This customer ordered their machine with a pad holder, so we tested with a pad before shipping. If we really wanted to clean our floors, you're right -- a brush would be preferred! The squeegee we used is Tennant's Linatex which has a longer wear-life and perfect on most floors. Thanks for your comment! :)

Turn the machine off before charging.

Hai

A Reconditioned Tennant T7 32" Rider Scrubber sells for $12,900.00 USD. Using a free google currency converter, that is 1,077,550.20 Indian Rupees. If you would like a shipping quote, please email us at <[email protected]> Thank you!

We had this plugged into a standard GFCI outlet with no problem.

Good to know. Thanks for the feedback!!

This is a floor scrubber, but we sell the floor polishers too! Tell your school to call us :D

Couldn't find a great video for the T12, sorry! If you want a copy of the OM, email us at <[email protected]>

Hi there! If your T7 is leaking a lot of water, it is likely a bad solenoid. If it is a small amount, it could just be dripping from the brushes or pads. Regarding your winter season questions, would you mind reaching out to us directly for clarification at <[email protected]>? We look forward to hearing from you.

​@@SoutheasternEquipmentSupplyIncHi...I'm getting in touch with you regarding what we can use for winter months for salt build up on the floor. We have been lucky up to now as we literally have had no snow!! The previous machine this mall has had they have used vinegar .

The previous issue indeed was the solenoid. It was changed immediately and didn't have an issue after it was changed.

@@Stenuarts5287 I hope you saved money by purchasing it from us! 😉

@@Stenuarts5287 For cleaning up rock salt off hard floors: Make sure the floor is dry and start by vacuuming or sweeping as much of the salt as you can. Mix distilled white vinegar and water. Pour this into a spray bottle. Lightly spritz the mixture over the previously salted floors. Let the solution sit for about five minutes, then use your scrubber to scrub and dry.

Ние сме съгласни!

Благодаря за коментара!

¡Gracias por tu comentario!

Estamos ubicados en West Columbia, Carolina del Sur. Puede enviarnos un correo electrónico a <[email protected]>

Estamos ubicados en West Columbia, Carolina del Sur. Puede enviarnos un correo electrónico a <[email protected]>

We'd be happy to take a look! www.southeasternequipment.net/trade-in-sell-my-equipment-s/81.htm

Hi Carlos! Page 24 of the SC450 Operator's Manual troubleshoots insufficient water flow to the brush as a faulty solution solenoid valve or dirty solution filter. If you need a copy, email us at <[email protected]>

It's a safety feature, like beeping when you don't have your seatbelt on.

The absolute worst?! 😮

Desculpe, não falamos português

Lamentablemente no, ¡pero gracias por tu comentario!

Hi there, great question! You can order the ReadySpace Pre-Treatment Spray using this link: bit.ly/484i6Ix

Sounds like you may be referring to the AMR Robotic version of this unit. Give us a call at 803-252-0100

Hi there, it's likely there is an issue with the propulsion system if you are receiving that error. You can try powering off the machine, disconnecting then reconnecting the battery, and power it back on. If the issue persists, contact us at 803-252-0100 or <[email protected]>

@@SoutheasternEquipmentSupplyInc I tried all that and told my managers and it's been a while still broke need a maintenance person to fix it

@@boscohurley1341 If you're under warranty, call the Tennant distributor you purchased it from. If you're not under warranty, we can schedule a technician to come out. You would need to fill out a service request form here: bit.ly/3qFFn2w

Hi Ruby! A little water left in the solution tank is normal, just leave the lid open for it to air dry. If there is a significant amount of water left in the solution tank, there may be a clog somewhere -- possibly in the drain hose. If you still need assistance, give us a call at 803-252-0100, option 3 or email <[email protected]>.

Hi there, Page 38 of the T5 Operator's Manual lists four possible causes for an inoperable vacuum motor. For a copy, please email us at <[email protected]>

Hey Bobby, thanks for your question. Give us a call at 803-252-0100, option 3 to reach out Service Team!

It sounds like that could be a buffer or a burnisher, and since it's blue it could be made by Clarke. If you need help identifying further, send us a picture at <[email protected]> or check out our Buyer's Guides here: www.southeasternequipment.net/buyers-guides-s/72.htm

Somewhat of an exaggeration 😅 Realistically, at 69 decibels, its closer to the sound level of a normal conversation which makes it perfect for offices and other sound-sensitive spaces🤫

Hi Derek, might be a little tough to explain that here but you can find the instructions on pages 94 through 99 of the Tennant 7300 Operator's manual. If you need a copy, email us at <[email protected]>

Fresh out 😅

Since it's battery-powered, think of it like a golf cart. So no, unless you're on a hill :P

So do we! :D

Hi Joe, give us a call at 803-252-0100, option 3 to speak with our Service Team.

Certification is not required but it's highly recommend you familiarize yourself with any piece of equipment via videos and the operator's manual prior to operating.

Hi Eddie, give us a call at 803-252-0100 and we can assist you with this.

Hi Elizabeth, sorry to hear you're having some difficulty replacing the brush. You can troubleshoot this with Tennant Tech Support at 800-553-8033.

Follow the dilution ratio directions on the detergent you're using. If you would like some options, check out our Detergent Selector Guide here: bit.ly/3YBAZwN

Hi Jose, there is not a built-in heater for this machine so you could put hot water in the solution tank prior to carpet extraction.

Its still isnt working

Hi Lisa, sorry to hear that. You can call Nobles Tech Support at 800-553-8033 or fill out s Service Request Form here: bit.ly/3QGWycz