Hey, all us old farts ,give up looking, just go buy another. You can find it later.

Great video! Thank you!

You have email and maxes email I have gift.For yall

Got my Hustler SD out of the shop today. Over $700 in parts and labor.

Thanks good add on

Hustler's design and quality control seem to decline with every passing year. We have had 3 Hustler zero turn mowers over the years and each has been worse than the one before. Hustler ignores any problem that they can't fix and the selling dealer is just as unknowing.

This is a common problem and warranty should take care of your dealer is misinformed.

Resembles my fender creation. I made mine just the width of the tread which I like a bit better. But then, you have your own taste and those look very nice and you can sell them. Mine went through the flex forks over the top of the tire so when I was backing up it didn't throw trash onto the front of the deck. You can add an extension to yours in the event you find backing up still deposits debris. Great job Sir!

I’m not pay to say this , I use Super Clean to clean the grass stains off of the deck.

Looks a lot better I like them better good job

Sorry for the back ground noise my neighbor doing ground work to set is tobacco crop out.

Great Idea With The Hook, Seen Your Video And Had To Buy The Drain House! I Made A Great Contraption That Works Much Like The One You Made But The House Looks Like Something Should Have Been Installed In The First Place! I Have a Yellow Drain Plug That Locks In And Pulls Out To Open The Valve So It Will Just Spin Right Out Without Doing Anything! It's A Kawasaki Engine So It Should Have The Right Threads? I Hope. Anyway The Hook Idea Is Something A Will Want To Get So The Hose Isn't Rattling Around Or Rubbing And Cutting Into The Hose. Thanks For The Video. The Guy I Bought The Tractor From Said That Changing The Oil Was A Disaster And Oil Spill Every time! My Contraption Worked Great and No Spill But More Work Connecting So This (No Nonsense Hose Deal) Looks To Be A Winner!

Can you tell me the thickness of the tubing

Nice, complimentary addition to the XDX Sir.

I call it pretty cool looking ride looking good Micheal thanks again for sharing

They are call Splash Guard or Mud Flaps ,but you can call what every you want too.

This is great! Thanks for sharing!

While I think the fenders are useless for those tires, I do like how they look. I think it would be time better spent if you put a deck-cleaning hose nozzle on the deck..

Just installed the oil hose I had to snap off the hose connection on the one I took off my engine bolts are screwed in from underneath it was easier just to snap off than to try to save it but hose is on and ready for the next oil change once again thank you for your time in showing us what we need to do to fix our machines up for easy access

My front fenders didn't hit anything, the neighbor just thought they looked terrible. Mine looked nice as they were yellow HDPE that were half inch off the tire and same radius. But then too, the deck skirts worked perfectly and I'm happy with those and looks great. The rear mud flaps I never bolted on. Been working on and off for years on making fenders with a flap built in front and rear formed around the tires. Just can't make myself like the looks I keep coming up with. Reminds me of the Swishers from a few years ago. lol Great video young man. You need to medicate that cat. Just way too rambunctious. hahaha.

Well good luck I hope the mud doesn’t go on your mower next keep a pressure washer on hand thank for your time on your videos you and mittens have a great day

The mud flaps protect the deck in reverse or turning when wheel spin backward throw mud on the deck.

I did paint the flex fork , covers , matte black the gloss just wasn’t working for me to shiny in the sun light.

I love the “upgrades” you made. What do you use the mirrors for?

Nice new sub. Will support

I dont see a 6000uls but i do see a acs6000us but it does not say it works with the xdx. I wonder if its the same one?

I didn’t like how the fenders look , I did some changing to the fender with the cutting disc, I will show them in the next video, I call them fender shields now. But it doesn’t keep the grass off the deck like it did before I cut it.

I did those front fenders in 2015 made of HDPE that covered just the tread area from the front to the rear about 3" from the ground. Worked great other than moving up and down over abrupt curbs so I removed them. Not to mention how hidious the neighbor said they looked. I didn't mind them too badly but his comment said time to take them off and build the deck skirts which works great and doesn't look bad. I think yours looks great. Good video Sir.

If it safe to do so can you ride the mower and let us see Hal it looks and turns if not it’s ok hope it works good for you they sure look good

Sorry about the microphone cutting off that times in the beginning of the video.

I know I said lock out transmission, what I should’ve said too but the Transmission in Bypass.

Good ol mittins got a black cat too his name is Tux but only indoors cat and the black looks better ant another good video thanks again for sharing have a nice day TCB

I hereby consider you the official Hustler Turf Mower Owners Problem Solving Engineer. You deserve a raise and that stinking BLACK Sheep 'Mitten's is going to have to have an intervention very soon or the family is going to emplode.

Good job Mr Micheal can’t wait for your next video and you can show us the black painted lights I think that would be better too thanks again have a good mowing day

I have painted the chrome lights to glossy black , it looks much better.

Michael, that is a fantastic video showing the sweepstakes winnings. You deserve it even more now than before you entered. Great video Sir.

Sorry my microphone not working the best at the begin of the video.

I really enjoy the mods you have done to this mower, I bought the same model about a year ago and noticed my right tire spins when backing up, even on level ground. I got better traction when I put the flex forks on but it still spins.Any suggestions? Could it be the tracking?

Remember that you'll always have plenty of assbytes that don't make videos and do anything to help others in any way on videos let alone in real life as they are nothing more than assbytes. Forget the jerk. Give me his name and I'll make sure I give him a shout out in one of my videos. You have a firm grasp upon French. Good job. lol Take the screw plugs off, drill a 1/4" pipe plug thread in the center of them. Screw in a 1/4" pipe plug with a 3/8" hose barb then replace them. Get a 3/8" pipe 'T' and a SD reserve tank. Make yourself a bracket to hold the reserve tank. Plug in the two wheel motor hoses to the 'T' and the 'T' to the reserve tank. Fill the reserve to the very bottom of the tank when it is as cool as it can be. When the wheel motors are hot it will push oil up into the reserve tank to probably half full. As the wheel motors cool, the cooler oil will recede back from the catch can/reserve tank into the wheel motors. Just for giggles on the seat spring frame. I would use some 1/4" fuel hose, slice it down the inside of the hose where it curves from the spool. Place it over the frame cut out edge to make sure the battery never makes contact with the frame in the event the hold down might loosen allowing the battery move backwards. Same thing for the seat frame cut out. I always use fuel hose to line the metal cut out for the fuel tank, battery opening and on mine the electrical fuse panel addition. Always great videos brother.

Did you say sd was your previous mower, is that now the xd, if so is there a difference in the deck performance with xdx, the xdx has same deck as the fasttrak, we're torn between the xd or xdx, deck performance is the deciding factor, thanks

Hi Micheal good dinky video I am waiting for the warmer weather to put my hose on and at the same time I am going to change the oil also going to raise my handles so got a few things to do and I’m changing my dinky French battery now it’s the same one that came with the mower this is I believe 5 years now but I don’t have all the fancy things that you have on it anyway have a good day keep on mowing

I believe if I was to ever buy another zero turn (I don’t own one at the moment), I would look very hard at the Gravely ZT HD 60 and the Hustler Fastrak 60.

Hey Michael! Have you had any problems with this mower and how many hours are on it? Would you buy another one? Thanks!

Promo>SM

Hey man where did u get that neon hustler garage sign?

You didn't show much on how you changed it out. Bad camera work, too much jumping around.

I love this!!! This is Brian J…we need to get together and build on this song.

Very good and like your thinking about putting a copper sleeve in the pipe so it doesn’t crush it and the caps are a good touch thank you Micheal I’m going to be busy as soon as the weather gets warmer TCB

Went on Amazon and ordered a hose for 14.84 can’t wait to try it on my mower thanks again Micheal and your brother st wanted to know how or what you used for the extensions on the hand rails did you make them or buy them and wow can’t believe the brackets broke on the battery hold down I will make sure that I’m careful removing the battery when I take it in the house for winter thanks again have a good day TCB

Where did you get the hose and what’s the part number?