Wasting time...a waste in drilling!If I programm like this ...the company next day sends me ...home sweet home. For tapping ..you must use forming tap tool...to avoid the chip...use straight tap tool..not helicoidal😅
@homach98654 күн бұрын
Hi! May I have the price of this model?
@flikflak244 күн бұрын
I was thinking about useing one of those 15kwatt induction heater coil forges instead. Or try and do my own version of the schunk tribos
@JestonBrummet6 күн бұрын
I just messed around with the xhc one last night for about 6 hours. It nose dived my Z-axis twice. Kept losing it's position and the spindle would turn on and off randomly.
@mscscambodia8 күн бұрын
68 Deg F or 20 Deg C with 30 to 50% humidity when doing inspection, all tools and parts should be in your lab for 8 to 24 hours depending on size of parts, ANSI B89.6.2. For calibration you need Grade 0 Gage blocks, again ANSI B89 standards for different measuring tools including your surface plate. Good video for the beginner, appreciate that.
@joshb49910 күн бұрын
Do you have the extended Z Height column?
@JumaGarkuoth11 күн бұрын
I think it's quicker access
@unholyorders8218 күн бұрын
I run mostly haas machines but recently runinng our Okuma space ceters and their badass machines. Fast, powerful and accurate .
@jim514819 күн бұрын
Good video, thanks! I don't know what RatRig could do differently, but those extrusions in that box could easily get damaged/bent in shipment from Europe to the US. Hopefully all yours are fine.
@MrTjmk22 күн бұрын
That had to be one of the most inefficient tool paths I've seen in a while. You're starting to remind me of me.
@NerdlyCNC22 күн бұрын
ha ha ha... it sure was
@willthompson907323 күн бұрын
They should make one of these that can atleast move like 30 degrees in both directions so you could have like a semi 5th axis it would take up some of your z travel because youd have to place it higher to get it to where it could negatively travel in i guess that would be b idk im more familiar with lathes
@andrewsember639328 күн бұрын
good job Boss
@jamilrahman5960Ай бұрын
please help me regarding this alarm. thanks (coordinate 2 the 1 nc program 1: O0031 file not found)
@jamilrahman5960Ай бұрын
please help me regarding this alarm. thanks (coordinate 2 the 1 nc program 1: O0031 file not found)
@ryanturner9958Ай бұрын
Yeah pay less skilled guys. That BS thought process is exactly why no one is becoming a Machinist anymore. Shops begging skilled guys to come work for them. what happens when this generation of Machinists are gone? You can just have the machine run itself. We will see how that goes.
@machienistАй бұрын
I've spent the last two weeks looking for that carbide extension. Could you please post a link to it? Or the manufacturer.
@NerdlyCNCАй бұрын
call "Live Tools" Australia....i believe is called Jin Lin
@machienist23 күн бұрын
@@NerdlyCNC Really appreciate the help. Shan Gin is the company and that brand doesn't show up anywhere on the livetools website. Though Stephen at livetools found it after a few emails and phone call www.shangintool.com/extension-adapter/HDC.html
@NerdlyCNC23 күн бұрын
@@machienist cool...hope this helped.
@stomp4423Ай бұрын
Thanks for keeping it real. I like the informal vids. Our Toolroom just purchased an Okuma Genos m560 mill and Genos 3000 lathe. Quite the step up from our usual Prototrack lathes and Accurite cnc Bridgeports! Lol. Love em. Gives us veterans and even our apprentices something to get excited about. 😂👍
@bltventureАй бұрын
Thanks for the vid, are you a Fusion guy or a Solidworks guy?
@SteelcraftedАй бұрын
Bro could you imagine accidentally opening the garage door with the Z axis all the way up? 😂 😬 Although it doesn't look like you have an automatic opener....
@NerdlyCNCАй бұрын
ha ha....no opener.....and its latched. but if it came up that would suck
@razvanileaАй бұрын
Thank you for your time and shared knowledge, great content and sound, appreciate the honesty, a lot to learn.
@j15246Ай бұрын
hello, keep it up dude
@AlBundy160Ай бұрын
I am running a pokeys57cnc and mach3 on windows10 with the A-axis slaved to the Y-axis with both Y and A having their own drivers, motors, and limit switches to enable auto-squaring. Everything worked as it should when I used the keyboard to control it, but when I used a pendant in continuous jog mode, the Y-axis moves in both directions as it should, but the A-axis only moved in one direction racking the gantry. When mach3 is in step mode, everything moves in the right directions using the pendant. I first was trying to use an x-box controller, and it had this problem. I thought it had something to do with the x-box plugin, so I bought an iMach3 P4-S Pendant. It had the same problem. I removed and re-installed mach3 and went through all the settings, and the problem persisted. I asked VistaCNC if they knew of a solution. They wrote a modified plugin that corrected the problem. Now I have a fully functional system thanks to their support. The benefit to all this is not just that I can use a pendant with my system, but the pendant is really awesome. The P4-S pendant gives precise control of the machine much better than the keyboard. If you run this configuration, you will have this problem. The imach pendant is incredible, and vistacnc supports their product which is really rare these days.
@davezallenzkie2406Ай бұрын
Syil sells a T5 and T7 machines . They are tap drill centers . Huge travels x600,x700 compared to S7 , Rapids are 48m/min. .i know they wont luimp off metal as well as a T7 though. Did they ever sell any anywhere ?? Searched for vids there is nothing except by syil itself. M/C weights are wrong in their own adverts 4500kg is not 4500 lbs. Communications with China is not good. I asked about unlocked parameters and was told the if door unlocked the program will stop . hmmm
@BrightNightTech2 ай бұрын
6 year old video and it still totally helped me. Thanks man!
@E3_Machine2 ай бұрын
2 Years later, what did you end up deciding? Similar machine discussions happening over here.
@machinists-shortcuts2 ай бұрын
It's good practice to set the end stop close to the centre of the reference face. It helps with future referencing and negates any out of squareness.
@lexugax2 ай бұрын
An X7 is a hobby mill? Damn.
@midwestkustomz63502 ай бұрын
The drill your using and the drill you posted the ad on is two different drills. The post one is variable speed and I think different hp. Just pointing that out because the ad one is much better for like slowing down the cuts.
@NerdlyCNC2 ай бұрын
maybe they changed the link. thanks
@midwestkustomz63502 ай бұрын
@@NerdlyCNC no worries, I only noticed because I'm looking to buy the one on your add. Thanks for your review!
@dylane.8942 ай бұрын
What kind of tool was that and also what is the Ø?
@NerdlyCNC22 күн бұрын
1" Haas High Feed End Mill
@timramsay29952 ай бұрын
Paper clip trick! Good one!
@nibbler22812 ай бұрын
This deserves way more thumbs up. Great vid
@Steelcrafted3 ай бұрын
I think I must be the only person who doesn't like retracts for linking moves on adaptive toolpaths....I keep my tool down and set a small lift and set the non cutting moves to like 200ipm, seems quicker than retracts and rapids and plunges....🤷🏻♂️
@chickensandw1tch3 ай бұрын
12:50 yay
@dutrajordan783 ай бұрын
Looks like a YG-1 tool
@tomahawkcnc55833 ай бұрын
I also have a super mini mill , a good machine but I won't ever buy another HAAS , the controller is too locked down , you can't even access such essential parameters as spindle encoder setting which you must change when a belt is changed. The only option is to get a tech out to set it for you at HUGE cost if no Hfo near you .
@jeffreymartin48903 ай бұрын
I have an older yellow table top X5 that I bought and want to get set up this summer. Mine has a 24K rpm spindle and runs off mach 3. I have not ran this machine yet. I think the new X5 enclosed minimill setups are sweet, but they are $24k and I think my mill new was around $10K and much more like a Tormach CNC, but with Hiwin bearings and ball screws. Can you compare the differences in the old yellow X5 vs the new X5? Do they use any of the same components? Can you upgrade an old X5 to a newer X5 in your opinion?
@t2nate1373 ай бұрын
Ball mills like the bottom up tool path so you remove most of the material with the side of the flute rather than the tip
@skeeterdirks39923 ай бұрын
I’m having an issue with a G73 drill cycle on my syil x7 with the syntec control. Watching your videos you seem to have a pretty good handle on the syil. Problem is this. When trying to execute a G73 instead of the drill saying I. The hole and only retracting like .100 above the last z position it comes all the way out to about .460 above the part then feeds back down to depth and repeats this but each time it comes less above the part. Like it’s backwards from what it’s supposed to be doing. But it does a G81 fine and if I just change the 73 to a 83 it runs the G83 perfectly. I’m at a loss. I’ve never had a machine do this before. Any help would be greatly appreciated thank you
@chris-lp4iw3 ай бұрын
This is amazing. I was going to purchase the 5th Axis quick locator. This is way better. Pricing is great too. Bought immediately after seeing this. Thank you for sharing.
@lorquettimothy3 ай бұрын
These little everyday task can eat your lunch on a new machine. Good idea to make these vids.
@badwolfdog3 ай бұрын
Thanks just received my new p4-s after watching your video. Nice bit of kit. Had to dail my cnc in after using the new pendent. It made it so easy. Working to hundreds of a mill on my 6040 cnc I'm out 0.003 of a mm so I'm good at 0.00 of a millimeter. It's the cnc not the pendent. Thanks again
@vaidyan53 ай бұрын
Really well made video...Unboxing was great and so were the attention to details etc. Well done...
@frp12763 ай бұрын
Super incredible tip...
@chriskwakernaat23283 ай бұрын
I always had the urge to make hop up options like this for tamiya. can't find an aluminium version of anything here.
@dmitrypolovin17763 ай бұрын
Get usb wifi adapter and make okuma wireless
@NerdlyCNC3 ай бұрын
we did...its on the network as "MD1"
@philipgentile56573 ай бұрын
always good ideas! thanks.
@waynemackenziesr50053 ай бұрын
Here's my comment. Since you never put out another video regarding the 60/40 CNC mill I am unsubscribing from this channel because it was totally a bait-and-switch