pretty much went through the same process seen here. Btw, to transfer the Evapo Rust out of the wheel barrow and back into its containers I used a Drummond 750 GPH drill pump from Harbor Freight. I think it’s better than the one Home Depot and Ace sells.

Wtf is a half a cube of butter??? I got cups, sticks, even nobs, but never have I heard of a half a cube of butter! Please explain.

Never heard of "Oysterizer"! 😂😂😂😂

What psi did you use?

Thank you so much

U should sell them

Очень круто! Но почему такое плохое качество-360p?

You are soo friendly :) Thank you for this Video and Work ❤ grettings from Germany ^^

Help please?! OH MY GOSH! One hour ago i saw the video you did while getting car inspection so i came home and TRIED DOING THIS IN MY CONDO! FAILED. Thank YOU SO VERY MUCH SHOWING HOW TO RIG IT!! Im going to hang it from air vent above my head on the ceiling. Ill run some cord through it and knot it Then hook it to paint can handle as you did Do you think it will swing correct hanging from the vent ? Im in an art show in a gallery soon and I dont have a garage to do as you did

...very well done DIY video Muz.....I have the same wheelbarrow.....this inspires me to do the same with mine..... 🙂

fantastic video

It’s the butter part I can’t stomach

nice !!!

Nice job

Got any more recipes?

Great funny editing!!!!

I like the way it turned out.specially the wooden handles.

Do you get paid by how much you blue the work?

Why the baking soda? I blanch only with water

Looks good!

“no metal brackets needed” *creates his own god damn wood brackets

I thought I knew all. Awesome!

Your recipe is the best. I made it today and it was so nice and beautiful ❤️❤️❤️❤️. Thank you. Btw basil from my garden.

This really helpful thank you sir

Thank you for the video I made something very similar with one exception I made the stand wider at the bottom meaning extending in back of the tablet and I cut pieces 3/4x 3/4 rounded to form a little well in back of the tablets to keep extra pens, pencils and stylist . Being larger also acts like a Outrigger more or less so in case your tablet is larger or heavier or you put too much pressure on it the tablet will not fall backwards. I hope I'm explaining myself. Take care

What blender are you using? 2 blenders died after doing this 😢

what ah da showoff no safety epa regulathions

Thank you❤

Real Italian pesto is made of only 5 ingredients and certainly not baking soda and other rubbish … This here is a typical American whatsoever mixture …. 🙈😖

If running the two straightedges along each pair of nails strikes a circular arc, then using only 3 nails--the end points of the baseline and the top of the center high point--to construct the straightedges will also strike a circular arc. Once the straightedges are built, remove the nail on the center high point and simply run the straightedges along the end points to strike the arc.

Whoaaa that wood lathe trick for the circle is incredible!! I need one after seeing this. Great form and tricks. Thanks for sharing.

My dad had hìs own shop, and was always making things. Sure miss him.

Leave it to dad, he can build anything a d everything. I miss my dad, handy all around.

In case you're wondering, drilling the holes for airflow was a great idea. I tried making a mug in a similar way, but skipped the air holes. The inside of my mug is now square lol. At least it all caved in evenly.

It's tough to think this project is for a beginner woodworker when you used a planer, drill press, router table, table saw, and that level 99 black magic staining technique (LOL). I'm a beginner and I don't have any of that stuff. The project itself might be easy, but those tools are well outside my "beginner" hobby budget. Thanks for the video, though, it was encouraging for me.

Nothing I can say..... 👍👍👍👍👍👍👍👍👍👍👍👍💯👌👌👌👌👌👌👌👌👌💯🇵🇭

I am going to buy a new steel wheelbarrow soon and seeing you make the handles out of wood like that inspired me to do the same! I am going to take some nice hickory from an old tool handle and make two new handles that fit my hand nicely and install them into the tubes that make up the frame. Thanks for the inspiration!

Now that's cleaver

But why doe it keep it green? is the browning some sort of acidic reaction that the alkaline baking soda neutralizes?

I love the spout!

I’d definitely buy one right now 😂

I turned my 14 inch Lincoln bandsaw from1979 into a 26 inch throat, 17 inch high capacity saw & it worked terrific. I just installed the Carter blade guides & cut some 1/2 inch cold rolled plate. HOLY COW! Never thought that guides were that important if your saw was set up correctly, but the Carters took it to a new level. Cut was almost like it was machined on the mill.

What are the measurements of each wall?

I really love this.Thank you

Beautiful work bravo

Magician. Thank you. I'm a complete novice, subbed

i use the "leave an eighth" method, works everytime! now, here's a challenge, try a 6 loop knot, hint start with a hexagonal blank! i've done dozens of 6 loop, mostly for pens

I thought magicians didn’t reveal their secrets? lol. Seriously, thank you for making this vid. I have tow arched windows I need to make a filler for and this is just what I needed. Ty